belisaire HH-672Y Childrens Car Remote Control Instructions

belisaire HH-672Y Childrens Car Remote Control

Product Information

• Product Type: HH-672Y
• Manufacturer: Henan Honghui Electronic Technology Co., Ltd
• Battery Specification: 1.5V (AAA) * 2 Section
• Operating Voltage: DC2.0-3.6V
• Quiescent DC: 0.5uA
• Modulation Mode: GFSK
• Transmission Frequency: 2.400-2.483GHz
• Frequency Points: 2.419 GHz, 2.425 GHz, 2.445 GHz, 2.450 GHz, 2.470GHz, and 2.474GHz

Product Usage Instructions

1. Load two AAA batteries into the remote control.
2. Simultaneously press the front, rear, and right buttons to enter the fixed frequency testing mode.
3. In the fixed frequency testing mode, LED1 will constantly light up to indicate the default mode (mode 1) with a frequency point of 2.474GHz.
4. To switch modes, release all buttons and press the swing button.
5. Press the swing button once to switch to mode 2: fixed frequency transmission mode with a frequency point of 2.445GHz and LED2 constantly on.
6. Press the swing button six times to switch to mode 7: single carrier mode with a frequency of 2.474GHz and LED3, LED4, and LED5 constantly on.
7. Press the swing button seven times to switch to mode 8: single carrier mode with a frequency of 2.445GHz and LED2, LED3, LED4, and LED5 constantly on.
8. Press the swing button eight times to switch to mode 9: single carrier mode with a frequency of 2.419GHz and LED1, LED2, LED3, LED4, and LED5 constantly on.
9. Press the swing button nine times to return to mode 1: fixed frequency transmission mode with a frequency point of 2.474GHz and LED1 constantly on.
10. Press the swing button ten times to repeat the cycle and return to mode 2.

For any changes or modifications to the equipment, it is advised to consult the dealer or an experienced radio/TV technician for assistance. Additionally, follow the FCC rules and guidelines for proper operation and RF exposure requirements.

Note: The device can be used in portable exposure condition without restriction.

OVERVIEW

Baby carriage remote control product manual 2.4G wireless transmitter remote control Product Type:HH-672Y

Product Configuration:

• Battery Specification :1.5V(AAA)*2
• Section Operating Voltage: DC2.0-3.6V Quiescent DC:0.5uA
• Modulation Mode: GFSK
• Transmission frequency: 2.400-2.483GHz

This remote control shares 6 units at 2.419GHz, 2.425GHz, 2.445GHz, 2.450GHz, 2.470GHz, and 2.474GHz
Frequency point. When conducting fixed frequency testing, select high, medium, and low fre quency points for testing.

Simultaneously press the three buttons “front+rear+right”, load the battery and power it on to enter the fixed frequency testing mode. By default, enter mode 1, fixed frequency Transmission mode, frequency point 2.474GHz, and LED1 constantly lights up for prompt. Afterwards, release all buttons and press the “swing” button to switch modes.

1. Press the “swing” button for the first time to switch to mode 2: fixed frequency transmis-sion mode, with a frequency point of 2.445GHz and LED2 constantly on.

2. Press the “swing” button for the second time to switch to mode 3: fixed frequency transmis-sion mode, with a frequency point of 2.419GHz and LED 3 constantly on.

3. Press the “swing” button for the third time to switch to mode 4: fixed frequency reception mode,with a frequency point of 2.474GHz and LED 4 constantly on.

4. Press the “swing” button for the fourth time to switch to mode 5: fixed frequency reception mode,with a frequency point of 2.445GHz and LED 5 constantly on.

5. Press the “swing” button for the fifth time to switch to mode 6: fixed frequency reception mode, frequency point 2.419GHz, LED4, LED5
   Highlight the prompt.

6. Press the “swing” button for the 6th time to switch to mode 7: single carrier mode,fre-quency 2.474GHz, LED3, LED4, LED5
   Always on prompt.

7. Press the “swing” button for the 7th time to switch to mode 8: single carrier mode,fre-quency 2.445GHz, LED2, LED3, LED4,
   LED 5 is constantly on to prompt.

8. Press the “swing” button for the 8th time to switch to mode 9: single carrier mode,fre-quency 2.419GHz, LED1, LED2, LED3,
   LED 4 and LED 5 are constantly on for prompt.

9. Press the “swing” button for the 9th time to return to mode 1: fixed frequency transmission mode,with a frequency point of 2.474GHz and LED1 constantly on.

10. Press for the 10th time and return to mode 2, repeating the cycle.

FCC STATEMENT

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference, and
2. This device must accept any interference received, including interference that may cause undesired operation.

Warning: Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

RF warning statement:
The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.

NO.20,4/F,Building 1,NO36,Hong song road,High-techzone zhengzhou

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>