GIMA 70410 Craniometro Per Neonati Seca Instructions
- June 22, 2024
- GIMA
Table of Contents
GIMA 70410 Craniometro Per Neonati Seca
FOREWORD
The purpose of this manual is to provide the Customer with all possible
information on the CRANIOMETER, as well as the use and maintenance
instructions to help maintain the performance and efficiency of the
CRANIOMETER over time.
The user manual must be kept in good condition and stored in a place where it
is accessible for quick reference.
The CRANIOMETER may undergo possible updates and for this reason parts other than those shown may be assembled; this eventuality does not affect the explanations contained in the user manual and the safety of the CRANIOMETER itself in any way.
PURPOSE OF THE DEVICE
The CRANIOMETER is a device used to measure the diameter of a baby’s head in
cm, with an accuracy of ± 2 mm, and in inches, with an accuracy of ± 1/8’’.
Skull circumference measurement range 0-60cm – tolerance ± 5mm/ graduation in
mm Skull diameter measurement range 0-19 cm (the diameter is given by the
circumference / π’)
INSTRUCTIONS FOR USE
Unravel the craniometer completely and insert the end between the openings,
keeping the markings facing outwards (see figure 1).
The craniometer is very simple to use: place it on the baby’s head, gently
pull the flap to tighten it around the forehead, then simply read the value
indicated by the arrow on the front of the craniometer.
WARNINGS
The CRANIOMETER must be cleaned with a cloth dampened with substances that do
not damage the material (e.g. alcohol – glass cleaner).
The CRANIOMETER must be stored in its box in a dry place. Any severe incidents
occurring in relation to the medical device we supply must be reported to the
manufacturer and to the competent authority of the Member State where the
device is located.
| Product code
---|---
| Store away from sunlight
| Medical Device compliant with Regulation (EU) 2017/745
| Medical device
| Batch number
| Store in a cool, dry place
| Manufacture
| Date of manufacture
| Attention: Read and follow the instructions (warnings) carefully
| Read the instructions for use
GIMA WARRANTY TERMS
The standard GIMA B2B 12-month warranty applies.
CUSTOMER SUPPORT
70410 (27327)
METRICA S.p.A.
Via Grandi 18 20097 San Donato Milanese (Mi) Made in Italy
ev.0-05.24
70410 (27327)
Distributed by Gima S.p.A.
Via Marconi, 1 – 20060 Gessate (MI) Italy
[email protected] –
[email protected]
www.gimaitaly.com