JOHN LEWIS PARTNERS 82011818 Fillable 9kg Parasol Base Instructions
- June 12, 2024
- John Lewis Partners
Table of Contents
Fillable 9kg Parasol Base
Stock number: 82011818
L38cm W38cm H7cm
82011818 Fillable 9kg Parasol Base
Thank you for purchasing the John Lewis and Partners Fillable 9kg Parasol
Base. Please make sure you read the instructions and warnings carefully before
proceeding to ensure safe and satisfactory operation of this product.
At John Lewis and Partners we are committed to making great products, from our
in-house design team to our buyers, we work together to bring great design to
life.
Our expert Product Technologists work collaboratively with our buyers and
suppliers to assure the legality, safety and quality of the product we sell.
We are all committed to designing and developing products to the highest
industry standard.
We hope you are happy with your product and welcome any feedback or comments
you may have.
The John Lewis and Partners team.
No Tools Required
Time to assemble 5 minutes
People required to assemble
Important safety information
Warnings
△ The product is HEAVY; it should only be assembled near point of use.
△ Keep small parts out of reach of children.
△ Ensure the product is fully assembled as illustrated before use.
Check the pack and make sure you have all the parts listed.
Do not stand on the product.
Your fillable base
| Ref | Description | Dimensions | Qty |
|---|---|---|---|
| 1 | Fillable base | L38cm W38cm H7cm | 1 |
| 2 | Cap | 1 | |
| 3 | Pole | 1 | |
| 4 | Adapter | D38mm | 1 |
| 5 | Adapter | D32mm | 1 |
Internal dimensions
Stock number: 82011818
Parasol overall size: L38cm W38cm H7cm
Fixtures and fittings
None
Product assembly
Fillable 9kg Parasol Base
82011818
Step 1
Parts, fittings and tools
Remove the cap on the top of base.
Slowly fill the base with water or sand.
Sand is heavier than water and recommend using sand. Warnings:
Remove water before freezing temperatures this could damage base.
Don’t stand or jump on base.
In high winds we recommend taking umbrella down to avoid it tipping over.
When filled with water or sand base is heavy, avoid moving and dropping.
Step 2
Parts, fittings, and tools
Attach Pole (3) to Base (1)
For 38mm poles, insert the larger adapter for the base (4)
For 32mm poles, insert the smaller adapter (5) into the larger adapter (4)
then insert together into the pole.
Care guide
Care and maintenance
This product is made from plastic and is suitable for outdoor use.
We recommend that you clean your base at the beginning and end of the season.
To clean the base, remove all dirt using mild soap and water. Never use
abrasive chemicals or cleaning agents. Rinse thoroughly and allow to dry.
Safety instructions
This parasol base has been designed for domestic use only.
Parasol bases can be dangerous if incorrectly installed or assembled, it
should be carried out by a competent person.
No liability will be accepted for damage or injury caused by incorrectly
installed or assembled parasol bases.
Parasols should not be used in high winds or during inclement weather.
This parasol base must always be filled to the top.
Never drag a parasol when moving it, always lift it.
Periodically check all fixings to ensure none have come loose and re-tighten
where necessary.
Ensure that the parasol base is always on a solid and level surface at all
times.
Retain these instructions for future reference.
Your feedback is very important to us, and we would love to hear your comments
on your new furniture. Please visit our website to leave a review. Thank you.
John Lewis Partnership
171 Victoria Street
London SW1E5NN
Johnlewis.com
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>