SOUNDPEATS Air4 Pro Adaptive Hybrid Active Noise Cancelling Earbuds User Manual
- June 13, 2024
- SoundPEATS
Table of Contents
SOUNDPEATS Air4 Pro Adaptive Hybrid Active Noise Cancelling Earbuds
First Time ot Use
- Open the lid of the charging case, press and hold the button on the charging case for 3 seconds until the indicator light on the charging case flashes white. At this point, they enter into pairing mode.
- Turn on your device’s Bluetooth and select SOUNDPEATS Air4 Pro from the Bluetooth list to complete the pairing.
Multi-point Connection
SOUNDPEATS Air4 Pro earphones can be paired simultaneously with two devices.
How to connect: Once the earphones are paired with device A turn off the
Bluetooth of device A. Repeat the pairing operation to connect the earphones
to device B. When the pairing is completed, please turn on the Bluetooth of
device A to complete the pairing.
Reset
- Place both earphones back into the charging case, and make sure they are correctly placed.
- With the case lid open, press and hold the button of the charging case for l OS until the indicator light on the charging case flashes white twice.
- Close the case lid and take out the earphones, and they are activated successfully.
Wearing methods
- Identify the left and right earphones.
- Adjust the earphones to fit your ears.
Product Diagram
Controls
Power On| Auto: Open the charging case; the earphones turn on automatically
Manually: Press and hold the multifunctional button for 1.5s, with
earphones off
---|---
Power off| Auto: Place the earphones back Into the charging case and close the
case lid
Manually: Press and hold the multifunctional button for lOs. with
earphones on
Play/Pause| Double-tap on the multifunctional button
Volume-| Single tap on the left multifunctional button
Volume+| Single-tap on the rlght multifunctional button
Next Track| Press and hold the rlght multifunctional button for l . SS
Noise reduction/transparency
/normal mode switching
| Press and hold the left multifunctional button for 1.5s
Answer/Hang Up a
Phone Call
| Double-tap on the multifunctional button
Reject a Phone Call| Press and hold the multifunctional button for 1.5s
Switch Between Two
Active Calls
| Press and hold the multifunctional button for 2s
Manual Pairing| Press and hold the button of the charging case for 3s
Activate/Deactivate the
Voice Assistant
| Press the right multifunctional button three times
Activate/Deactivate the
Game Mode
| Press the left multifunctional button three times
FAQ
Ql: What does the indicator light of the charging case display?
- The battery life of the charging case:
100%-50%| Green
---|---
49%- 10%| Yellow
<10%| Red - Charging status of the charging case:
<20%| The Red light flashes slowly
---|---
20%-69%| The Yellow light flashes slowly
70%-99%| The Green light flashes slowly
100%| The Green light stays on
Q2: How to charge the charging case?
- Connect the charging case to a Type-C charger. (The current does not exceed lA).
- If the earphones stay idle for an extended period, charge them at least every three months to prevent the battery from being damaged.
Q3: Why are the earphones still connected to the phone when they are put back into the charging case and the case lid is closed?
- Check whether the charging case has battery power. If it has run out of battery, closing it will not disconnect the earphones from the device.
- Ensure the earphones are properly placed in the charging case and the charging metal sheet and PIN are clean. And wiping clean the contact points on the earphones and the charging case should fix this issue.