Plastica SSW MOU 19 Chop Saw Instructions
- June 13, 2024
- Plastica
Table of Contents
Plastica SSW MOU 19 Chop Saw
Product Information
Product Name: Pipe and Profiles Water Check System
Safe System of Work
The Pipe and Profiles Water Check System ensures safe operation of the
extruder machine by following a set of operating instructions and safety
protocols.
Operating Instructions
- Explain that safety equipment must be used at all times when running the machines.
- Before starting up the extruder, turn on the inlet and outlet water valves.
- Start up the pump on the vacuum tank.
- Leave the water to flow for a minimum of 10 minutes.
- If the water flow is constant after 10 minutes, you can start up the extruder.
- During production, put the first two packs aside and leave them for one hour.
- Perform a quality check on the first two packs before putting them into stock.
- Do not use any machine unless trained and authorized by a Manager.
User Confirmation
I have received the above training and fully understand every point that was explained to me. I confirm that I will wear the required Personal Protective Equipment (PPE) when using the abovemachinery and take all steps to ensure my own safety. I will ask for further training if needed and will immediately inform theSupervisor or Manager if there are any issues with the machinery.
User Details
- Name: [User’s Name]
- Signed: [User’s Signature]
- Date: [Training Date]
Trainer Confirmation
I confirm that I have trained the aforementioned person and that they fully
understand how to use the above machinery, have received the required PPE
equipment, and know to inform me immediately of any issues with the machinery
or if they require further training. I authorize this person to use the
machinery detailed above.
Trainer Details
- Name: [Trainer’s Name]
- Signed: [Trainer’s Signature]
- Date: [Current Date]
Safe System of Work
OPERATING INSTRUCTIONS BEFORE STARTING UP PIPE AND PROFILES WATER CHECK
- Name: …………………………………………….………….
- Training Date:…..…………………………
|
Instruction
| Understood
---|---|---
1| Explain that safety equipment must be used at all times and why – safety
boots must be used at all times when running machines|
2| Before starting up the extruder, turn on the inlet and outlet water valves|
3| Start up the pump on the vacuum tank|
4| Leave the water to flow for 10 minutes minimum|
5| After 10 minutes if the water flow is constant you can then start up the
extruder|
6| When you are in production, put the first two packs to one side, leave for
one hour then do the quality check before putting them into stock|
7| Do not use any machine unless trained and authorized by Manager.|
I have received the above training and fully understand every point that was explained to me. I confirm that I will wear the required PPE equipment when using the above machinery and take all steps to ensure my own safety. I will ask for further training if I need to and will immediately inform the Supervisor or Manager if there are any issues with the machinery.
- Name: ………………………………………………………………………………………………………….
- Signed: ………………………………………………………………..
- Date:…………………………………
I confirm that I have trained the aforementioned person and that they fully understand how to use the above machinery, have received the required PPE equipment and know to inform me immediately of any issues with the machinery or if they require further training. I authorise this person to use the machinery detailed above.
- Name: …………………………………………………………………….……………(Authorised Trainer)
- Signed ……………………………………………………………………
- Date: ……………………………
SSW MOU 19 – 22/04/2020
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>