STEEL GREEN SG36 Light Kit Instruction Manual
- June 13, 2024
- STEEL GREEN
Table of Contents
STEEL GREEN SG36 Light Kit
LIGHT KIT
Models: SG36, SG42, SG46, & SG52
LIGHT KIT INSTRUCTIONS
A10009 STANDARD (HOPPER) KIT
PART NUMBER| QTY.| DESCIPTION
E40202| 1| SWITCH, PUMP ROCKER
E40207| 2| LIGHT, OVAL LED 12V
SG-LTS| 1| LED LIGHT HARNESS ALL UNITS
A10008 ALL LIQUID KIT
PART NUMBER| QTY.| DESCIPTION
E40202| 1| SWITCH, PUMP ROCKER
E40207| 2| LIGHT, OVAL LED 12V
SG-LTS| 1| LED LIGHT HARNESS ALL UNITS
R22-075| 1| BRACKET, LED LIGHT
R22-075L| 1| BRACKET, LED LIGHT, LEFT
CB-51634S| 4| CARRIAGE BOLT, 5/16 X 3/4
HFNCS-516S| 4| HEX NUT, 5/16
INSTALLTION INSTRUCTION
STEP ONE: Disconnect the battery, ground first and then power wire.
STEP TWO: Attach the lights to the frame.
Hopper
20 Gallon Tank
NOTE:
- Orientation of left & right brackets.
- The bracket bolts go through the back side of the tank support, so it may be necessary to loosen the tank to access the holes.
35 Gallon Tank
STEP THREE: Connect the plugs on the wiring harness to each light.
STEP FOUR:
- Route the wiring harness neatly along the frame & up to the dash panel.
- Remove the plug in the dash panel “AUX 1” and attach the included rocker switch.
NOTE: Be sure the orientation of the switch matches the “pump switch” (long side faces the driver).
- Connect the “fused end” of the harness to the rocker switch.
STEP FIVE
- Connect the power & ground wires to the battery.
- Reconnect the battery, power wire first along with pump harness power wire and then ground.
Steel Green Mfg. 824 S State Road 39 Lebanon, IN 46052 (765)-481-2890
MANUAL PART NO.| MANUAL REV.| ****
DESCRIPTION
| KIT
PART NO.
---|---|---|---
SGM-028
| ****
B
| ****
SG LIGHT KIT
| A10008 – ALL LIQUID A10009 – HOPPER
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>