ZKTeco ZKH300 Handheld Terminal User Manual
- June 5, 2024
- ZKTECO
Table of Contents
ZKTeco ZKH300 Handheld Terminal
Packing List
Check the components after opening the box; if any products are missing or the product description appears to have missing pages or has another serious impact on the reading, please contact the seller.
| Item | Model/Spec | Quantity |
|---|---|---|
| SmartPOS | ZKH300 | lpcs |
| Printer Paper | 57 (width)* <D 40 (~40mm) | lpcs |
| Charger | SV/2A | lpcs |
| USB charging cable | MicroUSBSP | lpcs |
| Battery | 7.4V 2800mAh | lpcs |
Instructions of Appearance
- The state of the charging lamp
- Power button
- Mini USB interface
- Micro USB interface
- NFC reader indicator light
- Contactless card reaction area
- LCD
- Paper exit button
- Camera (5M)
- Label
Quick Entry
- Open the device and connect with the network.
- Open the POS trade system.
- Choose the transaction amount
- Swipe your card.
- Enter password.
- Print the purchase order.
- Transaction is completed.
User Manual
Switch machine
- Power on: Long press the power button until the LCD lightens up. Then after releasing the button, the terminal starts.
- Shutdown: To shut down the computer, hold down the power button for several seconds, then click off, and then enter the shutdown procedure.
Swipe contactless card
As shown above, please put the RFID cards on the RFID/NFC contactless card reader.
Contactless card operation
Put the contactless card into the terminal area, where you can finish card
swipping. immediately
Printer
The printer prints the purchase order when the transaction is completed.
Terminal battery charging
You can charge the terminal by using the machine’s USB data cable to connect it to the charger. If you plan to use the terminal for an extended period of time, it is recommended that you turn it off and charge the power every three months.
The charge status lights
The two-color charge status indicator light is as follows:
- The left side of the red light is on: Charging.
- The left side of light is off: Charging is over.
Set aside a R$232 interface Mini USB interface
Notes of Using Lithium Battery
- Do not damage the USB cable, if the USB cable is damaged, you can not continue to use.
- Do not use other charger, you should use our built-in charger to charge the terminal. In case, if the voltage of other chargers is high, then it will damage the equipment.
- Do not place in the sun directly, high temperature, humidity, or in the dusty place.
- Please stay away from the liquid.
- Do not insert any matter into any of the terminal interface, that may seriously damage the terminal.
- The terminal can’t work well, please contact a dedicated POS maintenance personnel, the user shall not be allowed to repair the terminal.
- It is strictly prohibited in the explosion of dangerous places to dismantle terminal, and use the external interface.
- Please wipe with a damp cloth while cleaning.
ADDRESS: ZKTeco Industrial Park, No. 32, Industrial Road, Tangxia Town,
Dongguan, China.
Phone : +86 769 – 82109991
Fax: +86 755-89602394
www.zkteco.com
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>