SCHUTTE 60570 Samoa Rain Thermostatic Glass Shelf Shower Instruction Manual
- June 13, 2024
- SCHUTTE
Table of Contents
60570 Samoa Rain Thermostatic Glass Shelf Shower
Instruction Manual
60570 Samoa Rain Thermostatic Glass Shelf Shower
Montageanleitung
Thermostat-Armature met Glasablage
60570 + 60576
Installation instructions
Dear customer,
You have purchased a high-quality and long-lasting product from our line of
goods. Please read these instructions carefully before assembling and observe
the notes. Therefore, keep the instructions in a safe place and pass them on
to possible subsequent owners.
Proper use
This product is suitable for use with instantaneous water heaters. It is not
suitable for low pressure water heaters such as wood or coal burning bath
geysers, oil or gas bath geysers, open electrically heated water tanks. Any
use other than that described here or modification to the product is not
permitted and may lead to damage to persons or property. There is also the
risk of injury and loss of life. The product is intended for personal use only
and not for medical or commercial use.
Safety notes
-
Only allow experts carry out the installation work.
-
CAUTION DAMAGE BY WATER!
Prior to installation please turn the general water supply off. -
Ensure that all gaskets have the correct fit.
-
These taps are not suitable for use on low pressure and small electrical storage heaters.
-
We recommend the installation of a filter into the appliance or at least the use of angle valves with filter, in order to avoid the inflow of foreign matter, which could damage the cartridge.
-
This tap is only intended for use in private households! Only suitable for use in rooms with a temperature over 0 °C, when there is danger of frost, shut off the water supply and empty the tap.
-
Take care when adjusting the warm water. Danger of scalding!
-
Incorrectly installed fittings can cause water damages!
-
Please ensure that no caustic or corrosive products such as detergents or household cleaning products make contact with the connection hoses; this can lead to water damages.
-
Despite careful production, sharp edges can occur. Please exercise caution!
-
DANGER OF LOSS OF LIFE AND ACCIDENT TO INFANTS AND CHILDREN! Never leave children unsupervised with the packaging materials. Danger of suffocation.
-
CAUTION! DANGER OF INJURY!
Please ensure that no parts are damaged and that all parts are correctly assembled. Incorrect assembly or fitting may lead to injury.
Damaged parts can adversely affect safety and proper function. -
CAUTION DANGER OF WATER DAMAGE! Before installation please ensure that there are no water pipes where you are intending to drill.
-
Examine the wall before installation and choose suitable installation fixings. We have supplied fixings suitable for an ordinary solid masonry wall.
-
Please note that seals are wear parts and therefore will require to be replaced from time to time.
-
Warning – risk of electrocution! Make sure that there are no electrical power lines where you are drilling before starting to drill holes.
Installation Instructions
- Check all connections carefully after first-time use to make sure that they are tight.
- We do not assume any warranty for incorrect installation -in particular for subsequent damages!
Shower settings
Use the diverter to set which shower mode is activated (overhead shower or
hand shower).
The slope of the overhead shower can be set as desired by the user.
Instructions for care
Sanitary taps require special care. Therefore, please observe the following
instructions:
- Chrome-plated surfaces are sensitive to lime-dissolving agents, acidic cleaning agents and all kinds of abrasives.
- Never clean coloured surfaces with abrasive, corrosive, or alcoholic agents.
- Only clean your taps with clear water and a soft cloth or a shammy.
Maintenance
- Please check all joints and connections for leaks or visible damages at regular intervals.
- In case of any leaks or visible damages to the fitting or connection hoses, these should be immediately checked by a specialist and replaced if necessary.
Decommissioning
- Cut off the water supply before dismantling the product.
- Pay attention to escaping residual water.
- Disassemble the product in the reverse order of the assembly instructions.
Disposal
Your washbasin tap is delivered in a solid packaging, in order to protect it
against transport damages. The packaging consists of recyclable materials.
Dispose it in an environmentally suitable manner.
Do not throw the product into the normal domestic waste at the end of its
service life, but ask your municipal administration about the possibility of
an environmentally friendly disposal.
**** The illustrations are to be considered as figurative representations,
deviations of the product are possible. Subject to technical modifications.
WARRANTY CARD
The Franz Joseph Schutte GmbH, based in Walkenhorst, shall take on a
manufacturer’s warranty for the product you have procured in accordance with
the warranty conditions stated below. Your legal warranty claims from the
purchase contract with the seller and your legal rights shall not be limited
by this warranty.
Warranty conditions:
-
Scope of warranty
The Franz Joseph Schutte GmbH shall grant a warranty for proper material qualities and material processing in accordance with the intended purpose as well as professional assembly, tightness and function. The warranty shall only apply for the country in which the product has been procured.
Included within the scope of the warranty is a guarantee, reduced to 1 year, for the durability of non-high-gloss chrome-plated surfaces, such as bronzed or coloured surfaces.
Excluded from the warranty are the following:
• Damages due to improper assembly, commissioning and handling
• Valves
• Damages due to external influences such as fire, water and chemical influences
• Mechanical damage due to accidents, falls or impacts
• Negligent or intentional destruction
• Normal wear or poor maintenance
• Damages due to repairs by unqualified persons
• Improper handling, insufficient care and use of unsuitable cleaning agents
• Chemical or mechanical influences during transport, storage, connection, repair and use of the product -
Warranty service
The warranty performance refers, depending on our choice, to repairs conducted free of charge, the free delivery of spare parts or a product of the same quality on return of the deficient part or product. If the type concerned is longer produced, we reserve the right to deliver a replacement product from our range which is as similar as possible to the returned type.
Replaced products or parts are transferred into our property. On returning the product, the purchaser shall bear the costs of transportation and the transport risk if this does not concern a warranty case in accordance with the legal warranty regulations. In the latter case, we shall reimburse the costs of transportation.
The reimbursement of expenses for deinstallation and installation, inspection, claims due to lost profit and for damages are excluded from the warranty, as are any further claims for damages and losses of whatever kind which are
caused through the product or its use. -
Assertion of the warranty claim
The warranty claim must be asserted within the warranty period with the submission of the original receipt of purchase to Franz Joseph Schutte GmbH, Mullenweg 1, 49134 Walkenhorst. -
Warranty period
The warranty period is always of the duration stated on the label or the packaging of each individual product. Should no specific warranty be stated for a specific product, this always totals 2 years from the data of purchase, whereby the date on the purchase receipt is decisive. Exception: The durability of any high-gloss chrome-plated surface, such as bronzed or coloured surfaces; for this purpose, the warranty period totals 1 year; here also the date on the receipt of purchase is decisive.
The warranty period for the product shall neither be extended nor renewed through warranty services. Warranty services shall not limit the warranty period unless a warranty case occurs in accordance with the legal provisions in addition to further legal prerequisites for a limitation. -
German law shall apply under this warranty, under the exclusion of the United Nations Convention on contracts regarding the international sale of goods (CISG).
-
Severability clause
Should any provision in these regulations be or be rendered wholly or partially ineffective, or should the parties inadvertently fail to create a regulation with regard to a matter of this contract, the validity of the other provisions in this contract shall remain unaffected. Instead of the ineffective or infeasible provision, or instead of the contractual gap, an effective or feasible provision shall be added which comes closest to the intent and purpose of the invalid or infeasible provision. In the case of a gap, the provision shall be agreed upon which accords with what would have been agreed upon, in line with the intention and purpose of this contract, had the parties considered the matter from the start. This also applies if the ineffectiveness of a provision is based on a measure of performance or time standardised in this contract. In such cases, a legally permitted measure of performance or time which comes as close as possible to the agreed measure shall replace the agreed one.
Warranty card
The Franz Joseph Schutte GmbH, based in Walkenhorst, shall take on a
manufacturer’s warranty for the product you have procured in accordance with
the warranty conditions stated below. Your legal warranty claims from the
purchase
contract with the seller and your legal rights shall not be limited by this
warranty.
This warranty card is only valid in combination with the associated original
receipt of purchase.
Service Address
http://web.fjschuette.de/garantie/Garantiebedingungen.pdf
Franz Joseph Schutte GmbH | Mullenweg 1, 49134 Walkenhorst | Germany
Tel.: +49 (0) 54 07 / 87 07-0 |
info@fjschuette.de I
www.fjschuette.de
| 
---|---
| 
| 
| 
| 
Replacing the upper parts of the valves
| 
---|---
Replacing the thermostat element
Replacing the diverter
This warranty card is
only valid in combination with the associated original receipt of purchase.
Service Address
Franz Joseph Schutte GmbH
Mullenweg 1
49134 Walkenhorst (Germany)
info@fjschuette.de
www.fjschuette.de