COMMSCOPE NVX-UMB-NN-SS SM-BK Universal Mounting Bracket S Instruction Manual

June 13, 2024
CommScope

TC-1461-IP Rev. B, June 2023
NOVUX™ Fiber Optic System
NVX-UMB-NN-SS/SM-BK: Universal mounting bracket S
Installation Instructions

Applicable for CC 40/100 and HT products

Kit content

| Description| Qty kit NVX-UMB-NN-SS-BK| Qty kit NVX-UMB- NN-SM-BK
---|---|---|---
1| Universal Mounting Bracket Small (small handle)| 1| 0
2| Universal Mounting Bracket Small (medium handle)| 0| 1

Note: Note that only 1 product is delivered per kit depending on the kit ordered.

PRODUCT SIZE| NVX-UMB-NN-SS-BK SMALL Handle (1)| NVX-UMB-NN-SM-BK MEDIUM Handle (2)
---|---|---
Product size width < 12 cm (4.7 Inches)| |
Product size width > 12 cm (4.7 Inches)| |

Mount the UMB-S

Depending on the use, there are several options for mounting the UMB.

  1. Mount the UMB on a flat surface with 4 screws.
    Note: Wall mounting is not allowed in USA due to lack of UL Listing.

  2. Mount the UMB on a flat surface or onto a pole with 2 screws.

  3. Mount the UMB onto a pole with 2 straps.
    Note: Mounting hardware is not a part of the kit.

Install the closure onto the UMB S

  1. Secure the closure onto the UMB S with the features highlighted.
    Note: Make sure the handle is positioned centered in the bracket before installing the closure onto the UMB.

  2. Move the closure to the mounting bracket. Then slide the closure downwards.

  3. When a click sound is noticed, the closure is properly locked.

Detach the closure from the UMB S

  1. The handle can be pushed left or right to unlock the closure.
  2. Push the handle to one side.
  3. Lift and remove the closure.
    Note: Verify that the handle is centered again.

© 2023 CommScope, Inc. All Rights Reserved
All trademarks identified by ® are registered trademarks in the US and may be registered in other countries. All third party product names, trademarks and registered trademarks are property of their respective owners.
This product may be covered by one or more U.S. patents or their foreign equivalents. For patents, see www.cs-pat.com.
This document is not intended to modify or supplement any specifications or warranties relating to CommScope products or services. Visit our website or contact your local CommScope® representative for more information. www.commscope.com.
For technical assistance, customer service, or to report any missing/damaged parts, visit us at: http://www.commscope.com/SupportCenter.

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

CommScope User Manuals

Related Manuals