STEGO DA 084 Vent Plug Pressure Compensation Device Instruction Manual
- June 13, 2024
- STEGO
Table of Contents
VENT PLUG
DA 084 I IP55
> High degree of protection (IP55)
> Easy to install
DA 084 Vent Plug Pressure Compensation Device
It has become increasingly important to provide a protected enclosure environment for valuable and crucial electrical and electronic components. In a tightly closed enclosure, pressure differentials can occur during extreme temperature variations, such as day/night operation. When this occurs, the risk of dust and humidity ingression into the control panel increases dramatically. The specially designed DA 084 vent plug permits a controlled change in pressure and can easily be installed in any enclosure. The vent plug is suitable for the use in enclosures and electrical cabinets in accordance with DIN EN 62208.
TECHNICAL DATA
| Mounting | PG 29 thread with union nut |
|---|---|
| Torque | 5 Nm |
| Material | plastic, UL 94V-0, light grey weather proof and UV light resistant |
according to UL746C (f1)
Sealing| NBR gasket
Air Interface| Approx. 1.5 cm²
Dimensions| Ø 2.58″ x 1.2″ (Ø 65.5 x 30.5 mm)
Mounting position| vertical1
Operating / Storage temperature| -49 to +158 °F (-45 to +70 °C)
Approvals| EAC
Note| Material adheres to limit values in accordance with RoHS3
1 Protection type is restricted to IP54 if mounting position is not vertical.
Installation: A hole with a diameter of 1.46″ (37 mm) is required for
mounting. Make sure that the sealing gasket is placed on the outer side panel
of the enclosure. For optimal pressure compensation, it is recommended to use
two devices on opposite sides towards the top of the enclosures.
| Part No. | Protection type | 1 packing unit | Weight (approx.) |
|---|---|---|---|
| 08400.9-02-9002 | IP55 | 2 pieces | 1.1 oz. (31 g) |
05.04.2023 | Specifications are subject to change without notice. Suitability of this product for its intended use and any associated risks must be determined by the end customer/buyer in its final application.
Toll free: 1-888-783-4611 (US & Canada
only)
www.stegousa.com
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>