STEEL GREEN SG52 Vibration Bracket Instruction Manual
- June 13, 2024
- STEEL GREEN
Table of Contents
STEEL GREEN SG52 Vibration Bracket
Product Information
Item | Part Number | Quantity | Description |
---|---|---|---|
1 | R21-166 | 1 | Vibration Bracket |
2 | R21-166-L | 1 | Vibration Bracket, Left |
3 | HFSSC-3813 | 4 | Hex Bolt, 3/8 X 3/4 |
4 | HFSSC-51675 | 4 | Hex Bolt, 5/16 X 3/4 |
5 | CB-3751SS | 2 | Carriage Bolt, 3/8 X 1 |
6 | HFNCS-516S | 4 | Hex Nut, 5/16 |
Product Usage Instructions
Step 1: Remove the safety shield from the tank support.
Before installing the vibration brackets, remove the safety shield from the
tank support. This will provide access to the installation process.
Step 2: Loosen the tank bolts.
Loosen the four tank bolts on the front and three tank bolts on the rear. Do
not completely remove the bolts. If necessary, remove the rear tire for easier
access to the tank bolts.
Step 3: Install the vibration brackets.
Install the vibration brackets on both the left and right sides. The tanks
should be loose from step two and able to move for proper alignment with the
brackets.
Left Side:
Attach the Vibration Bracket to the left side of the tank using the provided
Hex Bolts, Carriage Bolts, and Hex Nut.
Right Side:
Attach the Vibration Bracket to the right side of the tank using the provided
Hex Bolts, Carriage Bolts, and Hex Nut.
Step 4: Tighten the tank bolts.
Tighten the four tank bolts on the front and three tank bolts on the rear to
secure the vibration brackets in place.
Step 5: Reattach the safety shield.
Finally, reattach the safety shield to the tank support to ensure proper
protection and functioning of the product.
Contact Information
For further assistance or inquiries, please contact Steel Green Mfg. at:
- 824 S State Road 39, Lebanon, IN 46052
- (756)-481-2890
- www.steelgreenmfg.com.
PLEASE NOTE
The supplied vibration brackets MUST be installed or the warranty will be
void.
INSTALLATION INSTRUCTIONS
NOTE: Instructions are the same for both right & left sides.
STEP ONE: Remove the safety shield from the tank support.
STEP TWO:
Loosen the four tank bolts on the front & 3 tank bolts on the rear, do not
completely remove the bolts.
NOTE: If necessary, remove the rear tire for easier access.
VIBRATION BRACKET KIT
ITEM| PART NUMBER| QTY.| DESCRIPTION
1| R21-166| 1| VIBRATION BRACKET
2| R21-166-L| 1| VIBRATION BRACKET, LEFT
3| HFSSC-3813| 4| HEX BOLT, 3/8″ X 3/4″
4| HFSSC-51675| 4| HEX BOLT, 5/16″ X 3/4″
5| CB-3751SS| 2| CARRIAGE BOLT, 3/8 X 1
6| HFNCS-516S| 4| HEX NUT, 5/16
STEP THREE: Install the vibration brackets.
LEFT SIDE
NOTE:
The tanks should be loose from step two and able to move for proper alignment
with the brackets.
STEP FOUR:
Tighten the four tank bolts on the front & 3 tank bolts on the rear.
STEP FIVE:
Reattach the safety shield to the tank support.
Contact Information
- Steel Green Mfg. 824 S State Road 39 Lebanon, IN 46052
- (756)-481-2890
- www.steelgreenmfg.com.
MANUAL PART NO. | MANUAL REV. | DESCRIPTION |
---|---|---|
SGM-013 | B | SG52 VIBRATION BRACKET |
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>