WORX WG263E Cordless Hedge Trimmer Instruction Manual

WORX WG263E Cordless Hedge Trimmer

Product Information

The Cordless Hedge Trimmer WG263E WG263E.X is a power tool designed for trimming hedges and bushes. It is cordless, providing freedom of movement and eliminating the need for a power outlet. The trimmer features a durable construction and is equipped with a powerful motor for efficient cutting. It is suitable for both indoor and outdoor use.

Product Usage Instructions

Safety Instructions
Before using the Cordless Hedge Trimmer, please read and follow all safety instructions provided in the user manual. Failure to do so may result in electric shock, fire, or serious injury.

Component List
Ensure that all components listed in the user manual are included with your trimmer. If any component is missing or damaged, do not use the trimmer and contact customer support for assistance.

Technical Data
Refer to the technical data section in the user manual for information on the trimmer’s specifications, including power rating, battery capacity, cutting capacity, and weight. Familiarize yourself with these specifications before operating the trimmer.

Intended Use
The Cordless Hedge Trimmer is designed for trimming hedges and bushes. It should only be used for its intended purpose and within its specified capabilities. Do not use the trimmer for any other tasks.

Operating Instructions

1. Ensure that the battery is fully charged before use.
2. Inspect the trimmer for any visible damage or defects. Do not use a damaged trimmer.
3. Wear appropriate personal protective equipment, including eye protection and gloves.
4. Position yourself securely and maintain proper footing and balance.
5. Switch on the trimmer using the designated switch or button.
6. Hold the trimmer with both hands, ensuring a firm grip.
7. Move the trimmer in a controlled and steady manner along the hedges or bushes, cutting the desired branches.
8. Avoid overreaching and maintain awareness of your surroundings.
9. Switch off the trimmer after use and store it in a safe place.

Maintenance
Regularly clean the trimmer after each use to remove any debris or plant matter. Inspect the cutting blades for sharpness and damage, and replace them if necessary. Refer to the maintenance section in the user manual for detailed instructions on cleaning and maintenance procedures.

Environmental Protection
Dispose of the trimmer and its components in accordance with local environmental regulations. Do not dispose of them in regular household waste.

Declaration of Conformity
The Cordless Hedge Trimmer complies with all relevant safety and quality standards. The declaration of conformity can be found in the user manual.

SAFETY INSTRUCTIONS

PRODUCT SAFETY GENERAL POWER TOOL SAFETY WARNINGS
WARNING Read all safety warnings, instructions, illustrations and specifications provided with this power tool. Failure to follow the warnings and instructions may result in electric shock, fire and/or serious injury.
Save all warnings and instructions for future reference.
The term “power tool” in the warnings refers to your mains-operated (corded) power tool or battery-operated (cordless) power tool.

1. Work area safety
   • Keep work area clean and well lit. Cluttered or dark areas invite accidents.
   • Do not operate power tools in explosive atmospheres, such as in the presence of flammable liquids, gases or dust. Power tools create sparks which may ignite the dust or fumes.
   • Keep children and bystanders away while operating a power tool. Distractions can cause you to lose control.
2. Electrical safety
   • Power tool plugs must match the outlet. Never modify the plug in any way. Do not use any adapter plugs with earthed (grounded) power tools. Unmodified plugs and matching outlets will reduce risk of electric shock.
   • Avoid body contact with earthed or grounded surfaces, such as pipes, radiators, ranges and refrigerators. There is an increased risk of electric shock if your body is earthed or grounded.
   • Do not expose power tools to rain or wet conditions. Water entering a power tool will increase the risk of electric shock.
   • Do not abuse the cord. Never use the cord for carrying, pulling or unplugging the power tool. Keep cord away from heat, oil, sharp edges or moving parts. Damaged or entangled cords increase the risk of electric shock.
   • When operating a power tool outdoors, use an extension cord suitable for outdoor use. Use of a cord suitable for outdoor use reduces the risk of electric shock.
   • If operating a power tool in a damp location is unavoidable, use a residual current device (RCD) protected supply. Use of an RCD reduces the risk of electric shock.
3. Personal safety
4. Stay alert, watch what you are doing and use common sense when operating a power tool. Do not use a power tool while you are tired or under the influence of drugs, alcohol or medication. A moment of inattention while operating power tools may result in serious personal injury.
5. Use personal protective equipment. Always wear eye protection. Protective equipment such as dust mask, non-skid safety shoes, hard hat, or hearing protection used for appropriate conditions will reduce personal injuries.
6. Prevent unintentional starting. Ensure the switch is in the off-position before connecting to power source and/or battery pack, picking up or carrying the tool. Carrying power tools with your finger on the switch or energising power tools that have the switch on invites accidents.
7. Remove any adjusting key or wrench before turning the power tool on. A wrench or a key left attached to a rotating part of the power tool may result in personal injury.
8. Do not overreach. Keep proper footing and balance at all times. This enables better control of the power tool in unexpected situations.
9. Dress properly. Do not wear loose clothing or jewellery. Keep your hair, clothing and gloves away from moving parts. Loose clothes, jewellery or long hair can be caught in moving parts.
10. If devices are provided for the connection of dust extraction and collection facilities, ensure these are connected and properly used. Use of dust collection can reduce dust-related hazards.
11. Do not let familiarity gained from frequent use of tools allow you to become complacent and ignore tool safety principles. A careless action can cause severe injury within a fraction of a second.
12. Power tool use and care
    • Do not force the power tool. Use the correct power tool for your application. The correct power tool will do the job better and safer at the rate for which it was designed.
    • Do not use the power tool if the switch does not turn it on and off. Any power tool that cannot be controlled with the switch is dangerous and must be repaired.
    • Disconnect the plug from the power source and/or the battery pack from the power tool before making any adjustments, changing accessories, or storing power tools. Such preventive safety measures reduce the risk of starting the power tool accidentally.
    • Store idle power tools out of the reach of children and do not allow persons unfamiliar with the power tool or these instructions to operate the power tool. Power tools are dangerous in the hands of untrained users.
    • Maintain power tools. Check for misalignment or binding of moving parts, breakage of parts and any other condition that may affect the power tool’s operation. If damaged, have the power tool repaired before use. Many accidents are caused by poorly maintained power tools.
    • Keep cutting tools sharp and clean. Properly maintained cutting tools with sharp cutting edges are less likely to bind and are easier to control.
    • Use the power tool, accessories and tool bits etc. in accordance with these instructions, taking into account the working conditions and the work to be performed. Use of the power tool for operations different from those intended could result in a hazardous situation.
    • Keep handles and grasping surfaces dry, clean and free from oil and grease. Slippery handles and grasping surfaces do not allow for safe handling and control of the tool in unexpected situations.
13. Battery tool use and care
    • Recharge only with the charger specified by the manufacturer. A charger that is suitable for one type of battery pack may create a risk of fire when used with another battery pack.
    • Use power tools only with specifically designated battery packs. Use of any other battery packs may create a risk of injury and fire.
    • When battery pack is not in use, keep it away from other metal objects, like paper clips, coins, keys, nails, screws or other small metal objects, that can make a connection from one terminal to another. Shorting the battery terminals together may cause burns or a fire.
    • Under abusive conditions, liquid may be ejected from the battery; avoid contact. If contact accidentally occurs, flush with water. If liquid contacts eyes, additionally seek medical help. Liquid ejected from the battery may cause irritation or burns.
    • Do not use a battery pack or tool that is damaged or modified. Damaged or modified batteries may exhibit unpredictable behaviour resulting in fire, explosion or risk of injury.
    • Do not expose a battery pack or tool to fire or excessive temperature. Exposure to fire or temperature above 130 °C may cause explosion.
    • Follow all charging instructions and do not charge the battery pack or tool outside the temperature range specified in the instructions. Charging improperly or at temperatures outside the specified range may damage the battery and increase the risk of fire.
14. Service
    • Have your power tool serviced by a qualified repair person using only identical replacement parts. This will ensure that the safety of the power tool is maintained.
    • Never service damaged battery packs. Service of battery packs should only be performed by the manufacturer or authorized service providers.

HEDGE TRIMMER SAFETY
WARNINGS

• Keep all parts of the body away from the blade. Do not remove cut material or hold material to be cut when blades are moving. Blades continue to move after the switch is turned off. A moment of inattention while operating the hedge trimmer may result in serious personal injury.
• Carry the hedge trimmer by the handle with the blade stopped and taking care not to operate any power switch. Proper carrying of the hedge trimmer will decrease the risk of inadvertent starting and resultant personal injury from the blades.
• When transporting or storing the hedge trimmer, always fit the blade cover. Proper handling of the hedge trimmer will decrease the risk of personal injury from the blades.
• When clearing jammed material or servicing the unit, make sure all power switches are off and the battery back is removed or disconnected. Unexpected actuation of the hedge trimmer while clearing jammed material or servicing may result in serious personal injury.
• Hold the hedge trimmer by insulated gripping surfaces only, because the blade may contact hidden wiring. Blades contacting a “live” wire may make exposed metal parts of the hedge trimmer “live” and could give the operator an electric shock.
• Keep all power cords and cables away from cutting area. Power cords or cables may be hidden in hedges or bushes and can be accidentally cut by the blade.
• Do not use the hedge trimmer in bad weather conditions, especially when there is a risk of lightning. This decreases the risk of being struck by lightning.
• Check the hedges and bushes for foreign objects, e.g. wire fences and hidden wiring.
• Hold the hedge trimmer properly, e.g. with both hands if two handles are provided.
• The hedge trimmer is intended to be used by the operator at ground level and not on ladders or any other unstable support.
• Before operating the hedge trimmer, the user should make sure the locking device(s) of any moving elements (e.g. the extended shaft and pivoting element), if any, are in the locked position.

SAFETY WARNINGS FOR BATTERY PACK

• Do not dismantle, open or shred cells or battery pack.
• Do not short-circuit a battery pack. Do not store battery packs haphazardly in a box or drawer where they may short-circuit each other or be short-circuited by conductive materials. When battery pack is not in use, keep it away from other metal objects, like paper clips, coins, keys, nails, screws or other small metal objects, that can make a connection from one terminal to another. Shorting the battery terminals together may cause burns or a fire.
• Do not expose battery pack to heat or fire. Avoid storage in direct sunlight.
• Do not subject battery pack to mechanical shock.
• In the event of battery leaking, do not allow the liquid to come into contact with the skin or eyes. If contact has been made, wash the affected area with copious amounts of water and seek medical advice.
• Keep battery pack clean and dry.
• Wipe the battery pack terminals with a clean dry cloth if they become dirty.
• Battery pack needs to be charged before use. Always refer to this instruction and use the correct charging procedure.
• Do not maintain battery pack on charge when not in use.
• After extended periods of storage, it may be necessary to charge and discharge the battery pack several times to obtain maximum performance.
• Recharge only with the charger specified by Worx. Do not use any charger other than that specifically provided for use with the equipment.
• Do not use any battery pack which is not designed for use with the equipment.
• Keep battery pack out of the reach of children.
• Retain the original product literature for future reference.
• Remove the battery from the equipment when not in use.
• Dispose of properly.
• Do not mix cells of different manufacture, capacity, size or type within a device.
• Keep the battery away from microwaves and high pressure.
• Warning! Do not use non-rechargeable batteries.

SYMBOLS

COMPONENT LIST

1. BATTERY PACK *
2. REAR HANDLE
3. FRONT HANDLE
4. SAFETY GUARD
5. OPERATOR PRESENCE SWITCH (ALL AROUND SWITCH FUNCTION)
6. THROTTLE TRIGGER
7. BATTERY PACK RELEASE BUTTON*
8. BLADE
9. BLADE SHEATH

• Not all the accessories illustrated or described are included in standard delivery.

TECHNICAL DATA

Type Designation: WG263E WG263E.X (230- 269- designation of machinery, representative of cordless hedge trimmer)

• Power 20V Max** Lithium
• No load speed 3400/min
• Blade length 57cm (22”)
• Cutting length 54cm (21’’)
• Tooth Spacing 33mm (1-1/4’’)
• Cutting diameter 27mm (1’’)
• Machine Weight (bare tool) 2.5kg (5.5lbs)
  • Voltage measured without workload. Initial battery voltage reaches maximum of 20 volts. Nominal voltage is 18 volts.
  • X=1-999, A-Z, M1-M9 there are only used for different customers, there are no safe relevant changes between these models.

SUGGESTED BATTERIES AND CHARGERS

We recommend that you purchase your accessories from the same store that sold you the tool. Refer to the accessory packaging for further details. Store personnel can assist you and offer advice.

NOISE INFORMATION

VIBRATION INFORMATION
Vibration total values (triax vector sum) determined according to EN 62841:

• Vibration emission value:
• Front handle ah = 1.59 m/s2
• Rear handle ah = 1.56 m/s2
• Uncertainty K = 1.5 m/s²
  The declared vibration total value and the declared noise emission value have been measured in accordance with a standard test method and may be used for comparing one tool with another. The declared vibration total value and the declared noise emission value may also be used in a preliminary assessment of exposure.

WARNING:
The vibration emission value during actual use of the power tool can differ from the declared value depending on the ways in which the tool is used dependant on the following examples and other variations on how the tool is used:

• How the tool is used and the materials being cut or drilled.
• The tool being in good condition and well maintained.
• The use the correct accessory for the tool and ensuring it is sharp and in good condition.
• The tightness of the grip on the handles and if any anti vibration accessories are used.
• And the tool is being used as intended by its design and these instructions.
• This tool may cause hand-arm vibration syndrome if its use is not adequately managed.

WARNING:

• To be accurate, an estimation of exposure level in the actual conditions of use should also take account of all parts of the operating cycle such as the times when the tool is switched off and when it is running idle but not actually doing the job. This may significantly reduce the exposure level over the total working period.
• Helping to minimise your vibration exposure risk.
• ALWAYS use sharp chisels, drills and blades
• Maintain this tool in accordance with these instructions and keep well lubricated (where appropriate)
• If the tool is to be used regularly then invest in anti vibration accessories.
• Plan your work schedule to spread any high vibration tool use across a number of days.

INTENDED USE

The machine is intended for cutting and trimming hedges and bushes in domestic use.

OPERATING INSTRUCTIONS

NOTE: Before using the tool, read the instruction book carefully.
WARNING! Do not use the product without attaching the guard and front handle.

ASSEMBLY & OPERATION

• ASSEMBLY

  • Installing and Removing the battery pack
  • Charging the battery pack
  • Your battery pack is UNCHARGED, you must charge before use.
  • More details can be found in charger’s manual.

• OPERATION

  • Starting and stopping

  • Top cutting
    WARNING: If any parts are missing, damaged or broken, do not operate your hedge trimmer until all damaged parts have been replaced or repaired. Failure to do so could result in serious personal injury. DO NOT USE WITHOUT FRONT HANDLE AND SAFETY GUARD.

  • Side cutting

  • Lubricating the Cutting Blade

  • Remove the battery pack from the trimmer.

  • Place the trimmer on a level surface.

  • Apply some lubrication oil along the edge of the blade.

  • It is recommended to oil the machine after using your hedge trimmer for an extended period.
    WARNING: Do not oil the blade when the trimmer is running.

HOW TO USE YOUR HEDGE TRIMMER
Note that the front switch lever can be activated on three sides, giving you many choices for a comfortable grip. Before cutting an area, inspect it first and remove any foreign objects that could become thrown or entangled in the blades. Always hold the trimmer with both hands and with the blade away from you before turning it on.

• When trimming new growth, use a wide sweeping action so that the stems are fed directly into the blade. (See Fig. C& D)
• Allow the cutting blades to reach full speed before cutting. When operating, keep the cutting blades away from people and objects such as walls, large stones, trees, vehicles, etc.
• If the blade stalls, immediately stop the trimmer.
• Release the two Switch components (5 & 6) before attempting to clear jammed debris from the cutting blades.
• Wear gloves when trimming thorny or prickly growth.
• Do not attempt to cut stems that are too thick for the cutting blade.

TOP CUTTING
Use a wide sweeping motion (See Fig. C). A slight downward tilt of the cutting blades in the direction of motion gives the best cutting results.

SIDE CUTTING
When trimming the sides of the hedge, begin at the bottom and cut upwards (See Fig. D), tapering the hedge inward at the top. This shape will expose more of the hedge, resulting in a more uniformed growth.

MAINTENANCE

Remove battery before carrying out any adjustment, servicing or maintenance.
There are no user serviceable parts in your power tool. Never use water or chemical cleaners to clean your power tool. Wipe clean with a dry cloth. Always store your power tool in a dry place. Keep the motor ventilation slots clean. Keep all working controls free of dust.

FOR BATTERY TOOLS

• The ambient temperature range for the use and storage of tool and battery is 0 ℃~45 ℃ (32 ℉~113 ℉).
• The recommended ambient temperature range for the charging system during charging is 0 ℃ ~40 ℃ (32 ℉ ~104 ℉ ).

ENVIRONMENTAL PROTECTION

Waste electrical products should not be disposed of with household waste. Please recycle where facilities exist. Check with your Local Authority or retailer for recycling advice.

DECLARATION OF CONFORMITY

• Positec Germany GmbH Postfach 32 02 16, 50796 Cologne, Germany

• On behalf of Positec declare that the product Description Battery-powered Hedge Trimmer Type WG263E WG263E.X (230-269- designation of machinery, representative of cordless Hedge Trimmer)

• Function Trimming hedges and brushes

• Complies with the following Directives:

  • 2006/42/EC
  • 2014/30/EU
  • 2011/65/EU&(EU)2015/863
  • 2000/14/EC amended by 2005/88/EC
  • 2000/14/EC amended by 2005/88/EC:
  • Conformity Assessment Procedure as per Annex V
  • Measured Sound Power Level 94.05 dB(A)
  • Declared Guaranteed Sound Power Level 96 dB(A)
  • Standards conform to
  • EN 62841-1, EN 62841-4-2
  • EN ISO 3744, EN IEC 55014-1, EN IEC 55014-2
  • The person authorized to compile the technical file,
  • Name Marcel Filz
  • Address Positec Germany GmbH
  • Postfach 32 02 16, 50796 Cologne, Germany

• 2023/03/23

• Allen Ding

• Deputy Chief Engineer, Testing & Certification

• Positec Technology (China) Co., Ltd

• 18, Dongwang Road, Suzhou Industrial

• Park, Jiangsu 215123, P. R. China

DECLARATION OF CONFORMITY

• Positec (UK & Ireland) Ltd, PO Box 6242, Newbury, RG14 9LT, UK

• On behalf of Positec declare that the product Description Battery-powered Hedge Trimmer Type WG263E WG263E.X (230-269- designation of machinery, representative of cordless Hedge Trimmer)

• Function Trimming hedges and brushes

• Complies with the following regulations:

  • Supply of Machinery (Safety) Regulations 2008 Electromagnetic Compatibility Regulations 2016 The Restriction of the Use of Certain Hazardous Substances in Electrical and Electronic Equipment Regulations
  • Noise Emission in the Environment by Equipment for Use Outdoors Regulations

• Conformity assessment procedure as per SCHEDULE 8

• Measured Sound Power Level 94.05 dB(A)

• Declared Guaranteed Sound Power Level 96 dB(A)

• Standards conform to,

  • BS EN 62841-1, BS EN 62841-4-2, BS EN ISO 3744,
  • BS EN IEC 55014-1, BS EN IEC 55014-2

• The person authorized to compile the technical file,

  • Name: Jim Kirkwood
  • Address Positec (UK & Ireland) Ltd,
  • PO Box 6242, Newbury, RG14 9LT, UK

• 2023/03/23

• Allen Ding

• Deputy Chief Engineer, Testing & Certification

• Positec Technology (China) Co., Ltd

• 18, Dongwang Road, Suzhou Industrial

• Park, Jiangsu 215123, P. R. China

References

• Lawn & Garden Equipment | Innovative Power Tools | WORX

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>