PRINCESS 249415 Espresso Machine Instruction Manual

June 9, 2024
Princess

249415 Espresso Machine

Espresso Machine
01.249415.01.001

PARTS DESCRIPTION

PARTS DESCRIPTION

1. Cup warming tray

|

10. Steam control knob

---|---

2. Tank lid

|

11. Cup stand

3. Water tank

|

12. Drip tray

4. On/off knob

|

13. Filter holder I

5. Thermometer

|

14. Filter for 2 cup dose

6. Coffee function knob

|

15. Filter for 1 cup dose
15.1 E.S.E pod / filter

7. Steam function knob

|

16. Filter holder II

8. Indication lights

|

17. Filter for 1 capsule

9. Steam/hot water nozzle

|

18. Measuring spoon with tamper

SAFETY

  • By ignoring the safety instructions the
    manufacturer cannot be held responsible for
    the damage.

  • If the supply cord is damaged, it must be
    replaced by the manufacturer, its service
    agent or similarly qualified persons in order to
    avoid a hazard.

  • Never move the appliance by pulling the cord
    and make sure the cord cannot become
    entangled.

  • The appliance must be placed on a stable,
    level surface.

  • The user must not leave the appliance
    unattended while it is connected to the supply.

  • This appliance is only to be used for
    household purposes and only for the purpose
    it is made for.

  • This appliance shall not be used by children
    aged less than 8 years. This appliance can be
    used by children aged from 8 years and above
    and persons with reduced physical, sensory or
    mental capabilities or lack of experience and
    knowledge if they have been given
    supervision or instruction concerning use of
    the appliance in a safe way and understand
    the hazards involved. Children shall not play
    with the appliance. Keep the appliance and its
    cord out of reach of children aged less than 8
    years. Cleaning and user maintenance shall
    not be made by children unless older than 8
    and supervised.

  • To protect yourself against an electric shock,
    do not immerse the cord, plug or appliance in
    the water or any other liquid.

  • This appliance is intended to be used in
    household and similar applications such as:
    – Staff kitchen areas in shops, offices and other working
    environments.
    – By clients in hotels, motels and other residential type
    environments.
    – Bed and breakfast type environments.
    – Farm houses.

  • Children shall not play with the appliance.

  • This appliance shall not be used by children.
    Keep the appliance and its cord out of reach
    of children.

IN NEED OF ACCESSORIES? VISIT
WWW.PRINCESSHOME.EU/NL!NL/CUSTOMERSERVICE/ACCESSORIES!SPAREPARTS
FOR ACCESSORIES AND SPARE PARTS TO EXTEND YOUR ITEM!

© Princess 2023 | Swaardvenstraat 65
5048 AV Tilburg | The Netherlands | www.princesshome.eu

This product complies with conformity requirements of the
applicable European regulations or directives.
The Eurasian Conformity mark (ЕАС) is a certification mark to
indicate products that conform to all technical regulations of the
Eurasian Customs Union.
This symbol is used for marking materials intended to come into
contact with food in the European Union as defined in regulation (EC)
No 1935/2004.

Duales System Deutschland GmbH and is protected as a trademark
worldwide. The logo may only be used by customers of DSD GmbH
holding a valid trademark usage contract or by engaged waste
management companies within the Federal Republic of Germany. This
also applies to reproduction of the logo by third parties in a dictionary,
an encyclopaedia or an electronic database containing a reference
manual.
The universal recycling symbol, logo, or icon is an internationally
recognized symbol used to designate recyclable materials. The
recycling symbol is in the public domain and is not a trademark.
Waste electrical products should not be disposed of with
household waste. Please recycle where facilities exist. Check with your
local Authority or local store for recycling advice.
Separate collection / Check your local municipal guidelines.
The product and packaging materials are recyclable, subject to
extended manufacturer responsibility. Dispose it separately, following
the illustrated packaging symbols, for better waste treatment. The
Triman logo is valid in France only.

Cleaning and maintenance

  • Never immerse the cord, plug, or appliance
    itself in water or other liquids.

  • Always unplug the machine and make sure
    cool down before you clean it.

  • All the non-electrical parts can be washed in
    warm soapy water. Dry thoroughly before
    reusing. These parts are not dishwasher safe.
    Never use abrasive detergents.
    Steam/hot water nozzle

  • Pull out the rubber tube downwards, then
    wash thoroughly. Check that the hole in the
    nozzle is not blocked, if necessary unblock
    them with a pin.
    Boiler outlet
    At least twice a year carry out the following procedure:
    • Wipe away any coffee grounds from the outlet
    area.
    • Clean the boiler area with a damp cloth.
    • Clean the removed outlet thoroughly in hot
    soapy water using a brush , rinse thoroughly,
    make sure the holes are not blocked, and if
    necessary use a pin to clean.
    Descaling
    • The appliance has to be descaled every month,
    otherwise the coffee taste will become bad and
    the scale deposited inside in the machine may
    cause permanent and irreparable damage to
    the machine.
    Note: Please use a citrus descaler to descale the Nespresso maker.
    Note: In case of using solid descaler, make sure the descaler dissolves
    into cold water fully before pouring into the water tank. Never use a
    descaler based on mineral acids such as sulphuric acid, hydrochloric acid,
    sulphuric acid and acetic acid(e.g. vinegar). These descalers may damage
    your machine.

  • Mix adequate descaler with cold water in a
    measuring jug as per its instructions. Fill the
    water tank up to the Max level with the prepared
    descaling solution. Then put the water tank
    back into the machine.

  • Make sure the filter holder is not attached and
    put a bowl with a capacity of at least 1500ml
    under the boiler outlet to collect the descaling
    solution.

  • Press down the On/Off knob and wait until the
    light stops blinking.

  • Press down the coffee function knob and allow
    half the solution to flow out, seriatim press the
    coffee function and the On/Off button to the off
    position to stop the flow.

  • Leave the machine to rest for 15 minutes, then
    press the On/Off knob and coffee function
    button until the water tank is empty, then rinse it
    thoroughly.

  • Fill the water tank with cold fresh water up to
    the Max level again and repeat steps 2 to 5
    without rest to rinse the appliance for twice.
    Note: Always rinse the machine by letting it empty at least two full water
    tanks.

BEFORE THE FIRST USE

  • Take the appliance and accessories out the box. Remove the
    stickers, protective foil or plastic from the device.

  • Place the device on a flat stable surface and ensure a minimum of 10
    cm. free space around the device. This device is not suitable for
    installation in a cabinet or for outside use.

  • Flush the machine through with clean water in the following steps:
    – Make sure the all buttons are in the off position and that the
    steam water knob is closed by turning clockwise.
    – Lift out the tank, draw up the lid and fill with cold water up to the
    MAX level marked. Alternatively draw up the lid and fill the tank
    whilst in position on the espresso machine. We recommend
    using filtered water as it produces better coffee and reduces
    limescale, never use fizzy water.
    – Refit the tank, make sure that it is correctly located and apply
    light pressure if necessary to ensure the valve at the bottom of
    the tank connects with the water inlet of the machine. It is
    normal for water to remain in the compartment under the tank,
    this can be done using a sponge.
    – Attach the filter holder to the machine by positioning it under the
    boiler outlet and turning to the right, Respectively place suitable
    container underneath the boiler outlet and the steam/hot water
    nozzle.
    – Plug in the mains supply, Press down the On/Off knob then the
    power light will be illuminated, the coffee light will blink until it
    reaches the right temperature, then press the coffee function
    knob, the machine will be flushed, Press the coffee function
    knob after a while to turn off manually.
    – Press down the steam function knob, the steam function light
    will blink, when the light stops blinking turn the steam control
    knob and the steam nozzle will be flushed. Press the steam
    function knob again to stop the machine.
    Important: You can not brew espresso if you have not flushed the
    machine at first, the flushing cycle causes the boiler to fill with water. If you
    have not used the machine for a few days, you have to flush it with fresh
    water before you use it again.

USE

Preheating the espresso machine

  • To ensure your espresso coffee is brewed at the right temperature it is
    essential that the coffee appliance is preheated.
    – Check that the steam control knob is firmly closed (turn
    clockwise) and that there is water in the tank.
    – Put a jug under the steam nozzle.
    – Fit the desired filter into the filter holder (without coffee) and
    attach to the machine by positioning it under the boiler outlet
    and turning to the right, ensure is it firmly located.
    – Position two cups under the filter holder, if you use the same
    cup that the coffee will be served in it will be preheated.
    Alternatively the cups can be preheated on the cups warming
    tray.
    – Press the On/Off knob and wait until the light stops blinking.
    – Press down the coffee function knob and wait until two cups of
    water runs into the bowl.
    – Press the steam function knob and wait until the light stops
    blinking.
    – Turn the steam control knob anti-clockwise and allow a little
    amount of water to run into the jug.

Making espresso

  • Preheat the appliance as above ‘Preheating the espresso machine’.

  • To make one or two cups of espresso: use filter holder I. Use the smaller
    filter for making one cup and the larger filter for two cups.

  • Add the coffee using the measuring spoon provided one full spoon per
    cup, level the surface then lightly press with the tamper of the measuring
    spoon, wipe off any coffee around the rim. When buying ground coffee
    sure it is suitable for espresso machines. Never press the coffee too
    firmly as the coffee will come out slowly and the cream will be of a dark
    color, however, if it is pressed too lightly, the coffee will come out too fast
    and the cream will be a light color.

  • To use a coffee capsule: use filter holder II. Open the bottom of the
    capsule filter, place a coffee capsule in it, cover and press tightly. It is
    also possible to use a Nespresso®* capsule.

  • Attach the filter holder into the boiler outlet, turn it to the right to lock into
    position. Put one or two cups underneath, if making one cup of coffee,
    center your cup in the middle. Ensure the on/off knob is pressed down
    then the power light will blink, wait until the light stops blinking then press
    down the coffee function knob to make espresso.

  • When you’ve enough coffee, not too much otherwise it will be too weak
    (optimum dosage is 30ml per cup) press the coffee function knob again.
    If you are not making any more coffee, press the on/off button again to
    turn of the appliance.

  • Remove the filter holder by turning to the left. There will be water on the
    filter when you remove it, this is normal.

  • To remove the used coffee from the filter holder, please lift the plastic
    pressing block to press the edge of filter, then tip the filter holder upside
    down and tap out the grounds.
    Important: You can not start to make espresso until the ready light stops
    blinking because it means the water temperature is not high enough when
    the ready light is stil blinking.
    Important: To avoid water leakages from the rim of the filter holder and to
    ensure optimum performance, it is necessary to clear any ground coffee
    from around the boiler outlet. Take care as the area may be hot.
    Note: * Brand of a third party that is not affiliated with Princess.
    Frothing milk for cappuccino

  • Prepare the espresso as previously described.

  • Make sure there is water in the tank.

  • Press the on/off knob for steam, the steam light will blink, wait until the
    light stops blinking, this indicates that the boiler has reached the correct
    temperature.

  • Partly fill a jug with milk – the milk may increase up to three times in
    volume so select a suitably sized jug. Cold semi skimmed milk gives the
    best results.

  • Position the jug under the steam nozzle.

  • Place the nozzle into the milk about 30mm deep and turn the steam
    control knob in an anti clockwise direction, the milk will begin to increase
    in volume and appear frothy. When the volume of the milk has doubled,
    fully immerse the nozzle and continue heating the milk. Once the desired
    temperature is reached(60° is optimum), stop the steam by turning the
    steam function knob clockwise.
    Note: When operation in steam mode and with the steam function knob
    turned off, some water may drop from the boiler outlet or the attached filter
    holder. This water collects in the drip tray. Alternatively you can place a
    cup under the boiler outlet or the attached filter holder.
    Important: Never operate the steam nozzle for longer than 2 minutes at
    one time.
    Important: Never allow the milk to boil as this will spoil the flavour of the
    coffee.
    Important: To prepare more than one cup of cappuccino, first make all the
    espresso coffees, then at the end prepare the frothed milk for all the
    cappuccinos

Making espresso after frothing milk

  • If you’re making espresso after frothing milk, you need to drain any
    overheated water that could burn your coffee as following.

  • Place a container with at least 30mm depth of cold water underneath the
    steam nozzle, immerge the nozzle into the cold water at least 10mm
    depth. Ensuring the appliance is in the off position then turn the steam
    control knob anti-clockwise until there is no steam coming out the nozzle
    anymore. Now you will be able to make espresso again.
    Automatically power-off function

  • The espresso machine will automatically power off when there is no
    operation within 25 minutes.

ENVIRONMENT

This appliance should not be put into the domestic garbage at the
end of its durability, but must be offered at a central point for the recycling
of electric and electronic domestic appliances. This symbol on the
appliance, instruction manual and packaging puts your attention to this
important issue. The materials used in this appliance can be recycled. By
recycling of used domestic appliances you contribute an important push to
the protection of our environment. Ask your local authorities for information
regarding the point of recollection.
Support
You can find all available information and spare parts at
www.princesshome.eu!

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals