osmo Floor Brushes Application Instructions
- June 13, 2024
- OSMO
Table of Contents
osmo Floor Brushes Application
Product Information
Osmo Floor Brushes
The Osmo Floor Brushes are specifically designed for applying the Osmo Polyx-
Oil finish onto wooden floors. These brushes ensure a smooth and even
application, allowing you to achieve professional results.
The bristles of the brush are made from high-quality materials that are
durable and resistant to wear. The brush handle is ergonomically designed for
comfortable grip and control during application.
Product Usage Instructions
- Before starting, make sure to stir the Osmo Polyx-Oil finish well to ensure proper consistency.
- Pour the Osmo Polyx-Oil finish into a tray.
- Dip the Osmo Floor Brush approximately 1cm into the product.
- Start brushing the Osmo Polyx-Oil very thinly and evenly onto the wood floor, following the grain, using a back-and-forth scrubbing motion.
- Take care to avoid brush-stops and excessive areas of product accumulation.
- After finishing the application, store the brush in a plastic bag overnight to prevent drying.
- To clean the brush, use the Osmo Brush Cleaner and Thinner 8000.
For more detailed information on product usage, please refer to the Osmo FloorBrushes product page.
Osmo Floor Brushes Application Instructions
- Stir the Osmo Polyx-Oil finish well and pour into a tray.
- Take the Osmo Floor Brush and dip approximately 1cm into product.
- Brush the Osmo Polyx-Oil very thinly and evenly onto the wood floor following the grain in a back-and-forth scrubbing motion.
- Take care to avoid brush-stops, excessive areas of product
- Store the brush in a plastic bag overnight to prevent drying
- Clean with Osmo Brush Cleaner and Thinner 8000
https://osmo.ca/product/floor-brushes/
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>