GLOBAL INDUSTRIAL 812547 Single Charging Station User Manual

User’s manual Single Charging Station
Model: 812547

812547 Single Charging Station

Read this manual thoroughly prior to installation, operation or maintenance. Keep these instructions in a safe location for future reference. For questions, visit globalindustrial.com or contact Customer Service at 1-800-6451-800-645-2982.
WARNING

• Failure to follow installation instructions will void warranty.

• When plugging in or pulling out the battery, please be cautious about the operation to avoid pins damage;

• The product should be kept away from fire, hightemperature environments, and humid and rainy environments during use and storage, otherwise it may lead to dangerous situations.

• Non-professionals should not disassemble it by themselves.

• Do not discard the product at the end of its service life.
  Recycle the product according to local laws and regulations.

• This product should be protected from rain, water immersion, moisture, and violent vibration during transportation.

• It cannot be used at an altitude exceeding 2000m.

• Do not drop, squeeze, or collide with the product, so as not to subject the product to external pressure, which may cause a short circuit of the internal circuit of the product and damage to the battery.

• After use, please turn off the machine in time

• Please charge by the supplied power cord. Please apply the specified battery.

• When the product accidentally drops into the water while using, please unplug the input socket and place it in a safe and open area. The product shall not be turned on.

• While using or delivering the product, its screen should be carefully protected from strike.

• When the product is on, it is forbidden to touch pins in the battery compartment with hands or metal devices.

Technical parameters

Constant Current and Constant Voltage
Battery| LiFePO4 8S  20/25AH
Product Size| 10.23 x 10.55 x 10.47 inch（LWH）
Product N.W.| 9.19 lbs
Product G.W.| 12.21 lbs
Working Environment| 14-104°F
Relative Humidity≤80%
Altitude≤2000M
Transport and Storage Environment| Temperature:  5-131 °F
Relative Humidity≤93%（no condensation）
Atmosphere Pressure:70kPa～106kPa

Application and Function Instruction:
A single charging station uses an internal charger with constant current and voltage to charge the battery. When the battery needs to be charged, it can be inserted into the plastic station to complete the process. This product can protect itself from input overcurrent. What’s more, the charger output voltage is the DC safe one, which has functions like short circuit and anti-reverse connection protection, and no-load impulse.
The product has a 1.7-inch LCD screen, which displays charging prompt and high-precision battery capacity when charging.
Product Main Structure Composition
The charging station is mainly composed of a sheet-metal base, battery plastic base, charger, and LCD screen.

Operation and Usage

1. Check whether there is any visible damage to the appearance of the product and whether the input socket or the battery pins are loose or damaged (If abnormal conditions occur, stop using).
2. Plug one end of the supplied power cord into the AC socket on the back and connect the other end to the mains.
3. Plug one battery or two batteries into the plastic battery compartment in the product.
4. Turn on the power switch on the back of the product and check the screen. At this point, the battery grid icon on the display screen will flash to indicate that it is charging.
5. Turn off the power input switch and pull out the battery after charging.

Product Maintenance

1. Socket contacts in the battery compartment are fragile so they should be inspected regularly. The deformed or cracked one should be replaced. Otherwise, it may cause charging failure.
2. Regularly remove dust and dirt from the heat dissipation window.
3. Regularly check whether the external screws and lifting rings of the chassis are fully tightened.

Troubleshooting

the range of the product specification.
• Check whether the fuse inside the input socket is damaged.
• Check whether the over-current protector on the back is disconnected.
• Check whether the power cord is in open-circuit or broken.
Unable to Charge| • Confirm whether the battery is completely inserted into the battery compartment and the sockets in the bottom of the battery should be completely connected to the battery station pins.
• Check whether the battery station pins are deformed or falling off.

Customer Service
US: 1-800-645-2986

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>