WATTS Vision BLK01 RF Wireless Leak Sensor Instruction Manual
- June 13, 2024
- WATTS
Table of Contents
- WATTS Vision BLK01 RF Wireless Leak Sensor
- Product Information
- Product Usage Instructions
- General information
- Presentation
- Box contents
- Product description
- Pairing with Vision Central unit
- Compatibility
- Batteries replacement
- Technical characteristics
- Dimensions
- Contact Information
- References
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
WATTS Vision BLK01 RF Wireless Leak Sensor
Product Information
| Product Name | BLK01 RF |
|---|---|
| Application | Wireless Leak Sensor |
| Manufacturer | Watts Electronics |
| Website | [ |
https://wattswater.eu/catalog/regulation-and-control/watts-vision-smart-home
/wireless-leak-sensor/](https://wattswater.eu/catalog/regulation-and-control
/watts-vision-smart-home/wireless-leak-sensor/)
Part Numbers| P08630 (Type BT-CT03 RF-WiFi), P08702 (Type BT-CT03
RF-WiFi)
Battery Type| 2 x AA LR06 1.5V Alkaline batteries (included)
Operating Temperature| 0°C to 100°C
Shipping and Storage Temperature| -20°C to 60°C
Operating Humidity| 0% to 100% humidity
IP Waterproof Class| IP67
Radio Frequency| 868 MHz
Dimensions| Not specified
Product Usage Instructions
To pair the device with a controller:
- Turn the device into pairing mode by pressing the button for 3 seconds.
- The green LED will flash once and then blink orange for 30 seconds during pairing.
To replace batteries:
- Unscrew the bottom of the product.
- Replace both AA batteries with new ones.
For more detailed product information, please refer to the product details page on wattswater.eu.
General information
Safety warnings and operating instructions
- This product should be installed preferably by a qualified professional. Subject to observation of the above terms, the manufacturer shall assume the liability for the equip-ment as provided by legal stipulations. All instructions in this Installation & Operation manual should be observed when working with the controller.
- Failures due to improper installation, improper use or poor maintenance are voiding manufacturer liability.
- Any attempt to repair voids the responsibility and the obligation to guarantee and replacement from the manu-facturer.
- Risk of explosion if battery is replaced by an incorrect type.
- This device may be used by children aged at least 8 years and by people with reduced physical, sensory or mental capabilities or lack of experience or knowledge, if they are properly supervised or if instructions relating to the safe use of the device have been given to them and if the risks involved have been understood. Children should not play with the device. Cleaning and user maintenance must not be carried out by children without supervision.
Disposal and recycling information
- The full text of the EU declaration of conformity is available at the following internet address: www.wattswater.eu.
- 2012/19/EU (WEEE directive): Products marked with this symbol cannot be disposed of as unsorted municipal waste in the European Union. For proper recycling, return this product to your local supplier upon the purchase of equivalent new equipment, or dispose of it at designated collection points. For more information see: www.recycle-this.info.
- 2006/66/EC (battery directive): This products contains a battery that cannot be disposed of as unsorted municipal waste in the European Union. See the product documenta-tion for specific battery information. The battery is marked with this symbol, which may include lettering to indicate cadmium (Cd), lead (Pb), or mercury (Hg). For proper recycling, return the battery to your supplier or to a des-ignated collection point. For more information see: www.recyclethis.info.
Application
The BLK01 RF wireless leak sensor has been designed to quickly detect any
water leaks in the house. An audible alert is triggered to warn people present
in the home.
Please refer to « Quick Installation Guide » for leak sensor BLK01 RF installation.
https://wattswater.eu/catalog/regulation-and-control/watts-vision-smart-home /wireless-leak-sensor/
Presentation
- The Vision® wireless leak sensor BLK01 RF is a radio frequency (RF) water leakage detector designed to work alone or it can be linked with the Vision® system Centrale Unit, providing protection against costly water damage.
- If a leak is detected, the unit will produce both audible and visual alarms locally. When paired with the Vision® system Centrale Unit, it will also send a push notification on your Watts Vision application on your mobile phone.
- You can pair the Vision® system Centrale Unit with up to 25 Vision® wireless leak sensor BLK01 RF throughout your home in areas where there is a risk of water leakage such as near a washing machine or hot water heater.
Box contents
Product description
Led information
Orange blinking| Device not paired by RF
Green led steady| Device linked by RF with a controller
Red blinking| Low battery indicator
Red led steady| Sensor Error
Green / Red blinking + buzzer| Leak detected
Pairing with Vision Central unit
-
Turn into pairing mode by pressing the button for 3s.
The green led flashes once and blinks orange for 30s during pairing. -
Open the installation menu on your Vision® Central unit:
-
Select radio pairing menu
-
Select Leak sensor
-
Start pairing search
-
Follow the instructions given by the Centrale unit
If pairing is successful, the green LED will be steady when pressing the button. The Vision® wireless leak sensor BLK01 RF will appear in the complete installation menu.
Compatibility
The Vision® wireless leak sensor BLK01 RF have been designed to work with the generation 03 of the Vision® system Centrale Unit:
| Type | Part No. | Description |
|---|---|---|
| BT-CT03 RF-WiFi | P08630 | WATTS Vision® Central control unit white |
| BT-CT03 RF-WiFi | P08702 | WATTS Vision® Central control unit black |
Batteries replacement
Unscrew the bottom of the product and replace both AA batteries.
Technical characteristics
Environment: Operating temperature
Shipping and storage temperature
| 0°C to 40°C
20°C to 50°C
---|---
Power supply| 2 x AA LR06 1.5V Alkaline batteries (included)
Autonomy| Life ~3 years
Operating Humidity| 0 to 100% humidity
IP Waterproof Class| IP67
Radio frequency| 868 MHz, <10mW, Bidirectional communication
Dimensions| Ø85mm – H :43mm
EU declaration of conformity Hereby, Watts Electronics declares that the
equipment is in compliance with the relevant
Community harmonization legislation
| Low voltage (LVD) – Directive 2014/35/EU Electromagnetic compatibility (EMC) – Directive 2014/30/EU
Radio equipment – Directive 2014/53/EU Restriction of the use of certain hazardous substances (RoHS) – Directive 2011/65/EU
Dimensions
Contact Information
Watts Electronics S.A.S
- B.P. N°10 – Z.A. des Tourettes, 43800 ROSIERES, France,
- T: +33(0) 471 57 40 49
- F: +33(0) 471 57 40 90,
- www.wattswater.eu
- Watts contacts in Europe: https://wattswater.eu/watts/contacts/.
© 2023 Watts.
References
- HOME
- this.info
- Home | Watts Europe
- HOME
- Home | Watts Europe
- Smart Home and Controls | WATTS EUROPE
- WATTS Companies in Europe
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>