ergotron NX Monitor Arm User Guide

June 15, 2024
ERGOTRON

ergotron NX Monitor Arm User Guide

FIG 1.JPG

www.ergotron.com | USA: 1-800-888-8458 | Europe: +31 (0)33-45 45 600 | China: 400-120-3051 | Japan: japansupport@ergotron.com

FIG 2.JPG

FIG 3.JPG

FIG 4.JPG

FIG 5.JPG

FIG 6.JPG

FIG 7.JPG

FIG 8.JPG

FIG 9.JPG

Learn more about ergonomic computer use at: www.ergotron.com/ergonomics

Safety

CAUTION: PINCH HAZARD. Do NOT place hand under monitor mount. Doing so may cause personal injury.

CAUTION: Pivot lock must be installed. Failure to follow these instructions will result in an unstable situation that may cause equipment damage and/or personal injury.

Caution: Leave enough slack in cable to allow full range of motion.
To avoid the potential to pinch cables it is important to follow the cable routing instructions in this manual. Failure to follow these instructions may result in equipment damage or personal injury.

Warning: Because mounting surface materials can vary widely, it is imperative that you make sure mounting surface is strong enough to handle mounted product and equipment.

FIG 13.JPG

FIG 14.JPG

For the latest User Installation Guide please visit: www.ergotron.com
For Warranty visit: www.ergotron.com/warranty
For Service visit: www.ergotron.com
For local customer care phone numbers visit: http://contact.ergotron.com

NOTE: When contacting customer service, reference the serial number.

FIG 15.JPG

www.ergotron.com I USA: 1-800-888-8458 | Europe: +31 (0)33-45 45 600 | China: 400-120-3051 | Japan: japansupport@ergotron.com
0 2023 Ergotron, Inc. All rights reserved.

While Ergotron, Inc. makes every effort to provide accurate and complete information on the installation and use Of its products, it will not be held liable for any editorial errors Or omissions (including those made in the process of translation from English to another language), or for incidental, special or consequential damages of any nature resulting from furnishing this instruction and performance of equipment in connection with this instruction. Ergotron, Inc. reserves the right to make changes in the product design and/or product documentation without notification to its users. For the most current product information, or to know if this document is available in languages other than those herein, please contact Ergotron. No part of this publication may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording or otherwise without the prior written consent of Ergotron, Inc., 1181 Trapp Road, Eagan, Minnesota, 55121, USA
Patents Pending and Patented U.S. & Foreign. Ergotron is a registered trademark Of Ergotron, Inc.

Read More About This Manual & Download PDF:

References

Read User Manual Online (PDF format)

Loading......

Download This Manual (PDF format)

Download this manual  >>

Related Manuals