BOOMPODS ORBIT ANC Hybrid Noise-Cancelling User Guide
- June 13, 2024
- Boompods
Table of Contents
BOOMPODS ORBIT ANC Hybrid Noise-Cancelling
In the box
Overview
How to Connect
Power on headset and it will auto turn connectable. On phone, search “orbit” and tap to connect. It will auto reconnect to the last device in connectivity record. If you want to make search again, power it off and press and hold MB for 4s.
Multi-Point Connection
Connect as above, then switch off Bluetooth on that device and start pairing procedure on 2nd device. You will now then have a choice of 2 device to play from.
Functions
Power-on: Hold MFB for2s
Power-off: Hold MFBfor4s
Answer/end call: Press MFB
Ignore call: Hold MFB for l.Ss
Skip track backward: Hold Volume-for ls
Skip track forward: Hold Volume+ for ls
Volume up: Press Volume+
Volume down: Press Volume-
Voice assistant: Triple press MFB
Playback/pause: Press MFB
Gaming mode: Double press MFB
Switch mode: Press ANC Button to switch among ANC ON, ANC OFF and
Transparency.
When ANC ON, double press ANC button to turn ON/OFF “Adaptive· mode (you will
hear a musical tone).
Factory Setting
Power on headset, press and hold both volume+ and – for 1 Os or until LED blinks red 3 times to reset it factory
LED
Connected: LED blinks white every 10s Charging: LED glows solid red Top-up: LED glows solid white
FCC Statement
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation.
This equipment generates uses and can rad iate radio frequency energy and, if
not installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment
does cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try
to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions:
(1lThis device may not cause harmful interference, and (2) this device must
accept any interference received, including interference that may cause
undesired operation.
Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
CUSTOMER SUPPORT
BOOMPODS is a trademark of BOOMPODS LTD. BOOMPODS ©2023 All Rights.
BOOMPODS Ltd (UK), Norwich NRl l 7 AQ, UK.
BOOMPODS (EU), Granica, 05-806, PL.
info@boompods.com Registered No: 08147066. Made in
China.