OSMO GF22 GPS Tracker User Manual
- June 12, 2024
- OSMO
Table of Contents
OSMO GF22 GPS Tracker
Product Information
The product is a GPS tracker that requires a Nano SIM card compatible with a 2G GSM network for operation. The tracker is designed for personal protection and should be used in accordance with the national laws and regulations of the respective country.
The device has LED lights to indicate various statuses. The red light indicates the battery level, with slow blinking indicating normal battery level and fast blinking indicating low battery. The yellow light indicates GSM network connectivity, with slow blinking indicating normal network connection and fast blinking indicating searching for a signal. The blue light indicates GPS connectivity, with slow blinking indicating normal GPS connection and fast blinking indicating searching for GPS without a SIM card.
The device can be turned on by inserting the Nano SIM card into the SIM card slot and long-pressing the power button (black button next to the SIM card slot). SOS functionality can be activated by long-pressing the power button for 3 seconds in power on mode. The device can be turned off by long-pressing the power button for 10 seconds (with SIM card) or 3 seconds (without SIM card). To login to the account associated with the device, use the IMEI number (15 digits) found on the device’s sticker as the login ID. The password is set as 123456.
Various actions can be requested via SMS commands. These include applying for an IMEI number, resetting the default password, restoring factory settings, setting recording intervals, controlling LED lights, configuring APN settings, remote restarting, enabling/disabling vibration alert, editing IP address, and setting heart time package.
If the yellow LED light remains on, it may indicate an issue with the SIM card connection. Ensure that a 2G compatible SIM card is inserted properly and firmly. If the issue persists, try using a new SIM card. To check if the tracker communication is connected, send an SMS message with the text “imei#” from your mobile phone to the tracker’s number. You will receive an SMS reply containing the IMEI number of the tracker.
To set up voice monitoring, use the following method: Open the APP, go to Dial Back, enter your mobile number, and save. The tracker will call your phone, and you can answer or reject the call. Once successfully set up, your phone can directly call the tracker, and it will automatically answer without needing to set it up again. To obtain location coordinates via SMS, send an SMS command “999” to the tracker. You will receive a link to Google Maps, which you can open to view the location.
Product Usage Instructions
- Prepare a Nano SIM card compatible with 2G GSM network. If it is a new SIM card, wait for 24 hours for proper activation and turn off the PIN code of the SIM card.
- Activate the SIM card’s GPRS service and caller ID.
- Insert the Nano SIM card into the tracker’s SIM card slot with the correct angle orientation.
- To turn on the device, long-press the power button (black button next to the SIM card slot) for 3 seconds.
- To activate SOS functionality, long-press the power button for 3 seconds in power on mode.
- To turn off the device with a SIM card inserted, long-press the power button for 10 seconds. To turn off the device without a SIM card, long-press the power button for 3 seconds.
- To login to the account, use the IMEI number (15 digits) found on the device’s sticker as the login ID. The password is set as 123456.
- Use the LED lights to monitor battery level (red), GSM network connectivity (yellow), and GPS connectivity (blue).
- Send SMS commands to request various actions such as applying for an IMEI number, resetting the default password, restoring factory settings, setting recording intervals, controlling LED lights, configuring APN settings, remote restarting, enabling/disabling vibration alert, editing IP address, and setting heart time package.
- If the yellow LED light remains on, ensure that the SIM card is inserted properly and firmly. If the issue persists, try using a new SIM card.
- To check if the tracker communication is connected, send an SMS message with the text “imei#” to the tracker’s number. You will receive an SMS reply containing the IMEI number of the tracker.
- To set up voice monitoring, open the APP, go to Dial Back, enter your mobile number, and save. The tracker will call your phone for setup confirmation.
- To obtain location coordinates via SMS, send an SMS command “999” to the tracker. You will receive a link to Google Maps to view the location.
Preparation before use
- Prepare a Nano SIM card compatible with 2G GSM network. If it is a new SIM card, it needs 24 hours to activate properly; in addition, you need to turn off the PIN code of the SIM card.
- Activate the SIM card GPRS service and caller ID
Turn on
Insert the nano SIM card into the tracker’s SIM card slot (the angle orientation for the SIM card), the power button is the black button next to the SIM card slot.
- Turn On: Long press for 3 seconds
- SOS: Long press for 3 seconds in power on mode
- Turn Off: Long press for 10 seconds (with SIM card)
- Turn Off: Long press for 3 seconds (without sim card)
Login to the account
- Each device has a sticker with 15 digits – the IMEI number, a login ID.
- APP application: 365GPS:
- Login ID: IMEI-Number (15 digits)
- Password: 123456
Led-Lights
- Red: Battery, slowly normal, quickly discharged. It will disappear once charged.
- Yellow: GSM, slow normal, fast search signal
- Blue: GPS, slow normal, fast search, clear gps without sim
SMS Commands
- 000 # Number # Number # Number # (Connection of three phones)
- 111 TF card voice recording 10 minutes break
- 222 TF card voice recording 10 minutes pause, automatic recording 10 minutes again when a voice is detected.
- 333 voice controlled callback to connection numbers
- 444 delete all memory content
- 555 turn off all functions
- 666 vibration alarm SMS to the link number
- 777 Vibration alert for calls to extensions
- 888 play the recording in memory — requires a speaker
- 999 Vibration alert for calls to extensions
Action request via SMS
- Apply for an IMEl number: “imei#”
- Reset default password: “pwrst”
- Restore factory settings: “1122”
- Set recording interval: “time#minute” (minute range 1-120 minutes);
- “md#second” (second range 10-60 seconds)
- Open/Close LED: “LED#on, LED#off”
- APN settings: “APN#parameter#account#password#”
- Remote restart: “sysrst”
- Vibration alert: “6666#on# / 6666#off#
- IEdit IP address: “domain # IP # Port ID #”
- Heart time package: heartbeat#No.#(no.=second)
Legal notice: This product is only used for personal protection. Please note the national laws and regulations of the respective country.
PARAMETERS AND SPECIFICATIONS
- Model: Osmo GPS Tracker
- Material: Plastic
- Size: 2,6×1,3×4,3cm
- Battery: Integrated rechargeable 5V 350mAh
- Color: Black
- Power input: 5V
- Communication frequency: 850/900/1800 / 1900MHz
- Positioning mode: WIFI +
- Working temperature LBS + GPS: -20-85 ° C
FAQ
HOW TO USE GPS TRACKER?
- Prepare a nano SIM card that is compatible with 2G network and opens GPRS service (very important because the GPS tracker only works with 2G). If it is a new SIM card, it must be properly activated for 24 hours; it is also necessary to delete the PIN code of the SIM card – it is very important that the GPRS Internet service of the SIM card is turned on, as it is necessary to use the location data of the Internet upload to our server .
- Insert the nano sim card into the tracker slot (the angle orientation for the sim card)
- Press the power button for 3 seconds to turn on the tracker, wait, the yellow LED will flash slowly
- Download our 365GPS app, Login ID: 15-digit IMEI on the tracker, Password: 123456 immel helps to get GPS satellite signal and exact position. e) The open air test helps to get the GPS satellite signal and exact position.
Why is the yellow (orange) LED still on?
Firstly – does your SIM card support 2G GSM network? And is there 2G network service in your home now? Only a 2G compatible SIM card works in the tracker, that’s the most important thing! 2G SIM card – Yes! If the yellow light is still on, it means you haven’t connected the sim card properly and firmly. Remove and reinsert them. Or try a new SIM card. If the yellow LED is flashing, this is normal and everything should be fine.
Turn on the device, all lights flash, APP display: offline?
- The Chinese address is the address where this GPS tracker was tested before shipping, don’t worry about the Chinese address showing – it means the tracker’s quality test is working properly.
- If your SIM card is compatible with 2G, the yellow LED will flash quickly
- You didn’t remove the PIN code of your sim card, insert the sim card into your mobile phone, turn off the PIN code and insert the sim card back into the tracker.
- If you have already turned off the PIN code, the yellow LED is still flashing quickly – it is a problem with the APN setting, the APN simulator operator is not in our server list, it is an SMS command to set the APN set: APN: “APN # parameter # account # password # ” (if there is no account password, it is not necessary to fill it in.) (For example, there is a Dutch mobile APN: KPNMobile, text message: APN # KPNMobile # ) Write this message: Parameter APN # to the sim number in the tracker will reply you a message: set successfully. Please try again.
How do I know the tracker communication is connected?
- The text of this SMS message: imei #, sent from your mobile phone to the number in the tracker You will receive an SMS reply: 359339075000 *** (15-digit imei number)
Note: Send SMS to the number of the sim card and omit the country code: +39 / +44 / +49 …, omit only the phone number
How is voice monitoring number set and how does it work?
- Method 1: APP – Dial Back – Pickup Tel, enter your mobile number. The tracker will call your phone, you can answer or reject the call. – This means the setup was successful. Next time: Your phone will call the tracker directly, it will answer automatically, you don’t need to set it up again.
- Method 2: Send SMS command “Monitor # your mobile number #” to the SIM card phone number in the GPS tracker.
How to use a voice recorder?
- Method 1: APP Voice Recorder: Voice – click the blue icon, recording 15 seconds recorder.
- Method 2: TF Card Voice Recorder – First: Send 000# to the phone number, it will bind your phone number to the device. SMS: 111 – recording pause 10 minutes 222 – voice recording pause 10 minutes, automatic recording 10 minutes again, when each voice, every 10 minutes, cancel sending SMS 555
How to use SMS coordinates/tracking by SMS not APP?
SMS coordinates SMS command: 999 then you will get a link to the google map, open the link and get the location.
- SMS coordinates only work when the tracker is on and connected to the server. If the device is turned off or does not open the GPRS service or the credit is used up, the SMS coordinates cannot be received successfully.
How to manage many 365GPS devices in one account/account group ID Create Admin?
- Click the plus button in the top left corner
- Create a new Login ID (6-12 characters), enter the IMEI and password of the second device you want to add to a group
- Unregister the first device and register the APP again: Login ID: use the ID you created Password: same as for the first device (default is 123456)
- Click the middle head icon to let it You will see a list of all devices in this group ID.
Scan
If you want to read this user manual in a different language, go to osmousermanual.com
Have any questions or need further assistance?
- Send us an email at [email protected] and we will be happy to help!