qtx MoonCloud-400 Compact LED Fog Machine User Manual
- June 13, 2024
- qtx
Table of Contents
qtx MoonCloud-400 Compact LED Fog Machine
Product Informationt
The MoonCloud-400 is a compact LED fog machine designed to create a mesmerizing fog effect with an added RGB moonflower effect. It is a versatile and powerful fog machine that can enhance the atmosphere of any event or performance. The product is manufactured by AVSL Group and comes with a user manual for properoperation.
Product Specifications
- Power supply: 220-240Vac, 50/60Hz (IEC)
- Power consumption: 400W
- Fuse rating: F5A
- Warm-up time: 3-5 minutes
- Remote control frequency: 433Mhz
- Fog output (approx.): 2500 cu.ft per minute
- Fluid capacity: 0.3 litre
- LED power: 1W RGB LED x 9pcs + 2W RGB moonflower LED
- Battery remote: 23A 12V (not supplied)
- Dimensions: 290 x 250 x 155mm
- Weight: 3kg
INTRODUCTION
Caution : Please read this manual carefully before operating Damage caused by misuse is not covered by the warranty
A compact and portable unit comprising a standard fog machine and 2 eye- popping light effects. The 400W fogger generates around 2500cu.ft/min, ample fog to easily fill smaller rooms and venues. The 9 bright RGB LEDs provide a traditional PAR wash effect and the additional central RGB moonflower then adds colourful patterns which both combine with the fog to provide a complete room filling solution. Control using either the in-built sound to light mode or with the included RF remote, this all-in-one solution is ideal for mobile DJs, house parties, small events and more.
- Compact, portable unit comprising standard fog machine and 2 eye-popping light effects.
- 400W fog vaporizer with around 2500cu.ft/min output.
- Nine 1W LEDs and a 2W moonflower LED add a bright colourful light show to the smoke effect.
- Control using sound to light or with the included RF remote.
- Supplied with UK and EU IEC leads and mounting bracket.
In the box
Please check the contents to ensure that the product has been received in good
condition.
- MoonCloud-400 Fog Machine
- RF wireless remote
- UK/EU Mains Leads
- User guide
If you find any accessory is missing or the machine has arrived with damage, please contact your local dealer at once. Do not try to fix this item yourself or you will invalidate the warranty. Please keep the original packaging and invoice for any possible replacement or return demands.
Warnings
- To prevent risk of fire or electric shock, do not expose electrical parts to water or moisture.
- If liquids are spilled on areas other than inside the fluid tanks, disconnect the mains, allow the unit to dry out and have it checked by qualified personnel before use.
- Avoid any impact, dropping or extreme pressure to the housing.
- No user serviceable parts inside – do not open the case.
- Allow the unit to acclimatize to room temperature before operating.
- The MoonCloud-400 has a built-in fluid container so should be operated in an upright position.
- Ensure that the unit is positioned on a stable, non-slip surface.
Recommended Fluids
For optimal performance, it is strongly recommended to use the following fluids specifically formulated for heater-based fog machines
| QTX ref code | Description | Size |
|---|---|---|
| 160.643UK | Standard fog fluid yellow | 1 Litre |
| 160.582UK | Standard fog fluid yellow | 5 Litre |
Setting Up
- Unpack the MoonCloud-400 unit.
- Unscrew the top cap of the tank and remove to fill with fog fluid.
- Replace the bottle and screw the cap securely, making sure that the pipe is fed down to the bottom of the bottle to ensure a consistent flow of fluid.
- Connect the IEC mains plug and power the unit on.
- The unit will begin the warming up process which normally takes around 3-5 minutes.
- Once the unit is ready to fog, the red Remote ready LED will illuminate on the rear of the unit.
Rear Panel
Operation
RF Remote Control
The unit’s default LED setting is sound to light which will be enabled unless
the RF remote is used to control the specific LED functions. See below for
details of control functions using the included RF remote
- Continuous fog start/stop
- Auto LED Mode slow/fast
- LED sound to light mode (default)
- LED individual modes select
Specifications
| Power supply | 220-240Vac, 50/60Hz (IEC) |
|---|---|
| Power consumption | 400W |
| Fuse rating | F5A |
| Warm up time | 3-5 minutes |
| Remote control frequency | 433Mhz |
| Fog output (approx.) | 2500 cu.ft per minute |
| Fluid capacity | 0.3 litre |
| LED power | 1W RGB LED x 9pcs + 2W RGB moonflower LED |
| Battery remote | 23A 12V (not supplied) |
| Dimensions | 290 x 250 x 155mm |
| Weight | 3kg |
Troubleshooting
No power to main unit| Check mains voltage is correct and socket is
switched on
---|---
Check IEC lead is OK and connected properly
Check mains fuse in IEC connector and fuse in plug top
If fuse blows repeatedly, refer to qualified service personnel
Power to unit but no| Check fluid level in tank
fog output in manual| If fluid is OK and pump working, the lines may be
blocked
| Check that output is not switched off on the key fob remote
| If blocked, clean with fog machine cleaner & distilled water
LED lights not working| Ensure lights are not switched off on the key
fob remote
If in sound to light mode, ensure audio is loud enough to be received by the
unit
This product is classed as Electrical or Electronic equipment and should not be disposed with other household or commercial waste at the end of its useful life. The goods must be disposed of according to your local council guidelines.
Errors and omissions excepted.
Copyright© 2023 AVSL Group Ltd, Unit 2 Bridgewater Park, Taylor Road, Trafford
Park, Manchester. M41 7JQ.
www.avsl.com
AVSL (Europe) Ltd, Unit 3D North Point House,
North Point Bus. Park, New Mallow Road, Cork, Ireland.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>