COMMSCOPE TC-1443-SIP BUDI-M SKIRTS Instruction Manual
- June 13, 2024
- CommScope
Table of Contents
- Open the skirts
- Rotate fasteners counterclockwise to unlock and lift off the cover.
- Mount the skirt
- Place the SKIRT against the wall, with its top surface flush with the
- All trademarks identified by ® are registered trademarks in the US and
- Conduits
- If a conduit fitting is required, drill hole along side or bottom using a
- Organize cables
- Arrange the cables and the pigtails in the SKIRT with respect to their
- Remount the cover
- References
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
**COMMSCOPE TC-1443-SIP BUDI-M SKIRTS Instruction Manual
**
Open the skirts
There are 2 kits available, a 36”L SKIRT kit (image left) and a 15”L SKIRT kit (image right).
Rotate fasteners counterclockwise to unlock and lift off the cover.
Mount the skirt
Place the SKIRT against the wall, with its top surface flush with the
bottom of the BUDI-M box.
Note: center the SKIRT with the BUDI. Leave at least one inch space
between the bottom of the SKIRT and the final grade for cover removal. If a
duct for dropcable is present, position it in the lower right quadrant of the
skirt opening.
All trademarks identified by ® are registered trademarks in the US and
may be registered in other countries. All third party product names,
trademarks and registered trademarks are property of their respective owners.
This product may be covered by one or more U.S. patents or their foreign
equivalents. For patents, see www.cs-pat.com. This document is not intended to
modify or supplement any specifications or warranties relating to CommScope
products or services. Visit our website or contact your local CommScope®
representative for more information.
www.commscope.com.
For technical assistance, customer service, or to report any
missing/damaged parts, visit us at: http://www.commscope.com/SupportCenter
Conduits
If a conduit fitting is required, drill hole along side or bottom using a
hole saw bit. Reference pre-molded knock outs for conduit location and placement. Conduit can be installed to all sides except the top.
Organize cables
Arrange the cables and the pigtails in the SKIRT with respect to their
bend radius
Remount the cover
Re-mount the cover of the SKIRT and rotate the fasteners clockwise to lock. Refer to the BUDI-M installation instruction for cable and pigtail installation. Assemble BUDI-M cover to BUDI-M box.© 2022 CommScope, Inc. All Rights Reserved
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>