Plastica SSW TP 17 Dust Extraction Instructions

Plastica SSW TP 17 Dust Extraction

Product Information

The Aggard Dust Extraction is a filter system designed to remove dust and airborne particles from the air. It is essential for maintaining a clean and safe working environment. The system consists of a filter unit that needs to be regularly checked and maintained to ensure its proper functioning.

Product Usage Instructions

1. Before accessing the filter unit, make sure it is locked out.
2. Avoid accessing the filter unit during adverse weather conditions or when there is a risk of slips or falls.
3. Operators must wear appropriate personal protective equipment (PPE) at all times, including a hi-vis vest, hard hat, safety boots, goggles, gloves, face mask, and disposable paper suit when accessing the internal parts of the filter unit.
4. Always work with a colleague and never attempt to work alone.
5. Use the handrails while walking up and down the step unit.
6. If tools are needed, perform a tool count and list all items taken up the access steps. Ensure all tools are returned before starting the filter unit.
7. Dispose of any damaged or wet filter bags carefully in an airtight rubbish bag before transporting them to the waste skip.
8. Avoid carrying anything heavy up the access steps. The maximum weight should not exceed 10kg.
9. No other staff members or visitors are allowed to walk under or around the step unit while it is in use. Use appropriate signage to indicate restricted access.
10. Always replace the restricted access rope back in place when finished working on the step unit.
11. Do not allow anyone else to use the step unit unless they have received adequate training from the Timber Products Manager.

By signing below, you confirm that you have received the necessary training and understand all the points explained above. You agree to wear the required PPE equipment and take all necessary steps to ensure your own safety. If you require further training or encounter any issues with the machinery, immediately inform your Supervisor or Manager.

• Name: …………………………………………….………….
• Training Date:..…………………………

Instruction

 | Instruction| Understood

√ or X

---|---|---
1| Ensure the filter unit is locked out before accessing the filter unit via the steps.|
2| Ensure the operator does not access step unit to Filter Unit during adverse weather and that conditions do not promote chances of slips, or falling over|
3| Operators must wear appropriate PPE equipment including hi-vis vest, hard hat, safety boots at all times, goggles, gloves, face mask and disposable paper suit when accessing the internal of the filter unit.|
4| Always work as a pair with another colleague, do not attempt to work alone.|
5| Use the handrails whilst walking up and down the step unit.|
6| If tools are to be used, perform a tool count and list the items taken up the access steps. These must all be returned before starting the filter unit.|
7| Carefully dispose of any damaged or wet filter bags in an airtight rubbish bag before transporting to the waste skip.|
8| Do not attempt to carry anything heavy up the access steps, try to keep to a maximum of 10kg.|
9| No other staff members or persons visiting the site are permitted to walk under or around the step unit whilst it is in use. Use appropriate signage.|
10| Always replace the restricted access rope back in place when you are finished working on the step unit.|
11| Never allow other persons up the step unit unless they have had adequate training by the Timber products manager.|

More Information

I have received the above training and fully understand every point that was explained to me. I confirm that I will wear the required PPE equipment when using the above machinery and take all steps to ensure my own safety. I will ask for further training if I need to and will immediately inform the Supervisor or Manager if there are any issues with the machinery.

• Name: ………………………………………………………………………………………………………….
• Signed: ………………………………………………………………..
• Date: …………………………………

I confirm that I have trained the aforementioned person and that they fully understand how to use the above machinery, have received the required PPE equipment and know to inform me immediately of any issues with the machinery or if they require further training. I authorise this person to use the machinery detailed above.

• Name: …………………………………………………………………….…………… (Authorised Trainer)
• Signed ……………………………………………………………………
• Date: ……………………………

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>