Micromax A065 Bolt With 4 Inch Display User Guide

Table of Contents

Main body

a. Hardware Layout

b, Charging

The phone (1) charges at 33W, allowing charging from 0% to 100% in just 76 minutes with wired fast charge and a compatible fast charge adapter.
Alternatively, using the wireless 15W charger will completely charge the device in 130 minutes. To use wireless charging, place the device face up on a compatible wireless charger.

c. Navigation

3-button navigation
• Back: return to the previous screen or reverse the last action.
• Home: return to the home page of the launcher.
• App switcher: open the app switcher to change to a recently opened app or to free up memory by “killing” app processes.
Gesture navigation
• Back: swipe inwards from the left or right edge of the screen.
• Home: swipe up from the bottom edge of the screen.
• App swithcr: swipe up and hold from the bottom edge of the screen.

d. Launcher
i. Home page
ii. App drawer
iii. Widgets
e. Quick Settings / Notifications

Pull down from the status bar to access the quick settings & notification centre. In the quick settings, tap each tile to toggle each feature. The tile can also be long pressed to directly access more detailed settings.
Pull down a second time to access the expanded quick settings. Swipe left and right to access more quick settings tiles. ress the edit (pencil) icon and drag the tiles to customize the layout.

a. Network

To change your Network settings, either drag down the quick settings panel and long press the first tile on the top left, or open the Settings app and tap on “Network & Internet”.
To connect to wifi, tap on the wifi menu item and turn on the Wifi toggle. Proceed to select the wireless network of your choosing and enter the password.
Internet sharing can also be turned on here on this page. To do so, simply tap on “Hotspot & Tethering” to select the preferred method and proceed to set it up. This option can also be easily accessed through quick settings.

b, Connected Devices

To connect to a Bluetooth device, either drag down the quick settings panel and long press the second tile to the top right, or open the Settings app and tap on “Connected devices”
Tap on “Pair new device” and select on the target device to connect to it.

c. Installing / Deleting Apps

Installing
Note: If this action is performed on the home screen, the zone will be marked as “Remove”, which only removes the icon from the home screen and will not uninstall the app.

d. Battery

The phone (1) uses a 4500mAh battery which should last a whole day of medium to heavy usage. If the battery is running low, enable Battery Saver mode by either tapping on the “Battery Saver” tile in quick settings, or pressing the Low Power notification that appears automatically when the device’s battery falls under 15%
The phone (1) optimizes its long term battery health by reducing the charging speed overnight when an alarm is set, to avoid trickle charging while ensuring that the device only becomes fully charged close to the wakeup time.

e. Storage

To check the available storage on the device, open the Settings app and tap on “Storage” to get an overview of the storage consumption of each type of tiles.
To clear app storage or wipe app cache, open the Settings app and tap on “App” then “All apps” to view all installed apps and the respective storage each app is using. Tap on a select app to enter its “More info” page which shows the two buttons for either clearing storage or clearing cache.

f. Sound & Vibration

Press the physical volume up or down button on the side of the device to adjust the volume for the most recently used audio source and open the audio menu.
In the audio menu, tap on the top most bell icon to change between the “Ring mode”, “Vibration Only”, and “Silent mode”.
In the audio menu, tap on the bottom three dots icon to open a slider menu with four sliders to adjust the volume of media volume, call volume, ring & notification volume, and alarm volume respectively.

g. Glyphs
h. Security

To change the unlocking method, open the Settings app and find the “Screenlock & Security” option. Enter the page to set the unlocking PIN, record additional fingerprints, or record facial data used for unlocking the device.
Note: Fingerprint / face data unlocking cannot be used without a PIN as otherwise anyone could simply swipe to unlock the device.

i. About Phone (1)

Contains all the device specific information such as hardware information, phone number etc.
Press on the device name to edit how the phone (1) appears on other devices.
If there is a new software update available for the device, a red number (1) will show up next to the NothingOS version.
Tap 9 times, you know where…