enbrighten 56060 Seasons Mini Color-Changing LED Landscape Lights Instruction Manual

: June 13, 2024
: enbrighten

Table of Contents

enbrighten 56060 Seasons Mini Color-Changing LED Landscape Lights
Product Information

enbrighten 56060 Seasons Mini Color-Changing LED Landscape Lights

Product Information

Product Name: Enbrighten Mini Landscape Lights
Product Type: LED Color-Changing Landscape Lights
Manufacturer: Enbrighten
Website: https://byjasco.com/56060i

Product Usage Instructions

Step 1 – INITIAL SETUP:

```
* Carefully unpack the lights from the box and remove any wire ties and plastic bags.
```
- Locate the remote control and install 2 AAA batteries (included).
- Before installing the landscape lights outside, ensure a ground-fault circuit interrupter (GFCI) receptacle is used. Plug the landscape lights into the GFCI receptacle to test if all lights work properly.
- Unplug the landscape lights prior to installation.

Step 2 – INSTALLING LANDSCAPE LIGHTS:
Ground Installation:

Plan the installation by laying out the landscape lighting system. Start with the GFCI receptacle and mounting of the controller. The first light can be placed up to 10ft. away from the controller, and each subsequent light can be placed up to 3ft. from the previous light.
Mount the power supply using either the keyholes or ear-tabs on the back or side. Avoid placing the power supply directly on the ground or where standing water may accumulate.

Ground Mounting:

```
* Place the light directly on the ground or garden bedding.
```
- Using the mounting stake, insert it into the keyhole slot on the bottom of the puck and firmly plant it into soil or mulch. If necessary, loosen the soil or remove debris for easier insertion.

Cord Management:

The lights feature burial-grade cable, which can be concealed by burying it in the soil or covering it with garden bedding.

Flat-Surface Mounting:

```
* Lay out the landscape system according to the desired mounting plan.
```
- Only mount lights to a solid support structure, such as joists, beams, studs, or other sturdy mounting surfaces.
- Use one #6 pan head screw (not included) of appropriate length for the mounting surface to properly install the lights.

USING THE REMOTE:

To power on the lights, press the red ON/OFF button located at the top of the remote. The lights come paired with the remote. Keep the remote indoors when not in use as it is not waterproof.

Explore the following programmable settings via the remote:

Single-Color Select: Find your favorite color on the remote’s color pad and push that button to set all lights to the same color.

Read the instructions or watch the easy-to-follow video.
Scan the QR code or visit https://byjasco.com/56060i

Best Practices for Installation

Install power supply/receiver a minimum of 18in. above the ground to ensure optimal range on the remote control.
Note that placing the power supply/receiver directly on the ground can severely diminish the remote control range.
Do not mount the power supply/receiver behind large objects such as posts, walls, large boulders, or other items that may interfere with the signal from the remote control. Also, avoid mounting the power supply/receiver on or near metal walls or other large metal objects. Doing so can reduce the remote control’s operation distance.
Do not pull cords tight as it may damage electrical connections. Leave a small amount of slack on cords to remove strain on connections.
Longest remote control operating distances are obtained when the power supply/receiver is in line of sight of the remote control. Operating the remote control inside of houses and other buildings will reduce the remote control’s operation distance

Congratulations on your recent purchase of Enbrighten Mini Landscape Lights. Enbrighten Mini Landscape Lights are designed to provide lighting for life.
IMPORTANT : Before installation, please read all the warning statements included at the bottom of these instructions.
To ensure proper installation, please follow each step below.

Step 1 – INITIAL SETUP

Carefully unpack your lights from the box. Remove and dispose of the wire ties and plastic bag (see warning on bottom).
Locate remote control and install 2 AAA batteries (included).
When installing landscape lights outside, a ground-fault circuit interrupter (GFCI) receptacle must be used. Before installing, plug the landscape lights into the GFCI receptacle to ensure all lights work properly.
IMPORTANT : Unplug the landscape lights prior to installation.

Step 2 – INSTALLING LANDSCAPE LIGHTS
Each landscape light is designed for mounting with the included stakes (one per light) or for use on a flat surface (see below instructions).

Ground Installation

Carefully plan your installation by laying out the landscape lighting system.
Start with the GFCI receptacle and mounting of the controller. Placement for the first light can be up to 10ft. away from the controller. Each subsequent light can be placed up to 3ft. from the previous light.
Mount the power supply using either the keyholes on the back or ear-tabs on the side (see Figure A). Do not lay the power supply directly on the ground or where standing water may accumulate (see Figure B).

Ground Mounting

a) Place light directly on the ground or garden bedding.
b) Using the mounting stake: insert the stake into either keyhole slot on the bottom of the puck and firmly plant it into soil or mulch. NOTE: If the stake requires more than a firm push, loosen the soil or remove debris.

Cord Management

Your Enbrighten Mini Landscape Lights feature burial-grade cable. This allows you to conceal excess cable by directly burying it in the soil or covering it with garden bedding.

Flat-Surface Mounting

Lay out the landscape system in the manner in which you plan to mount it. Only mount lights to a solid support structure, such as joists, beams, studs or other sturdy mounting surfaces. Use one #6 pan head screw (not included) of an appropriate length for the mounting surface to properly install the lights.

USING THE REMOTE

To power on your lights, press the red ON/OFF button located at the top of the remote. Your Enbrighten Mini Landscape Lights come paired with your remote.

NOTE :

Keep the remote indoors when not being used. Remote is not waterproof.
Now that your lights are installed and powered on, take time to explore the following settings that are programmable via your remote.

Single-Color Select
Find your favorite color on the remote’s color pad and simply push that button to set all of the lights the same color.
NOTE : Within this feature, you can also press the dimming button to adjust from 10 light levels. The dimming option is only available for single- and dual-color selection.

Dual-Color Select

a) Press Color 1, then select a color from the color pad to set the color of every other light starting with the first light.
b) Press Color 2, then select a color from the color pad to set the color of every other light starting with the second light.
c) During the selection feature, press the dimming button to choose one of 10 light levels.

White Select
By pressing the white button, cycle through white selections — 2200K, 2700K and 5000K.

Strobe
By pressing the strobe button, the lights will strobe through all of the colors in a random pattern.

Fade
By pressing the fade button, the lights will fade in and out through all of the colors in a random pattern.

Modes
Press the modes button repeatedly to cycle through the following preset modes:

Twinkle
Multi-Fade
Christmas
St. Patrick’s Day
Red, White, and Blue
Fall
Spring
Multi-Colors

NOTE : Your landscape lights will automatically remember the last customized settings and turn back on in the same mode and color scheme.

Timer Selection Feature

By pressing the 2-hour timer button, you will activate a two-hour countdown until the lights turn off.
By pressing the 4-hour timer button, you will activate a four-hour countdown until the lights turn off.

Pair Your Remote with Additional Lights
Your remote can be paired to additional sets of Enbrighten Mini Landscape Lights and Enbrighten Seasons Café Lights. Follow the instructions below.

Plug in (or supply power) to the lights, and within 8 seconds press and hold the ON/OFF button. The lights will turn white, blink once, and remain white. Your remote and lights are now paired.
- a) Please note, you can pair a remote with as many Enbrighten Seasons Lights as you desire
- b) Multiple strings can be paired at one time with one remote, by supplying power to multiple strings at once, then pressing and holding the ON/OFF button within 8 seconds of power on, per the above instructions.
Lights can be paired with up to 8 remotes. If you wish to remove a remote control from the memory of a light (unpair) follow the below instructions:
- a) Plug in (or supply power) to the lights, and within 8 seconds, press and hold the yellow button (in the bottom left corner). The lights will turn white, blink twice, and remain white. Your remote and lights are now unpaired.
- b) Multiple lights can be unpaired at one time from one remote by supplying power to multiple lights at once, then pressing and holding the yellow button within 8 seconds of powering on.

Electrical Ratings Input: 120V, 50/60Hz

Model No. Input watt, Max. Location Use

ENB / 2 / 32 / 6 /18 / 2| 5W|
ENB / 2 / 44 / 12 / 18 / 2| 10W|

WET

ENB / 2 / 54 / 15 / 22 / 2| 13W
ENB / 2 / 68 / 24 / 18 / 2| 22W
ENB / 2 / 92 / 36 / 18 / 2| 32W

Important — please read:
Refer to the manual or visit www.byjasco.com for limitations and restrictions on warranties and product registration information.

WARNING : When using outdoor as portable luminaires, basic safety precautions should always be followed to reduce the risk of fire, electrical shock, and personal injury, including the following:
Ground-fault circuit Interrupter (GFCI) protection is to be provided on the circuit(s) or outlet(s) to be used for the wet-location portable luminaire. Receptacles are available having built-in GFCI protection and are able to be used for this measure of safety.
WARNING : Keep these bags away from babies and children. Do not use it in cribs, beds, carriages, or playpens. The thin film may cling to the nose and mouth and
prevent breathing.

WARRANTY INFORMATION

This Jasco product is warranted for three (3) years with a limited-lifetime replacement warranty on Enbrighten LED light source only.

MADE IN THAILAND
Distributed by Jasco Products Company LLC, 10 E. Memorial Rd., Oklahoma City, OK 73114.
This Jasco product comes with a 3-year limited warranty.
Visit www.byjasco.com for warranty details.

Questions?
Contact our U.S.-based Consumer Care at 1-800-654-8483 between 7 AM-8 PM, M-F, Central Time.
Patents pending | www.enbrightenme.com WARNING
RISK OF ELECTRIC SHOCK

OUTLETS USED FOR POWERING LANDSCAPE LIGHTS SHALL COMPLY WITH ALL NATIONAL AND LOCAL ELECTRICAL CODES. CONSULT LOCAL ELECTRICIAN IF UNSURE OF COMPLIANCE REQUIREMENTS.
FOR USE ONLY ON GFCI-PROTECTED CIRCUITS.
DO NOT SUBMERSE.
DO NOT USE AROUND AQUARIUMS.
LANDSCAPE LIGHTS ARE A WET-LOCATION PRODUCT AND HAVE NO SERVICEABLE PARTS.
DO NOT USE WITH EXTENSION CORD NEAR WATER OR WHERE WATER MAY ACCUMULATE.
KEEP LAMPS AT LEAST 16 FEET FROM POOLS AND SPAS.
KEEP PLUGS AND RECEPTACLES DRY.
AVOID DAMAGE TO THE CORDS AND LAMP ASSEMBLIES DURING INSTALLATION. PERIODICALLY INSPECT THE LANDSCAPE LIGHTS FOR PHYSICAL DAMAGE OR OTHER DAMAGE CAUSED BY OUTDOOR EXPOSURE TO THE ELEMENTS.
REPLACE ANY DAMAGED LANDSCAPE LIGHTS.
DO NOT INSTALL IN LOCATIONS WHERE LANDSCAPE LIGHTS CAN BE STEPPED ON.
ENSURE LANDSCAPE LIGHTS ARE UNPLUGGED FROM POWER DURING INSTALLATION.
CHILDREN SHOULD NOT BE ALLOWED TO PLAY WITH LANDSCAPE LIGHTS.
UL RECOMMENDS TESTING GFCI CIRCUITS AND RECEPTACLES EVERY MONTH TO ENSURE PROPER OPERATION.

RISK OF FIRE

LANDSCAPE LIGHTS ARE DESIGNED TO BE MOUNTED WITH THEIR INDIVIDUAL KEYHOLE MOUNTING FEATURE, DO NOT MOUNT LANDSCAPE LIGHTS BY USING THE MAIN ELECTRICAL CORD OR THE INDIVIDUAL DROP CORDS.
NOT INTENDED FOR INSTALLATION IN CEILINGS, SOFFITS, CABINETS, ATTICS OR OTHER ENCLOSED SPACES.

Simplify your enbrighten® experience by automating on and off light times

We recommend the following models, available at select retailers or at www.enbrightenme.com

Heavy duty and weather resistant with two grounded outlets. Fully customizable time settings.
Easy-to-program custom settings presets, and countdown options. The on/off switch opens to reveal program buttons.
Easy-to-program custom settings presets, and countdown options. Self-adjusts to sunset/sunrise times throughout the year. On/off switch opens to reveal program buttons.
Schedule and control outdoor or indoor lighting from any mobile or voice-controlled device.
For additional stakes and accessories, visit www.enbrightenme.com or call 1-800-654-8483

Multiple lengths and styles are available now at www.enbrightenme.com