OPPSK 120W RGBW Stage Strobe Light User Manual

Stage Strohe Light
USER MANUALhyt-amz-sale@outlook.com

WARNING
FOR YOUR OWN SAFETY, PLEASE READ THIS USER MANUAL CAREFULLY BEFORE YOUR INITIAL START-UP!
CAUTION: Keep this equipment away from rain, moisture and liquids.

SAFETY INSTRUCTIONS

Every person involved with the installation, operation & maintenance of this equipment should:

• Be competent
• Follow the instructions of this manual

CAUTION: Take care using this equipment! high voltage risk of electric shock!!

Before your initial start-up, please make sure that there is no damage caused during transportation. Should there be any, consult the seller and do not use the equipment.
To maintain the equipment in good working condition and to ensure safe operation, it is necessary for the user to follow the safety instructions and warning notes written in this manual.
Please note that damages caused by user modifications to this equipment are not subject to warranty.
Digital display operate:

a). lllustration part:

A.MENU
B.UP
C.DOWN
D.ENTER

Operation Instructions:
After startign press A(MENU) Enter into main-menu,
Press B(UP) C(DOWN) to select the submenu, and then press D(ENTER) to ensure.

ATTENTION:
DANGER OF LIFE! RISK OF BURNS!
RISK OF FIRE! RISK OF SHORT CIRCUIT!

DMX Signal Connection

3-Pin XLR to 5-Pin XLR Conversion

Technical Specifications:

Voltage:AC110-240V,50/60HZ
Power: 120W
LED:256PCS 5050 RGB LED, 128PCS 5730 White LED
DMX Channel:6/9/64/112CH

SETTING MENU LED DISPLAY:

plugged into the console, automatically enter DMX mode
9CH| A001-A504
64CH| A001-A449
112CH| A001-A401
Show| Shou| Sh 1-12| Program Show 1-12
Sp 1-10| Program Speed 1-10(slow-fast)
St 0-9| Program Flash 0-9(slow-fast)
Sound Mode| Soud| Sen 1-9| Sound Sensitivity 1-9
Slave| SLAV| Slave| Slave (Slave, automatically identify the master)
Edit color| Colo| r000-255| Red (0-100%) Red Dimming
g000-255| Green (0-100%) Green Dimming
b000-255| Blue (0-100%) Blue Dimming
U000-255| White (0-100%) White Dimming
St 0-9| LED Strobe(slow-fast)
Static colors| StAt| CL01-CL37| Static Color
St 0-9| LED Strobe(slow-fast)
Product Set| Set| dis| 10s| Blacklight shutoff time ,from 10s to always on
20s
30s
60s
on
tenp| 50-6 ,
5 C| Protecting temperature settings,protection within the range of 50-65-C,exceeding this range began to reduce output power
Send| yes| Send one-click settings, and the channel mode of all lamps is the channel mode of the current master
Information| Info| ver| Vxxx| Current software version
tenp| XX C| The current light plate temperature (degrees Celsius), if the temperature detection line fails, the boot prompt-RT-, the menu display EROR

DMX MODE 1:6 CH

DMX MODE 2:9 CH

Effect
Channel
7-13| Pattern Effect 1 (CH2-CH4 control the pattern color)
14-20| Pattern Effect 2 (CH2-CH4 control the pattern color)
|
237-244| Pattern Effect 35 (CH2-CH4 control the pattern color)
245-251| Auto Effect (Circle running pattern effect 1-35, CH2-CH4 control the pattern color)
252-255| Sound Active Mode (CH8 is invalid)
CH8| 0-6| CH5 No Function| 5730-W
Effect
Channel
---|---|---|---
7-13| Effect 1
14-20| Effect 2
NN | NN•
224-230| Effect 32
231-255| Auto Effect (Circle running pattern effect 1-32)
CH9| 0-255| DMX Program Speed(Slow-fast)|

DMX MODE 3:64CH
Control zones for DMX control (64CH)

RGB
1| RGB
2| RGB
3| RGB
4| RGB
5| RGB
6| RGB
7| RGB
8| RGB
9| RGB
10| RGB
11| RGB
12| RGB
13| RGB
14| RGB
15| RGB
16
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---
W1| W2| W3| W4| W5| W6| W7| W8| W9| W10| W11| W12| W13| W14| W15| W16
RGB
1| RGB
2| RGB
3| RGB
4| RGB
5| RGB
6| RGB
7| RGB
8| RGB
9| RGB
10| RGB
11| RGB
12| RGB
13| RGB
14| RGB
15| RGB
16

DMX MODE 4:112CH
Control zones for DMX control (112CH)

RGB
1| RGB
2| RGB
3| RGB
4| RGB
5| RGB
6| RGB
7| RGB
8| RGB
9| RGB
10| RGB
11| RGB
12| RGB
13| RGB
14| RGB
15| RGB
16
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---
W1| W2| W3| W4| W5| W6| W7| W8| W9| W10| W11| W12| W13| W14| W15| W16
RGB
17| RGB
18| RGB
19| RGB
20| RGB
21| RGB
22| RGB
23| RGB
24| RGB
25| RGB
26| RGB
27| RGB
28| RGB
29| RGB
30| RGB
31| RGB
32

Orientation:

The Strobe Light may be mounted in any position; however, make sure adequate ventilation is provided around the product.

MAINTENANCE

Dust build-up reduces light output performance and can cause overheating. This can lead to reduction of the light source’s life and/or mechanical wear. To maintain  optimum performance and minimize wear, clean your lighting products at least twice a month. However, be aware that usage and environmental conditions could be contributing factors to increase the cleaning frequency.
To clean the product, follow the instructions below:

1. Unplug the product from power.
2. Wait until the product is at room temperature.
3. Use avacuum (or dry compressed air) and a soft brush to remove dust collected on the external surface/vents.
4. Clean all transparent surfaces with a mild soap solution, ammonia-free glass cleaner, or isopropyl alcohol.
5. Apply the solution directly to a soft, lint free cotton cloth or a lens cleaning tissue.
6. Softly drag any dirt or grime to the outside of the transparent surface.
7. Gently polish the transparent surfaces until they are free of haze and lint.

** Always dry the transparent surfaces carefully after cleaning them.
CAUTION:** Take care using this equipment! high voltage-risk of electric shock!!

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>