RUGGED RIDGE 11025.24 Trail Mirror Rectangular Instructions
- June 13, 2024
- RUGGED RIDGE
Table of Contents
RUGGED RIDGE 11025.24 Trail Mirror Rectangular
Product Information
- Product Name: Trail Mirror, Rectangular; JL & Gladiator
- Model Number: IS-TMRT-01
- Part Numbers: 11025.24 (1 unit), 11025.26 (2 units)
- Manufacturer: Omix-ADA
- Address: 460 HORIZON DR. SUITE 400, SUWANEE, GA 30024
- Phone: 770-614-6101
- Fax: 844-270-0593
- Website: www.Omix-ADA.com
- Email for Warranty or Technical Concerns: webmaster@omixsupport.com
Product Usage Instructions
- Remove the nut on the windshield hinge and replace it with the Mounting Stud provided.
- Loosely install the M12 Jam Nut and Mirror Arm onto the Mounting Stud.
- Install the Rectangular Mirror onto the Mirror Arm and rotate the arm to the desired position. While holding the Mirror Arm in place, tighten the M12 Jam Nut until it is tight against the Mirror Arm.
- If necessary, loosen the Phillips head screws on the back of the Rectangular Mirror to adjust its position. Tighten the screws once the mirror is in the correct position.
Components
- Rectangular Mirror
- (11025.24 – 1)
- (11025.26 – 2)
- Mirror Arm
- (11025.24 – 1)
- (11025.26 – 2)
- M12 Jam Nut
- (11025.24 – 1)
- (11025.26 – 2)
- Mounting Stud
- (11025.24 – 1)
- (11025.26 – 2)
Installation Instructions
- Remove nut on windshield hinge and replace with Mounting Stud.
- WARNING: TORQUE TO 7.5 LB• FT (90 LB • IN)
- Do not use Mirror Arm to position Mirror. May cause vehicle damage!
- Loosely install M12 Jam Nut and Mirror Arm on Mounting Stud.
- Install Rectangular Mirror on Mirror Arm and rotate arm to desired position. While holding Mirror Arm in place, tighten M12 Jam Nut until it is tight against Mirror Arm.
- If necessary, loosen Phillips head screws on back of Rectangular Mirror to adjust. Tighten screws when mirror is in correct position.
Contact
- 460 HORIZON DR. SUITE 400 SUWANEE, GA 30024
- PHONE: 770-614-6101
- FAX: 844-270-0593
- www.Omix-ADA.com
OMIX-ADA® TECHNICAL SUPPORT
- PHONE: M-F 8am – 5pm EST 1-800-449-6649
FOR WARRANTY OR TECH CONCERNS EMAIL: webmaster@omixsupport.com
Copyright © 2018 Omix-Ada®, Inc.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>