airLive Voice-VLAN Managed 400W Gigabit PoE Plus Switch Instruction Manual
- June 16, 2024
- airlive
Table of Contents
airLive Voice-VLAN Managed 400W Gigabit PoE Plus Switch
Topology
Constraint Condition
When using the voice VLAN in this scenario, the voice VLAN of the IP phone is delivered through the DHCP server. You need to configure option 184 on the DHCP server of the data to specify the ID of the voice VLAN. Otherwise, the IP phone cannot get the address correctly, and can only get the same IP address as the PC.
Configuration
Data sheet
| Services | VLAN |
|---|---|
| Voice | 20 |
| Data | 10 |
| User Port | GE1 |
| DHCP Server 1 | GE2 |
| DHCP Server 2 | GE3 |
VLAN Setting
Click the “VLAN > VLAN > Create VLAN” in the navigation bar as follows
Click the “VLAN > VLAN > Port Setting”, in the navigation bar as follows
SelectGE1 set PVID to Hybrid VLAN 10
SelectGE2 set PVID to Access VLAN10
SelectGE3 set PVID to Access VLAN20
Click the “VLAN > VLAN > VLAN Configuration” in the navigation bar as
follows
Voice VLAN Setting
Click the “VLAN > Voice VLAN > Property” in the navigation bar as
follows
Click the “VLAN > Voice VLAN > Property” in the navigation bar as
follows
Check the services
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>