UPLIFT DESK MVT013 Elevate Footrest User Guide
- June 4, 2024
- UPLIFT DESK
Table of Contents
Elevate Footrest
SKU: MVT013
Package Contents
Step
1
Paying attention to the orientation, insert the Handle into the tubes on the
Base as shown until the spring pins click into place. You may need to depress
the spring pins slightly with your finger to get them into the base.
Step
2 A. Estimate the Platform height you prefer by holding it next to the
Handle and Base assembly. If the use will be similar to a bar foot rail while
standing, we recommend setting the Platform height to around 7” using the
second hole from the bottom in the Handle.
B. Holding the Platform vertically as shown, insert the hooks on the back of
the Platform into the holes along the handle that you selected in the previous
step. Make sure the Handle holes are at the same height on each side so the
Platform sits level.
C. Rotate the Platform down until the back of the Platform rests against the
Handle
Step 3 (optional)
A. If you choose to place the Platform directly on the floor without using the
base, first put an End Cap on each of the Platform’s hooks.
B. Remove the paper backing from each of the four Pads and place them on the
bottom of the Platform.
Adjustment Information
Adjust the height of the Platform
A. To adjust the height of the Elevate Footrest, rotate the Platform up to
disengage the Platform’s hooks from the Handle. See Steps 2B and 2C for
details on removing and installing the Platform into the
Handle at the new height.
B. Determine how much higher or lower you would like the Platform to be and
select the holes on the Handle that would best position the Platform at that
height.
- There are six height options available on the Handle, or you can rest the Platform on the floor.
CAUTIONS & WARNINGS
CAUTION: Read all instructions before assembly. Failure to assemble or
operate properly may result in damage or personal injury. Retain the manual
for future reference.
CAUTION: This product must be used on a level surface for proper
stability.
CAUTION: Only use this product when assembled per instructions.
WARNING: Do not stand or sit on the Elevate Footrest.
WARNING: Never use this product if it does not perform according to this
sheet.
Due to continual improvement of products, illustrations and photographs may
not reflect the exact product appearance.
Copyright Notice : These instructions are a component of this accessory.
These instructions are part of the scope of delivery, even if the item is
resold. These instructions are also available on the UPLIFT Desk website:
uplift- desk.com. Excerpts or copies may not be forwarded to third parties or
used in any other published form without the prior written consent of the
UPLIFT Desk. These instructions are subject to United States copyright law.
© UPLIFT Desk
800-349-3839
info@upliftdesk.com
upliftdesk.com
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>