PrimeAudio IWSPK2301 Bluetooth Disco Heart Speaker User Manual
- June 13, 2024
- PrimeAudio
Table of Contents
IWSPK2301 Bluetooth Disco Heart Speaker
User Manual
**Instruction Manual, 1 Sheet Folded Printed Both Sides
**
OUTSIDE PRINT
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to part 15 of the FCC Rules. These limits ore
designed to provide reasonable protection against harmful interference in o
residential Installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation. If this equipment does couse harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on, the user is
encouraged to try to correct the interference by one or more of the following
measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
CAUTION: Any changes or modifications to this device not explicitly
approved by manufacturer could void your authority to operate this equipment.
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may couse undesired operation.
The device has been evaluated to meet general RF exposure requirement. This
equipment should be installed and operated with minimum distance 20cm between
the radiator& your body.
BATTERY SAFETY : This product Is fitted with a Li-Polymer battery. Do not
damage, open or dismantle the battery and do not use it in damp and/or
corrosive conditions. Only use compatible chargers. Never dispose batteries in
a fire and never expose them to high temperatures. Do not expose the product
to temperatures exceeding GO°C (140°F).
BATTERY DISPOSAL : The crossed-out wheeled-bin symbol means that you may
not dispose of this product together with general household waste; instead,
take it to a recycling point for electrical and electronic equipment. For more
information about local recycling points, contact your local authority, civic
amenity site or the business where you purchased this product. The separate
collection and recycling of used items of electrical and electronic equipment
prevents any harmful substances they contain from harming human health and
polluting the environment. Please keep this information for later reference.
WARNING!
RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE. DISPOSE OF USED
BATTERIES ACCORDING TO THE INSTRUCTIONS.
Product Diagram
Instruction Manual
BLUETOOTH® WIRELESS SPEAKER
FEATURES
- Works with all Bluetooth?-enabled devices.
- Stream audio wirelessly via Bluetooth® technology in high, uncompromising quality from up to >10 m away.
- Integrated rechargeable lithium-ion battery provides hours of playing time wherever you go.
SPECIFICATIONS
- Rechargeable Battery: Li-lon 800mah
- Wireless Capability: Up to 33ft range
CONTENTS
- 1 Wireless Speaker
- 1USB Charging Cable
- User Manual
- Supply Voltage: 3.7V
- Driver Diameter: 40 mm/4N 3W
- Nominal Impendence: 40
- Frequency Response: 2OHz – 2OkHz
- Sensitivity: 80dB
CHARGING THE BATTERY
The internal Lithium-lon battery must be fully charged before first use of
the speaker.
To charge the battery:
- Insert the smaller USB TYPE-C connector of the included USB cable into the charging Input port on the back of the speaker unit
- Insert the larger USB connector into either the USB port on a computer OR into a compatible USB DC SV wall charger (not included) to charge through a stondard wall outlet. The indicator lights will be red while charging, and will turn off when charging is complete.
WIRELESS SPEAKER OPERATION
Wireless playback Via Bluetooth:
- Make sure the battery is charged as explained above.
- Press and hold the M button for 2 vseconds to turn the speaker on, the Disco ball/Heart will spin, a tone will signal to remind you to connect your Bluetooth device.
- Activate Bluetooth function on your smartphone/computer/audio source device — it should automatically recognize the speaker unit and allow you to select it using the name “PrimeAudio”. Another tone will indicate when connected successfully and you are now set to enjoy wireless audio from within o 33ft range of the audio device.
- Press the M button to switch between Bluetooth mode and FM mode.
- Short click the < button to move to the previous song in Bluetooth mode or search down the channel in FM mode.
- Press and hold the the < button to lower the volume.
- Short click the > button to move to the next song in Bluetooth mode or search up the channel in FM mode.
- Press and hold the the > button to raise the volume.
- Press and hold the M button to turn off the speaker.
Finished Appearance {EXAMPLE)
PACKAGE WITH:
PABS-1001-RD
COLORS:
DATE: 09/05/2023
DESIGNER: 0Kevin Candela
kecallstate@gmail.com
NOTES: Artwork is 100% scale
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>