DONGGUAN TOGRAN ELECTRONICS TECHNOLOGY CO LTD TM233G Wireless Mouse Dongle User Guide

DONGGUAN TOGRAN ELECTRONICS TECHNOLOGY CO LTD TM233G Wireless

Product Information

Specifications

• Compliance: Part 15 of the FCC Rules
• RF Exposure: Meets general RF exposure requirements
• Licence: Contains licence-exempt transmitter(s)/receiver(s)
• Regulations: Complies with Innovation, Science and Economic Development Canada’s licence-exempt RSS(s)

Product Usage Instructions

When using the Dongle device, please adhere to the following guidelines:

FCC Warning
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference.
2. This device must accept any interference received, including interference that may cause undesired operation.

For optimal performance and compliance:

• Reorient or relocate the receiving antenna if necessary.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for assistance with any changes or modifications.

The device has been evaluated to meet general RF exposure requirements. It can be used in portable exposure conditions without restriction.

FAQ

• Q: What should I do if I experience interference while using the Dongle?
  A: If you experience interference, try reorienting the antenna, increasing the separation between devices, or consult a professional for further assistance.

• Q: Can I make modifications to the Dongle device?
  A: Any changes or modifications not expressly approved may void your authority to operate the equipment. Consult with a professional for guidance on modifications.

Wireless Mouse
Dongle User’s Guide

CAUTION: To use this product properly, please read the user’s guide before installing.

Specifications

• Number of Buttons: 3
• Operating Frequency: 2.4GHz
• DPI Levels: 1200
• Operating Range: <33ft(10m)
• Operating Current: 14mA
• Standby Current: 0.5mA
• Battery: 1 x AA battery
• Weight 44 $ 5g
• Dimensions: 99.5 × 59. 7 x 38.5 mm

Package Contents

• 1x User Manual
• 1x Wireless Mouse
• 1x USB Receiver

Product Overview

1. Left Button
2. Right Button
3. Vertical Sliding Wheel
4. USB Receiver (inside the battery slot)

Operation Methods

1. Step 1 : Open the battery cover
2. Step 2 : Take out the USB receiver
3. Step 3 : Insert one AA battery into the battery slot. Put battery compartment cover back on.
4. Step 4 : Plug the USB receiver into the USB port of your device.

Note: The USB receiver can be unplugged from the USB port and stored in the battery slot while not in use.”

Power Management

Power Savings Mode: The mouse will automatically go to sleep after 10 minutes of inactivity. Press any button and wait for 3 seconds to reactivate it.

Replacing Batteries
Lift the battery compartment cover up. Replace the spent battery with one new AA battery and put the cover back on (Battery not included). Note: Make sure that the positive+) and negative(-) terminals are on the correct sides.

Troubleshooting

If you cannot connect the mouse to your device, or if the mouse is not working, please try the following:

1. Check to see if the USB receiver is properly connected to the USB port of your device.
2. Insert one new AA battery into the battery slot. Press and hold the vertical sliding wheel and the right button together for 3-5 seconds. Generally, the mouse will work when it’s successfully paired with the 1 USB receiver.

Note: The mouse should be within 39 inches (1 meter) away from the USB receiver during pairing.

Important Safeguards and Precautions

1. SAVE THESE INSTRUCTIONS-They contain essential safety and operating instructions.
2. Please remove the battery when the mouse is not in use for a long period of time.
3. For indoor use only. Do not expose the mouse to direct sunlight or wet conditions.
4. Do not use the mouse if equipment is damaged
5. Do not disassemble the product. Disassembly can result in safety hazards. 6. Do not throw or shake the product.

100% Satisfaction Guarantee
If you are not completely satisfied with the quality of any Staples® Brands products, simply return it within the applicable return period along with receipt or original package for an exchange or refund. See Staples Returns Policy for details.

Support 1-800-425-0049

FCC Warning
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference, and
2. This device must accept any interference received, including interference that may cause undesired operation.

Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction. This device contains licence-exempt transmitters)/receivers) that comply with Innovation, Science and Economic Development Canada’s licence-exempt RSS(s). Operation is subject to the following two conditions:

1. This device may not cause interference.
2. This device must accept any interference, including interference that may cause undesired operation of the device.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>