hama 00125115 Active Stylus Scribble User Manual

hama 00125115 Active Stylus Scribble

Product Information The Hama Active Stylus is an input device that allows you to write and draw on compatible touch screen devices. It comes with a USB-C charging socket, an On/Off button, and a Status LED. The stylus is powered by a Li-Po rechargeable battery that has a typical capacity of 140mAh/0.52Wh and a minimum capacity of 130mAh/0.48Wh. The stylus weighs 14g and has a size of 165 x 9mm. It is compatible with iPad OS14 or later and supports multiple languages.

Controls and Displays

1. USB-C charging socket
2. On/Off button
3. Status LED

Package Contents

• Active Stylus
• USB-C charging cable
• User manual

Safety Instructions Do not dispose of the batteries/rechargeable batteries in fire.
Use only original accessories or accessories approved by Hama to avoid damage to the product. Keep the stylus away from magnets as it may cause damage. Clean the touch screen before use to avoid scratches.

Technical Data

• Power supply: 5V/1A
• Current consumption: 5V 120mA
• Battery type: Li-Po
• Min. capacity: 130mAh/0.48Wh
• Typ. capacity: 140mAh/0.52Wh
• Weight: 14g
• System requirement for Scribble function: iPad OS14 or later,
  Language support

Product Usage Instructions

1. Charge the stylus battery using the USB-C charging cable and a power source with 5V/1A. Insert the USB-C charging cable into the charging socket (1) of the stylus and connect it to the power source. The status LED (3) will light up red to indicate that the battery is charging.

2. Turn on the stylus by pressing the On/Off button (2).

3. Use the stylus to write or draw on compatible touch screen devices.

4. When the battery is low, the status LED (3) will blink red.
   Charge the stylus battery as described in step 1.

5. Do not use the stylus with a display protector or protective glass as it may restrict the function of the input stylus. Clean the touch screen before use using a lint-free, slightly damp cloth and do not use any harsh cleaners.

6. If you sell the stylus, please pass these operating instructions on to the new owner.

Controls and displays

1. USB-C charging socket
2. On/Off button
3. Status LED

Thank you for choosing a Hama product.
Take your time and read the following instructions and information completely. Please keep these instructions in a safe place for future reference. If you sell the device, please pass these operating instructions on to the new owner.

Explanation of warning symbols and notes

Warning
This symbol is used to indicate safety instructions or to draw your attention to specific hazards and risks.

Note
This symbol is used to indicate additional information or important notes.

Package contents

• Active “Scribble” input stylus
• USB-C cable
• These operating instructions

Safety instructions

• The product is intended for private, non-commercial use only.
• Do not use the product in the immediate vicinity of heaters, other heat sources or in direct sunlight.
• Protect the product from dirt, moisture and overheating and use it in dry rooms only.
• As with all electrical products, this device should be kept out of the reach of children.
• Do not drop the product and do not expose it to any major shocks.
• The battery is integrated and cannot be removed. Dispose of the product in accordance with legal regulations.
• Do not open the device or continue to operate it if it becomes damaged.
• Do not operate the product outside the power limits given in the specifications.
• Do not continue to operate the product if it is visibly damaged.
• Children must not play with the device. Cleaning and user maintenance must not be carried out by children without supervision.
• Do not modify the device in any way. Doing so voids the warranty.
• Dispose of packaging material immediately in accordance with the locally applicable regulations.
• Do not incinerate the battery or the product.
• Do not tamper with or damage/heat/disassemble the batteries/rechargeable batteries.

Start-up and operation

Note
Use only original accessories (or accessories approved by Hama) to avoid damage to the product.

Warning – magnet

• Keep bank cards or similar cards with magnetic strips away from the magnet. The data on the cards’ magnetic strip could be damaged or completely deleted.
• People with pacemakers should keep away from magnets. The magnet can negatively affect the function of the pacemaker.

Charging the battery

Warning – rechargeable battery

• Only use suitable charging devices or USB ports for charging.
• Do not use defective chargers or USB ports and do not attempt to repair them.
• Do not overcharge the product or allow the battery to completely discharge.
• Avoid storing, charging and using in extreme temperatures and at extremely low atmospheric pressures (such as at high altitudes).
• When stored over a long period of time, batteries should be charged regularly (at least every three months).
• The product contains a rechargeable battery.
• Fully charge the product once before using it for the first time.
• Connect the supplied USB charging cable to the USB connection (1) on the product.
• Connect the free plug on the USB charging cable to a suitable USB charger.
• To do this, consult the operating instructions for the USB charger you are using.
• The status LED (3) lights up solid red during the charging process. Once the battery is fully charged, the status LED (3) lights up green.

Note – charging process / battery capacity

• A complete charging cycle takes about 90 minutes.
• The input stylus’s rechargeable battery can be charged both when it is switched on and off. If the battery capacity is less than 10%, the status LED (3) flashes slowly blue and after around 10 seconds switches itself off automatically.
• The actual battery life will vary depending on how you use the device, the settings and the environmental conditions (batteries have a limited life).

Note – Automatic switch-off
Please note that the input stylus will switch itself off after 5 minutes of inactivity.

Note – Damage to the display
To avoid damage to the display, please note the following points:

• Avoid exerting excessive pressure on the display with the input stylus.
• Ensure that the display and input stylus are clean before use. Small pieces of dirt such as grains of sand can cause scratches when the input stylus is being used.

Note – Display protector / protective glass
Using display protectors / protective glass can lead to the function of the input stylus being restricted.

• Press the On/Off switch (2) to switch the input stylus on. The status LED (3) lights up solid blue.
• Press the On/Off switch (2) to switch the input stylus off. The status LED (3) goes out.

Care and maintenance
Only clean this product using a lint-free, slightly damp cloth and do not use any harsh cleaners.

Warranty disclaimer
Hama GmbH & Co KG assumes no liability and provides no warranty for damage resulting from improper installation/mounting, improper use of the product or from failure to observe the operating instructions and/or safety notes.

Technical data

– Language support

Hama GmbH & Co KG 86652 Monheim / Germany

Service & Support

www.hama.com
+49 9091 502-0

All listed brands are trademarks of the corresponding companies. Errors and omissions excepted, and subject to technical changes. Our general terms of delivery and payment are applied.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>