OPPSK HYT Rechargeable Par Light User Manual

OPPSK HYT Rechargeable Par Light

Product Information

Specifications:

• Product Name: Rechargeable Par Light
• Included in the Box:
  • 1 x Rechargeable Par Light
  • 1 x Adapter
  • 1 x IR Remote Controller
  • 1 x User Manual
• Dimensions: 6.7in x 4.9in
• Battery Life Indicator: Yes
• Digital Display: Yes
• Power ON/OFF: Yes
• Power IN: Yes
• DMX IN: Yes
• DMX OUT: Yes

Product Usage Instructions

Before You Begin

Unpacking Instructions:
Carefully unpack the product immediately and check the container to make sure all the parts are in the package and are in good condition.

Claims:
If the box or the contents (products and accessories) appear damaged from shipping or show signs of mishandling, notify the carrier immediately, contact Amazon customer support, and request them for a new replacement. Amazon customer support team will help you with this.

If no response from Amazon, you can contact seller customer service directly at [email protected].

Safety Notes:

• Always connect the product to a grounded circuit to avoid the risk of electrocution.
• Always disconnect the product from the power source before cleaning or replacing the fuse.
• Avoid direct eye exposure to the light source while the product is on.
• Make sure the power cord is not crimped or damaged.
• Never disconnect the product from the power cord by pulling or tugging on the cord.
• If mounting the product overhead, always secure it to a fastening device using a safety cable.
• Make sure there are no flammable materials close to the product when operating.
• Do not touch the product’s housing when operating because it may be very hot.
• Always make sure that the voltage of the outlet to which you’re connecting the product is within the range stated on the decal or rear panel of the product.
• The product is for indoor use only! (IP20) To prevent the risk of fire or shock, do not expose the product to rain or moisture.
• Always install the product in a location with adequate ventilation, at least 20in / 50cm from adjacent surfaces.
• Be sure that no ventilation slots on the product’s housing are blocked.
• Never carry the product from the power cord.

FAQ

• Q1: Can I use this product outdoors?
  No, this product is for indoor use only (IP20). It should not be exposed to rain or moisture to prevent the risk of fire or shock.

• Q2: How can I contact Amazon customer support?
  You can contact Amazon customer support through their website at https://www.amazon.com/gp/help/customer/contact-us. If your order is urgent, you can also reach them through the following phone numbers: U.S. and Canada: 1-866-216-1072.

• Q3: What should I do if the product appears damaged during shipping?
  If the box or the contents of the product appear damaged from shipping or show signs of mishandling, notify the carrier immediately and contact Amazon customer support for a new replacement.

Before You Begin

What In the Box

• 1 x Rechargeable Par Light
• 1 x Adapter
• 1 x IR Remot e C ontroller
• 1 x User Manual

Unpacking Instructions:
Carefully unpack the product immediately and check the container to make sure all the parts are in the package and are in good condition.

Claims:
If the box or the contents (products and accessories ) appear damaged from shipping or show signs of mishandling, notify the carrier immediately, contact Amazon customer support, and request for a new replacement.

• Amazon customer support team will help you with this.
• You may contact the Amazon customer support team at the below link: https://www.amazon.com/gp/help/customer/contact-us
• If your order is urgent, here are Amazon customer service phone numbers as we ll:
• U.S. and Canada: 1-866-216-1072
• If no response from Amazon, you can contact seller customer service directly: [email protected]

Disclaimer:
We believe that the information contained in this manual is accurate in all respects. However, we assume no responsibility and specifically disclaim any liability to any party for any loss, damage, or disruption caused by any errors or omissions in this document, whether such errors or omissions result from negligence, accident, or any other cause. we reserve the right to revise the content of this document without any obligation to notify any person or company of such revision, however, we have no obligation to make and do not commit to make any such revisions.

Safety Notes

Please read the following Safety Notes carefully before working with the product. The Notes include important safety information about installation, usage and maintenance.

• Always connect the product to a grounded circuit to avoid the risk of electrocution.
• Always disconnect the product from the power source before cleaning or replacing the fuse.
• Avoid direct eye exposure to the light source while the product is on.
• Make sure the power cord is not crimped or damaged .
• Never disconnect the product from the power cord by pulling or tugging on the cord.
• If mounting the product overhead, always secure it to a fastening device using a safety cable.
• Make sure there are no flammable materials close to the product when operating.
• Do not touch the product’s housing when operating because it may be very hot.
• Always make sure that the voltage of the outlet to which you’re connecting the product is within the range stated on the decal or rear panel of the product.
• The product is for indoor use only! (IP20) To prevent the risk of fire or shock, do not expose the product to rain or moisture.
• Always install the product in a location with adequate ventilation, at least 20in / 50cm from adjacent surfaces.
• Be sure that no ventilation slots on the product’s housing are blocked.
• Never carry the product from the power cord or any moving part. Always use the hanging/mounting bracket.
• The Max ambient temperature (Ta) is 104°F / 40°C. Do not operate the product at a higher temperature.
• In the event of a serious operating problem, stop using the product immediately.
• Never try to repair the product. Repairs carried out by unskilled people can lead to damage or malfunction. Please contact the seller’s customer service.
• To eliminate unnecessary wear and improve its lifespan, during periods of non-use completely disconnect the product from power via a breaker or by unplugging it.
• Keep this user manual for future use. If you sell the product to someone else, be sure that they also receive this document.

Introduction

Product Overview & Size

Setup

AC Power:
The Rechargeable Par Light has an auto-ranging power supply and it can work with an input voltage range of 100 to 240 VAC, 50/60 Hz. To determine the product’s power requirements (circuit breaker, power outlet, and wiring), use the current value listed on the label affixed to the product’s back panel, or refer to the product’s specifications chart. The listed current rating indicates the product’s average current draw under normal conditions.

Mounting:
Before mounting the product, read and follow the safety recommendations indicated in t he Safety Notes.

Orientation:
The Rechargeable Par Light may be mounted in any position; however, make sure adequate ventilation is provided around the product.

Operation

Control Panel Operation

To access the control panel functions, use the four buttons located underneath the display.

out of the current menu option