2BFOLELVANCY Levitating Moon Lamp User Manual

2BFOLELVANCY Levitating Moon Lamp

Specifications

• Base x 1
• Adapter x 1
• Moon Ball x 1
• User manual x 1
• Input: 100-240VAC
• Optional: Wireless charging for compatible phones
• Optional: Color-switchable light with three colors

Safety Precautions
Warning: The moon ball has a strong magnetic field. Keep away from metallic items to avoid injury.
Place the base on a flat surface free from magnetic materials to ensure proper operation.

Operating Instructions

1. Place the base on a flat surface free from magnetic materials. Connect the cable and plug the adapter into a 100-240VAC outlet.
2. Hold the moon ball with both hands, keeping the magnet side up.= Move the ball up until it locks in place due to magnetism, then release gently.
3. Use the switch to turn the Moon Lamp on or off.

Optional Features

Wireless Charging: If supported, place a compatible phone on the wireless symbol on the base for charging. Adjust the phone’s position if charging fails.
Color-Switchable Light: If available, cycle through three colors by toggling the switch.

FCC Caution
This device complies with FCC Rules. Avoid interference and maintain a minimum distance of 20cm between the device and your body.

FAQ

Q: Is the moon lamp safe to use around metallic objects?
A: The moon lamp has a strong magnetic field, so it’s best to keep it away from metallic items to prevent any accidents or injuries.

USER MANUAL

Thank you for purchasing the levitating moon lamp. To ensure proper operation and handling of the product, please read the instructions in the manual, which includes important safety information and correct procedures to avoid any mishandling and accidents.

What’s in the box

1. Base x 1
2. Adapter x 1
3. Moon Ball x 1
4. User manual x 1

WARNING
The moon ball has a strong magnetic field that can attract nearby metallic items, such as blades, scissors, or ironworks. Be cautious, as these items can pose a risk of injury if they are caught.
The product base should be placed on a flat surface. Do not place it on surfaces or materials affected by magnets, including iron, metals, or other magnetic items, as they may interfere with the operation of the product.

Operating instructions

1. Place the base on a flat surface that is free from ferriferous or magnetic materials. Connect the cable to the base, then plug the adapter into your outlet (100-240VAC).
2. Hold the moon with your double hands. Keep the side with the magnet upward, move the ball up. When moving to approximately 0.5 inches, once you feel a power (magnetism) lock the ball, then release your hand gently.
3.  Touch the switch to turn ON/OFF the Moon Lamp.

If it floats – Congratulations! You will become a master.

Optional wireless charging

If your lamp has wireless charging, place the phone on the base’s wireless symbol, and your phone will be charged. If charging fails, try moving the phone to find the correct position. This feature is suitable for phones with wireless charging functionality only.

Optional color-switchable light

If your lamp supports three colors, touch the switch to cycle through them—turn on, turn off, and then turn on again to get another color.

FCC Caution.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference, and
2. This device must accept any interference received, including interference that may cause undesired operation.

Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

*RF warning for Mobile device:
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>