LANDMARK LM-BH123 Ear True Wireless Earbuds Instruction Manual
- June 15, 2024
- Landmark
Table of Contents
TWS Bluetooth Earbuds
Instruction manual
Chinese/English prompt tone switching:
TWS pairing is not connected to the phone, 5 click the left/right ear, and
hear “Chinese “Or “English” prompt, the prompt switch is successful
Product Description
- Multi-function touch button
- Earbud indicator/microphone
- charging compartment indicator
- Indicator light
- Type-C USB charging port
Power on/off
Power on: The headset will automatically turn on when the charging
compartment is opened, or manually press and hold the touch button for 5S.
Power off: Put the earphone into the charging compartment and close the cover.
The earphone will automatically shut down. If it is not connected to any
device within 2 minutes, it will automatically shut down.
**Bluetooth pairing
**
- Open the charging compartment and take out the earbud to turn it on automatically.
- After turning on, put the left and right earphones close to each other. After the team is successful, the indicator light: the main earphone flashes red and blue lights alternately, and the auxiliary ear flashes blue light once every 5 seconds.
- Open the phone’s Bluetooth connection interface, search for “JX12”, click pair, then the connection is successful and accompanied by a tone.
Music
- Music pause/play: During playback, short press the multi-touch button.
- Previous song: Double-click the left ear multi-function touch button.
- Next song: Double-click the right ear multi-function touch button.
Wake up voice assistant function
(requires mobile phone support)
- After successfully connecting with the mobile phone, except during a call, press the multi-function touch key three times to activate the voice assistant function (SIRI).
Call
- Answer: When a call comes In, short press the multi-Unction touch key.
- Reject: When there is an incoming call, press and hold the multi-function button for 2 seconds.
- Hang up: During a call, short press the multi-function touch key.
Headset restore factory settings
When the headset is on, press and hold the left/right
headset multi-function button for 5S to clear the pairing.
Charging
- Charge the charging bin through the charging cable, and the indicator light of the bin is always on when it is fully charged.
- Put the earphone into the charging compartment, and it will be charged automatically. When the earphone is fully charged, the indicator light of the earphone will go out.
| Earbuds charging | Red light is on |
|---|---|
| Earbuds is fully charged | Red light is off |
| Charging compartment is charging | Red light is light up in sequence |
| Charging compartment is fully charged | The light is always on |
Specifications
- Model: JX12
- Bluetooth version: 5.2
- Single earbud weight: 3g
- Earbud size: 33.51726MM
- Earbud battery capacity: 3.7V/2*35mAh
- Earbud charging time: about 30 minutes
- Play music time: about 4.5 hours(Medium volume)
- Support Agreement: SPP / HFP / A2DP / AVCTP / HID
- Frequency: 2.4GHz~2.48GHz
- Bluetooth distance: 10M
- Power input: DC 5V/500mA
- Charging compartment battery capacity: 3.7V/320mAh
- Charging bin to charge the earbud: 2 times
- Charging bin size: §92552mm
- Charging bin weight: 34g