JVC XS-E213B Portable Bluetooth Speaker Instruction Manual

JVC XS-E213B Portable Bluetooth Speaker

Product Information

playback, volume adjustment, and track skipping. It features an LED
indicator and a USB-CTM charging port.
Specifications|

• Bluetooth Version: 5.3
• Bluetooth Profiles: A2DP1.2 / AVRCP1.4 HFP1.6 / HSP1.2
• Bluetooth Connecting Range: 10 meters
• Bluetooth Frequency: 2402 – 2480MHz
• EIRP: 6.33 dBm
• DC Input Voltage/Current: 5V/1A
• Battery Type: Lithium-ion (3.7V / 1200mAh)
• Battery Charging Time: Approximately 2.5 hours
• Battery Playback Time: 8 hours (50% Volume)
• Signal-to-Noise Ratio: > 70 dB
• Frequency Response: Not specified
• Rated Power: Not specified
• IP Code: Not specified
• Dimensions: Not specified
• Weight: Not specified

PackageContents| Portable Bluetooth speaker, Charging cable, User manual

Product Usage Instructions

Charging:

Before first-time use, fully charge the built-in battery. Use a standard 5V / 1 ~ 2A charger or connect the speaker to a PC for charging. The LED indicator will glow red during charging and turn off when the speaker is fully charged. It is important to make a complete charge every three months to avoid shortening the battery lifespan. When the battery is low, the LED indicator will flash quickly.

Power and Playback:
To turn on/off the speaker, long press the power button. In Bluetooth mode, press the power button to start/pause playback. Use the volume buttons to increase or decrease the volume. Long press the track skip buttons to skip to the next or previous track.

Note: The USB-CTM charging port mentioned in the instructions is a trademark of USB Implementers Forum.

Important Safety Information: To avoid the danger of suffocation, keep the plastic bag away from babies and children. Do not use the bag in cribs, beds, carriages, or playpens as it is not a toy.

Warrants: The user manual states that the decrease in battery capacity over time is considered usual wear and tear and not a defect of the appliance.

INTRODUCTION
Thank you for buying our product. Please read through these operating instructions, so you will know how to operate your equipment properly. After you finished reading the instructions manual, put it away in a safe place for future reference.

IMPORTANT SAFETY PRECAUTIONS

• When using your Speaker, basic safety precautions should always be followed, including the following:
• Children should be supervised to ensure that they do not play with the device.
• Keep this Speaker and its accessories away from excessive heat.
• No sharp object should be subjected to the speaker/speakerdrivers as it may damage the speakers.
• Only use a soft cloth, no harsh abrasives or chemicals to clean, as it may damage the surface finishing.
• Keep away from dripping or splashed fluids.
• Ensure the speaker is waterproof by removing all the connected cables and the cap is tightly closed before exposing the speaker to liquid.
• NEVER expose the speaker to water while charging, as doing so may result in damage to the speaker or the power source.
• NEVER operate this speaker with a damaged cable or after it has malfunctioned or has been damaged in any manner.
• NEVER leave the speaker unattended while charging. If the speaker becomes hot, smokes, or gives off an odor during charging, terminate charging immediately.

TO AVOID DANGER OF SUFFOCATION, KEEP THE PLASTIC BAG AWAY FROM BABIES AND CHILDREN. DO NOT USE THIS BAG IN CRIBS,BEDS, CARRIAGES OR PLAYPENS. THIS BAG IS NOT A TOY.

PRODUCT OVERVIEW AND CONTROL BUTTONS

1. button
   Long press to turn on/off the speaker.
   Press to start/pause playback in Bluetooth mode.

2. button
   Press to increase the volume.
   Long press to skip to the next track.

3. button
   Press to decrease the volume.
   Long press to skip to the previous track.

4. LED indicator

5. USB-CTM charging port

USB Type-CTM and USB-CTM are trademarks of USB Implementers Forum.

CHARGING

Before first-time use, fully charge the built-in battery. The charger is not included in the package, please charge the speaker via a standard 5 V / 1 ~ 2 A charger or via a PC. The LED indicator will glow red during charging. The LED indicator turns off when the speaker is fully charged.

NOTE: The LED indicator will flash quickly when the battery is low.

IMPORTANT: Please make a complete charge every three months to avoid shortening the battery lifespan.

BLUETOOTH

• Long press the button to turn on the speaker. The LED indicator will flash blue and hear a tone. The speaker is in pairing mode.
• Activate Bluetooth of mobile phone and search for device name “XS-E213B” / “XS-E213G” then connect it. If the pairing is successful, the LED indicator will be solid blue.
  NOTE: The speaker will automatically shut down after 10 minutes in pairing mode if no devices are paired. When the volume reaches the maximum level, you will hear a “Beep” voice prompt.

Disconnecting the paired mobile phone

• Press the button three times to disconnect the current device.
  The LED indicator will flash blue and the speaker will be in pairing mode.

HANDS-FREE FUNCTION

When phone or other smartphone is connected to your speaker, follow the steps below to take calls hands-free.

• Press the button to pick up the call.
• Press the button twice to reject the call.
• During a call, press the button to hang up the call.

TWS (TRUE WIRELESS STEREO)
The TWS technology enables you to use two speakers pairing via Bluetooth to create a wireless dual-channel system to deliver true stereo sound effect.

• Turn on both speakers. Make sure both speakers are without any Bluetooth connection.
• Double press the button on one of the speakers, the second speaker will connect automatically.
• The first speaker LED indicator flashes blue and the LED indicator of the second one keeps solid blue, which means both speakers are connected successfully.
• Pair your mobile phone with the first speaker, the LED indicator of both speakers will be solid blue.

Disconnect the TWS connection
Double press the button on one of the speakers to disconnect the TWS pairing.

SPECIFICATION

• BT Version 5.3

• BT profiles A2DP1.2 / AVRCP1.4
  HFP1.6 / HSP1.2

• BT connecting range 10 meters

• BT Frequency 2402 – 2480 MHz

• EIRP 6,33 dBm

• DC input voltage/current 5V / 1A

• Battery type Lithium-ion (3,7V / 1200mAh)

• Battery Charging Time approx. 2,5 hours

• Battery Playback Time 8 hours (50 % Volume)

• Signal-to-noise ratio > 70 dB

• Frequency response 70 Hz – 18 kHz

• Rated Power 8 W (RMS)

• IP code IPX6

• Dimensions 75 x 74 x 111 mm

• Weight 265 ± 10 g

Package Contents: Portable Bluetooth speaker, Charging cable,User manual
We reserve the right to change technical specifications.

WARRANTY

The capacity of the product battery decreases over time.
Decreasing of battery capacity occurs during normal use of the appliance and is considered usual wear and tear of the appliance. Decreasing battery capacity is not a defect of the appliance.

Disposal of old Electrical & Electronic Equipment (Applicable in the European Union and other European countries with separate collection systems) This symbol on the product or on its packaging indicates that this product shall not be treated as household waste. Instead it shall be handed over to the applicable collection point for the recycling of electrical and electronic equipment. By ensuring this product is disposed of correctly, you will help prevent potential negative consequences for the environment and human health, which could otherwise be caused by inappropriate waste handling of this product. The recycling of materials will help to conserve natural resources. For more detailed information about recycling of this product, please contact your local Civic Office, your household waste disposal service or the shop where you purchased the product.
Hereby, ETA a.s. declares that the radio equipment type XS-E213B / XS-E213G is in compliance with Directive 2014/53/EU. The full text of the EU declaration of conformity is available at the following internet address: www.JVCAUDIO.cz/doc
The Bluetooth® word mark and logo are registered trademark owned by Bluetooth SIG, Inc. and any use of such marks Shenzhen Trendwoo Tech. Co.,Ltd., is under license. Other trademarks and trade names are those of their respective owners.

This product is manufactured and distributed exclusively by ETA a.s., serviced and warranted by its designated partner. “JVC” is the trademark of JVCKENWOOD Corporation, used by such company under license.

References

• Ltd | Registrera Engelskt Ltd bolag med SUF
• Declaration of Conformity | | jvcaudio.cz

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>