MH LONDON MH-ST-333 Sammy Gold Iron Floating Shelf Instructions
- October 30, 2023
- MH LONDON
Table of Contents
MH LONDON MH-ST-333 Sammy Gold Iron Floating Shelf
Product Information
The product is a set of wall shelves available in six different models: MH- ST-333, 334, 335, 336, 337, and 338. The estimated installation time is 10 minutes and the installation requires at least one person. The package includes one shelf (A), four screws (B), and four wall plugs (C). The product should be cleanedregularly with a soft and dry cloth to protect the finish. Abrasive cleaners should be avoided to prevent damage. In case of missing or damaged parts or delivery problems, customers can reach out to the company for assistance.
Product Usage Instructions
- Put on mood music before starting the installation process.
- To prevent damage to the product, use the clean side of the package carton or rug as a working surface.
- If there are any missing or damaged parts or delivery problems, contact the company for assistance.
- Clean the product regularly with a soft and dry cloth. Avoid using abrasive cleaners and wipe up spills immediately.
- Place the shelf (A) on the wall and use a spirit level to check its alignment. Adjust it until it is straight.
- Once the shelf is in a straight alignment, make marks on the wall through the predrilled holes on the shelf.
- Drill holes at the points you just marked.
- Using a hammer, insert wall plugs (C) inside the hole.
- Place the shelf (A) so that the predrilled holes on it are right above the wall plugs. Fix the screws (B) into the wall plugs over the shelf. Use a screwdriver to make sure they are secure.
- Voila! Your shelf is now installed and secure!
- estimated installation time
- people required
Ok, let’s get started
- Put on mood music!
- To prevent damage to product, use the clean side of package carton or rug as working surface.
- In the event of missing or damaged parts, delivery problems etc., please reach out to our team.
- We will be happy to fix the problem!
care guide
- Clean regularly with a soft and dry cloth.
- To protect finish, avoid use of abrasive cleaners.
- Wipe up spills immediately. Please!
product parts
what’s included
Installation instructions
Friendly Tip: Take a deep breath going on. This is easy even if you are not used to tools. Just follow these steps to the T, and the outcome will be worth it!
step 1: Place the shelf (A) on the wall and put a spirit level on it to check its alignment. Adjust till the angle is straight.
step 2: Once the shelf is in a straight alignment, make marks on the wall through the predrilled holes on the shelf.
step 3: Drill holes at the points you just marked.
step 4: Using a hammer, insert wall plugs (C) inside the hole.
step 5: Place the shelf (A) so that the predrilled holes on it are right above the wall plugs. Fix the screws (B) into the wall plugs over the shelf. Use a screwdriver to make sure they are secure.
Voila! Your shelf is now installed and secure!