ifi PowerStation Instructions
- June 7, 2024
- ifi
Table of Contents
ifi PowerStation Instructions
1. Power ON/OFF
2. Power inlet IEC
Connect to the wall outlet .
Tips:
- You can insert your existing AC I Purifiers into the PowerStation to enhance your system.
- The more AC I Purifiers used, the cleaner the overall power.
- On the PowerStation, if an AC I Purifier is placed in the middle, this AC I Purifier will also act as a extra noise shield. Any noise is reduced, isolated and confined to the respective left/right sections of the AC I Purifier.
3. Polarity/Earth detection
The following table depicts the different readings and the respective LED
color combinations. Where needed, make the necessary system adjustments.
4. Ground/Earth connection
The 4mm banana socket fitted to the PowerStation can be used to create a
supplementary ground/earth connection for audio systems where there is no
ground/earth present.
The supplementary ground/earth connection is `smart’ as it will NOT introduce a ground loop EVEN if the system is already earthed (as more than one earth also creates a ground loop).
5. Over-voltage Surge Protection
In the rare instance of excessive Over-voltage OR a short in the mains
electricity, the Over-voltage Surge Protection (OSP) is an auto detection and
cut-off circuit.
It will take several minutes for the PowerStation to reboot BUT if the Over-
voltage or short persists, then the PowerStation will NOT power on, thereby
protecting the downstream audio system from harm. If this occurs, please have
a qualified electrician inspect your mains.
Disclaimer: Although the PowerStation does its utmost to protect the audio
system from electric harm, AMR/iFi does not guarantee this.
Features
- Active Noise Cancellation2 technology
- Solid PurCopper™ Bus-Bars for power transfer
- Individual noise isolation chambers – for each outlet
- High-performance PurCopper™ outlets
- Heavy OFHC Continuous Cast Copper internal wiring
- Polarity and earth diagnostic system
- Advanced surge & transient protection system
- Dedicated chassis grounding system
- 2500W-10A MAX 250~
Specifications
Noise reduction: > 40dB (> 100x)
Surge Protection: max. 30,000A @ 1,000V/10uS
Operating Voltage: 90V – 265V
Dimensions: 478(l) x96 (w) x76 (h) mm
Weight: 1.98kg (4.37 Ibs)
Warranty period: 12 months
Specifications are subject to change without notice.
CAUTION: RISK OF ELECTRIC SHOCK DO NOT PLUG INTO ANOTHER RELOCATABLE POWER TAP. TO REDUCE THE RISK OF ELECTRIC SHOCK, USE ONLY INDOORS AND IN DRY LOCATIONS.
DO NOT INSTALL THIS DEVICE IF THERE IS NOT AT LEAST 10 METERS OR WIRE BETWEEN THE ELECTRICAL OUTLET AND THE ELECTRICAL SERVICE PANEL.
NO FOR USE WITH AQUARIUMS AND ALL OTHER WATER-RELATED PRODUCTS.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>