VOLLRATH T38730 Cafeteria Breath Guard Instruction Manual

June 1, 2024
VOLLRATH

VOLLRATH T38730 Cafeteria Breath Guard

These instructions cover the installation of the one-piece Cafeteria Breath Guard and the three-piece Cafeteria Breath Guard.

Installation

One Piece Breath Guard Installation

Some units are shipped with a breath guard not installed. To install the breath guard follow these steps:

NOTE:

Use caution when tightening the cap nuts. Overtightening may cause the plastic to crack.

VOLLRATH-T38730-Cafeteria-Breath-Guard-fig \(1\)

  1. Install the breath guard uprights (A) to the studs (B) securing with cap nuts (C) as shown. See Figure 1. Repeat for all four uprights.
  2. Install the breath guard support tube (D) between the uprights (A) securing with cap nuts (C) as shown. Repeat on the other side.
  3. Install the one-piece breath guard (E) securing with screws (F) and cap nuts (C) as shown. Repeat for all four mounting locations.
  4. Install the side breath protector (G) to the support tube (D) securing it with cap nuts (C) as shown. Repeat on the other side

Three-Piece Breath Guard Installation

Some units are shipped with a breath guard not installed. To install the breath guard follow these steps:
NOTE:
Use caution when tightening the cap nuts. Overtightening may cause the plastic to crack.

  1. Install the breath guard uprights (A) to the studs (B) securing with cap nuts (C) as shown. See Figures 1 and 2. Repeat for all four uprights.
  2. Install the breath guard support tube (D) between the uprights (A) securing with cap nuts (C) as shown. Repeat on the other side.
  3. Install the side breath guards (E) securing with screws (F) and cap nuts (C) as shown. Repeat for all mounting locations.
  4. Install the side shield (G) to the support tube (D) securing with cap nuts (C) as shown. Repeat on the other side.
  5. Install the support bar and stud assembly (H) to the side breath guards (E). Repeat for all mounting locations.
  6. Install the top breath guard (I) to the support bar and stud assembly (H) securing with cap nuts (C). Repeat for all mounting locations.

The Vollrath Company, L.L.C.

  • 1236 North 18th Street Sheboygan, WI 53081-3201 U.S.A.
  • Main Tel : 800.628.0830
  • Service Tel : 800.628.0832
  • FAX: 800.752.5620
  • Vollrath of Canada, Co.
  • Tel: 800.695.8560
  • FAX: 800.752.5620

© 2010 The Vollrath Company, L.L.C.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

VOLLRATH User Manuals

Related Manuals