Audi A5 Concert Symphony 10 Inch Touchscreen Android GPS User Guide
- June 13, 2024
- Audi
Table of Contents
Audi A5 Concert Symphony 10 Inch Touchscreen Android GPS
Connections
Easy installation via Plug & Play
POWER CABLE CONNECTION
CENTER SPEAKER CONNECTION
A/C CONNECTOR CANBUS CONNECTION
- Pry open A/C Frame
- Unplug the original A/C Sensor
- Plug the connector with that of the car
FRAME INSTALLATION
- dismantle the frame
- dismantle the frame
- Fix the new plastic mount support and connect the emergency light connector
- Plug the two connectors to the new displav and mount it
- After installation
ANDRIOD MEDIA SOUND
Connect the 3.5mm Aux Output to your car Aux port or to the AMI Adaptor and then to Car AMI Port which is placed in the Hand Glove Compartment
- In Original Radio Menu, Media ->Source select Aux or AMI
Settings
- Tap on SETUP in Main Menu
Camera Settings
Select Camera in Setup Menu, here you can set
- Original or Retrofit Backup Camera
- Rear Camera Parking Lines
- Backup Cam Picture Mirroring
- Rear Camera type
- Camera Switch Time lapse
Navigation Settings
- Select General in Setup Menu, select navigation app settings and select your favorite app for navigation that you want to use
General Settings
- Select System in Setup Menu and then Android settings > here you can change settings like language, Time & Date, Network and much more
Time and date settings
- By default, the system is set up to have a data connection and receives the time from the network
- If you use the system without an Internet connection, it is advisable to change the time and date settings, otherwise the time will be reset each time the device is restarted
Select System in Setup Menu then choose Android settings
Select System and then Date and Time
Deactivate Automatic Date and Time and Automatic Time zone
Select time zone and set your region then you can set time and date manually
Carplay und Android Auto via USB
- OPEN Z LINK APP IN MAIN MENU (ICON CAN BE DIFFERENT)
- CONNECT YOUR SMARTPHONE VIA USB
- CARPLAY / ANDROID AUTO WILL START AUTOMATICALLY
Wireless Carplay for IOS
- Open ZLINK APP
- Turn On Phone Wifi
- Turn On phone Bluetooth and connect with Android Display
- Please be Sure that you are NOT connected with Factory System
DANGER: WIRELESS ANDROID AUTO IS ONLY POSSIBLE FROM ANDROID 11 AND NOT ALL SMARTPHONES ARE SUPPORTED!