Tasmota L1T Wi-Fi Smart Light Switch Instruction Manual
- June 13, 2024
- Tasmota
Table of Contents
Tasmota L1T Wi-Fi Smart Light Switch
Product Information
Tasmota is a non-commercial product that offers limited support.
Users are expected to be willing to research and troubleshoot potential issues
independently. Detailed information on connecting, changing settings, and
modifications can be found on the Tasmota
website.
The product is a power strip with smart capabilities that can be integrated into various smart home systems such as Alexa, AWS IoT, Domoticz, Home Assistant, and more.
Product Usage Instructions
Installation
- Separate the upper and tower parts of the switch using a screwdriver.
- Ensure a neutral wire is available for installation.
- Prepare the wiring:
- Live Wire connects to the L terminal.
- Bulb Wire connects to the L1 or L2 terminal.
- Neutral Wire connects to the N terminal.
- Mount the switch on the wall.
Connecting and Setting Up
- Plug in the device.
- Search for an open Wi-Fi hotspot with “Tasmota” in the network name.
- Connect to the Wi-Fi hotspot and open a browser.
- Go to the address “192.168.4.1”.
- Enter your Wi-Fi network name and password.
- Once network data is confirmed, the power strip will display its IP address. Make note of it.
- The browser will automatically redirect to the power strip’s IP address after saving the network data.
- The power strip is now ready to use. The template and rules are already activated.
Resetting the Device
If the power button is present:
- Hold the power button for 40+ seconds until the light blinks and the device restarts.
If there is no power button:
- Unplug the device and plug it in and out 6 times. On the 7th time, leave it plugged in. The LED should start blinking, indicating that the socket is ready to be connected again.
If you have access to the web interface:
- Type “reset 1” in the console and press enter.
Note: Please refer to the Tasmota website for further assistance with template parameters and integration with various smart home systems.
INSTRUCTION MANUAL
Tasmota is not a commercial product and support is limited. You have to be
willing to research and solve potential problems yourself.
Detailed information about connecting, changing settings and modifications is
shown on the website “https://tasmota.github.io/docs/”
How to connect and use
Separate the upper and tower parts from the switch by screwdriver
Attention: Neutral wire is required.
Prepare to install wiring
- Live Wire connects “L” terminal
- Bulb Wire connects “L1, L2” terminal
- Neutral Wire connects “N” terminal
1 gang connects “L1″Terminal
2 gang connects “L1, L2” terminal
Fitting switch on the wall
How to connect
- Plug in the device
- Find open wifi hotspot with Tasmota word in name
- Connect to it and go to 192.168.4.1 address in browser
- Enter your wifi network name and password
- After confirming network data, power strip will show you IP address that it will be available from, copy it, just in case.
- It will automatically redirect you to this address after you network data is filled and saved.
- Power strip is ready to use. Template and rules already activated, but in case you will need it later – you can find it below
Template Parameters:
{“NAME”:”NOUS
L1T”,”GPIO”:[544,0,1,32,0,0,0,0,0,224,288,0,0,0],”FLAG”:0,”BASE”:1}
if there is power button:
Hold the power button 40+ seconds, untill light blinks and device restarts if
there is no power button:
Plug the device in and out 6 times and leave plugged in on the 7th – LED
should start to blink, that means socket is ready to be connected again if
have access to the web interface:
type reset 1 in console and press enter
Smart Home Intergations
Tasmota is Incredibly expandable and flexible and can be integrated with:
Alexa, AWS IoT, Domoticz, Home Assistant, Homebridge, HomeSeer, IP Symcon,
KNX, NodeRed,nymea, OctoPrint, openHAB, Otto, IOBroker, Mozilla WebThings
Adapter, SmartThings, Tasmohab,Homematic ip, etc.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>