WALFRONT WZ3605E Digital Control Power Supply User Guide

: June 13, 2024
: WALFRONT

Table of Contents

HD Color screen display
Functional features
Output multiple protections
Professional equipment calibration
Multi interface display
Display and operation of main interface
Statistical interface display and operation
Voltage current curve interface
System setting interface
Data group setting interface
Product information
Product mix
Product Size
Opening Size
Product packaging
Paper shell independent packaging
Read User Manual Online (PDF format)
Download This Manual (PDF format)

WALFRONT WZ3605E Digital Control Power Supply User Guide

There is no communication version of this product
This product is adjustable power supply of DC voltage rise and fall. Please read the instructions before use. Do not con- nect AC or exceed the allowable input voltage range.

HD Color screen display

It adopts 1.44 inch high-definition color screen display and multi screen display. The output voltage is adjustable from 0.6 V to 36.00V, and the output current is adjustable from 0 to 5.000A. Small size, high precision, widely used.
HD Color screen display

Functional features

Input reverse connection protection
10 data storage
CV/CC
Over voltage protection
Over power protection
Over current protection

Output multiple protections

Professional equipment calibration

Using high precision sampling chip, low tempeature drift ref- erence power supply and advanced over sampling and filterin- gAlgorithm, optimize calibration process, hang up aging test,et- c., to ensure the accuracy and stability of the productSet!
Professional equipment calibration

Multi interface display

Display and operation of main interface

Output on/off setting

In the off state, short press ),turn on output, shour press in open state, close output.

Set output voltage/current

In the main interface, short press VI, enter the voltage setting state (reverse red display), press encoder, move and cycle the selected number one by one, rotate the rotary encoder to change the number to be large small.after adjustment, press VIA save the current data and exit.30 seconds no operation will be automat- icsign out. The passage of the same principle (A set the current quickly.

M1/M2 Data group quick call out

In the main interface, long press (VIA, data group 1 can be called out, and the lower part of the screen is displayed the column displays the data group number that has been called up. under data group 1, long press VA to return data group MO.Same as long press AM3-M9 data group in the required number call up and set according to group setting interface. Please refer to the corresponding interface setting instructions.

System zero out

In the main interface, there is a small current. Long press the rotary encoder to calibrate the output small current drift.

Interface switching

No settings are selected, and the rotary encoder switches menus.

Statistical interface display and operation

Statistics run/pause

In the statistics interface, in the running state, short press the rotary encoder to pause the statistics. In pause, press the rotary encoder for a short time under the state, and the opera- tion will be counted.

Clear statistics

In the statistics interface, press and hold the rotary encoder to clear the statistical information.

Voltage current curve interface

Each grid represents: 0.1V/0.01A Sampling time: 1S

System setting interface

Enter system settings

Long press rotary encoder or short press (A) to enter system setting. The selected item will be displayed in reverse, short press VIA or A/V switch the selected entry, and then rotate the encoder to adjust the set-
ting. Set up after setting, press and hold the rotary encoder to save the exit system settings.

Data group setting interface

M-PRE: 1.Select data group MO-M9; 2. Set call out output.
U-SET: Set the output voltage value.
I-SET: Set the output current value.
S-OVP: Set the overvoltage protection value.
S-OCP: Set the overcurrent protection value.
S-OPP: Set the over power protection value.
S-OHP: Set the maximum run time (parameter is 0,closed by default)
S-OAP: Set the maximum capacity (parameter is 0,closed by default)
S-OWH: Set the maximum energy(parameter is 0,off by de- fault)

Data group setting method

Long press rotary encoder or short press (A to enter data group setting. The selected item will be reversed, short press VIA or A to switch the selected items, and then rotate the encoder to adjust the settingsSet.After setting, press and hold the rotary encoder to save and exit the set- ting.

Product information

Model:WZ3605E	Display:1.44 inch Color screen
Input voltage range:6 00-36.00V	Input voltage resolution:0.1V
Output voltage range:0.60-36.00V	Output voltage resolution:0.01V
Output current range:0-5.000A	Output current resolution:0.001A
Output power range:0-80.000W	Intput voltage accuracy:±(1%+5)
Output voltage accuracy:±(0.3%+3)	Output current accuracy:±(0.5%+5)
Output ripple:150mV	Temperature 101C-60t
Time range:0-10000 hour(unit:S)	Energy range:0-99999.999WH
Capacity range:0-99999.999AH	Capacity energy error:±2%
Screen brightness:0-6 7 levels	Product Size:794348mm