NOVUS NVE-VDB200OUT Outdoor Video Doorbell Instruction Manual

NOVUS NVE-VDB200OUT Outdoor Video Doorbell

Product Information

• Product Name: NVE-VDB200OUT
• Product Type: Outdoor video doorbell
• Version: 1.0
• Manufacturer: AAT SYSTEMY BEZPIECZESTWA Sp. z o.o.

Product Usage Instructions

1. Before installation and operation, carefully read and familiarize yourself with the user manual and safety requirements provided.
2. Please keep the user manual for future reference during the operation of the device.
3. Ensure proper ventilation during installation and do not install the device in locations where proper ventilation cannot be ensured.
4. The product includes a microphone, camera, IR LEDs, Unique 125 kHz card reader, doorbell button, and speaker.
5. Refer to the packaging contents for included accessories and mounting options.
6. To connect using the KD controller, follow the wiring diagrams provided in the manual.
7. For proximity card functionality, ensure that WG1 and WG0 wires are connected.

THE PRODUCT MEETS THE REQUIREMENTS CONTAINED IN THE FOLLOWING DIRECTIVES:
Directive 2014/53/EU of the European Parliament and of the Council of 16 April 2014 on the harmonization of the laws of the Member States relating to the making available on the market of radio equipment and repealing Directive 1999/5/EC Text with EEA relevance.
Directive 2014/30/EU of the European Parliament and of the Council of 26 February 2014 on the harmonization of the laws of the Member States relating to electromagnetic compatibility (recast) Text with EEA relevance.
Directive 2014/35/EU of the European Parliament and of the Council of 26 February 2014 on the harmonization of the laws of the Member States relating to the making available on the market of electrical equipment designed for use within certain voltage limits Text with EEA relevance.
Directive 2012/19/EU of the European Parliament and of the Council of 4 July 2012 on waste electrical and electronic equipment (WEEE) Text with EEA relevance
Directive 2011/65/EU of the European Parliament and of the Council of 8 June 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment Text with EEA relevance.

Information
The device, as a part of professional intercom system used for surveillance and control, is not designed for self -installation in households by individuals without technical knowledge.

WARNING!
PRIOR TO UNDERTAKING ANY ACTION THAT IS NOT DESCRIBED FOR THE GIVEN PRODUCT IN USER’S MANUAL AND OTHER DOCUMENTS DELIVERED WITH THE PRODUCT, OR IF IT DOES NOT ARISE FROM THE USUAL APPLICATION OF THE PRODUCT, MANUFACTURER MUST BE CONTACTED UNDER THE RIGOR OF EXCLUDING THE MANUFACTURER’S RESPONSIBILITY FOR THE RESULTS OF SUCH AN ACTION.

WARNING!
THE KNOWLEDGE OF THIS MANUAL IS AN INDESPENSIBLE CONDITION OF A PROPER DEVICE OPERATION. YOU ARE KINDLY REQUSTED TO FAMILIRIZE YOURSELF WITH THE MANUAL PRIOR TO INSTALLATION AND FURTHER DEVICE OPERATION.

WARNING!
USER IS NOT ALLOWED TO DISASSEMBLE THE CASING AS THERE ARE NO USER -SERVICEABLE PARTS INSIDE THIS UNIT. ONLY AUTHORIZED SERVICE PERSONNEL MAY OPEN THE UNIT INSTALLATION AND SERVICING SHOULD ONLY BE DONE BY QUALIFIED SERVICE PERSONNEL AND SHOULD CONFORM TO ALL LOCAL

REGULATIONS
WARNING!
INFORMATION IN THIS MANUAL IS SUBJECT TO CHANGE WITHOUT NOTICE. THE COMPANY AAT SYSTEMY BEZPIECZEŃSTWA SP. Z O.O. RESERVES THE RIGHT TO EXPLANATE AND UPDATE THE INFORMATION CONTAINED IN THIS DOCUMENT.

IMPORTANT SAFEGUARDS AND WARNINGS:

1. Prior to undertaking any action please consult the following manual and read all the safety and operating instructions before starting the device.

2. Please keep this manual for the lifespan of the device in case referring to the contents of this manual is necessary;

3. All the safety precautions referred to in this manual should be strictly followed, as they have a direct influence on user’s safety and durability and reliability of the device;

4. All actions conducted by the servicemen and users must be accomplished in accordance with the user’s manual;

5. The device should be disconnected from power sources during maintenance procedures;

6. Usage of additional devices and components neither provided nor recommended by the producer is forbidden;

7. Mounting the device on unstable surface or using not recommended mounts is forbidden.

8. Improperly mounted device may cause a fatal accident or may be seriously damaged itself. Device must be mounted by qualified personnel with proper authorization, in accordance with this user’s manual;

9. Device should be supplied only from a power sources whose parameters are in accordance with those specified by the producer in the device’s technical datasheet. Therefore, it is forbidden to supply the device from a power sources with unknown parameters, unstable or not meeting producer’s requirements;

10. Signal and power cables should be placed in a way excluding the possibility of damaging them by accident. Special attention must be paid to cables getting from the device and connecting the power supply;

11. Electric installation supplying the device should be designed to meet the specifications given by the producer in such a way that overloading is impossible;

12. User cannot repair or upgrade the equipment himself. All maintenance actions and repairs should be conducted only by qualified service personnel;
    Unplug the device from the power source immediately and contact the proper maintenance department when the following occurs:

13. Damages to the power cord or to the plug itself;

14. Liquids getting inside the device or exposure to strong mechanical shock;

15. Device behaves in a way not described in the manual and all adjustments approved by the

16. manufacturer and possible to apply by user himself, seem not to have any effect;

17. Device is damaged;

18. Atypical behaviour of the device components may be seen (heard).

19. In necessity of repairs attention to using only original replacement parts (with their parameters in accordance with those specified by the producer) should be paid. Non-licensed service and non-genuine replacement parts may cause fire or electrocution;

20. After maintenance activities tests should be run to ensure proper operation of all the functional components of the device.

Device information

Features

• Surface/Corner mounting.
• Vandal-proof zinc alloy housing.
• Resolution 1080P.
• Type of signal: AHD (Default)/CVBS/CVI/TVI.
• Wide viewing angle 120°.
• Protection class IP66.
• Unique 125 kHz proximity reader.
• Compatible with Wiegand 26.
• Working temperature from -30°C to 60°C.
• Dimensions: 131 x 46 x 20 mm.
• Working voltage 10 – 15 V DC.
• Power consumption: 3,5 W (Maks.).
• Relay NO/NC (36 V AC/DC, 4 A).

Package contents

Wiring diagrams

Wiegand 26 card reader

NO unlock wiring

NC unlock wiring

Swiping card operation

NOTE!
When the video doorbell works as cards manager, WG1 & WG0 should be connected together.

1. Master card registation
   For the first time to use, the speaker keeps beep sound and call button indicator lights keeps blinking. When you swipe a card, there will be a beep sound at the same time, then this card is successfully authorized as a master card. (Master card can not be used to open the lock.)

2. User card registration

3. Swipe master card 1 time, button indicator will keep lighting on, then swipe another card, which will be added as an user card. Continue to swipe other cards one after another can add more user cards. Swipe an added user card again to exit the setting mode when you finished operation. The doorbell will exit from setting mode automatically when there is no operation in 30 seconds.

4. Up to 100 user cards can be registered by the doorbell. Card reading distance should be less than 3cm. The master card is necessary when you add or delete user cards. Please keep it well for future use.

5. Deleting master and user cards

6. Swipe the master card 4 times in a row, all user cards and the master card will be deleted, loudspeaker keeps beep sound and the button indicator lights keeps blinking again which means new master card can be register,

7. If the master card is lost, shortly press “RESET” button in the rear side can also delete the master card and all user cards.

8. Swiping car unlock
   In the standby mode, swipe a user card, the door lock will be opened. Please note that he default unlock time for a lock is 5 seconds.

Video Doorbell operation

Pressing the call button will make the call. Operation from the user monitor interface is described in the manual of the IP user monitor NVE-M200WIFI.

Notes:

• When lock is powered by 12 VDC, lock and built-in card reader can use the same power supply.
• Long press “Camera signal switch & RESET button” more than 5 seconds to switch camera signal AHD /CVBS / CVI / TVI. AHD mode is recommended.
• Short press “Camera signal switch & RESET button” less than 2 seconds to restore factory default.
• The maximum cable length between the monitor and the doorbell is 20m.
• If the doorbell operates as a Wiegand 26 reader, the decision to open is made by the access control controller, not by the doorbell.

Doorbell installation

1. Please select the most suitable doorbell position, avoid direct sunshine to camera, dark surroundings, rain.
2. Determine doorbell installation height: suggest to be 1.5~1.6 meters.
3. Dig a hole at the suitable height on the wall.
4. Disassemble bracket from the outdoor panel.
5. Fix the bracket on the wall with screws and expansion bolts.
6. Make the cables through the wall & bracket to connect to the doorbell connector wire.
7. Put the outdoor panel onto the bracket, and fix it with the screw on the bottom.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>