AcuRite 75100C Digital Clock Instruction Manual
- June 7, 2024
- Acurite
Table of Contents
Instruction Manual
Digital Clock
model 75100C
Questions? Contact Customer Support at 877-221-1252 or visit www.AcuRite.com.
SAVE THIS MANUAL FOR FUTURE REFERENCE.
Congratulations on your new AcuRite product. To ensure the best possible product performance, please read this manual in its entirety and retain it for future reference.
Unpacking Instructions
Remove the protective film that is applied to the LED screen prior to using this product. Locate the tab and peel it off to remove it.
Package Contents
- Digital Clock
- Power Adapter
- Instruction Manual
IMPORTANT
PRODUCT REGISTRATION
Register online
to receive 1 year
warranty protection
www.AcuRite.com| PRODUCT MUST BE REGISTERED TO
RECEIVE WARRANTY SERVICE
Archived Products
►Register a Product
---|---
Features & Benefits
1. Clock
2. AM/PM Indicator
3. Indoor Temperature
4. Day of The Week
5. Date
6. Integrated Hang Holes For easy wall mounting.
7. Fold-Out Stand
8. Battery Compartment Cover| 9. Power Adapter
10. Built-In Cord StorageSecures excess cord.
11. Battery Compartment
12. Button For setup preferences.
13. SET Button For setup preferences.
14. Button For setup preferences.
---|---
SETUP
Install or Replace Backup Batteries
- Remove the battery compartment cover.
- Insert 2 x AA alkaline batteries into the battery compartment, as shown. Follow the polarity (+/-) diagram in the battery compartment.
- Replace the battery cover.
Plug-in Power Adapter
Plug the power adapter into a power outlet.
IMPORTANT: Batteries are a backup power source to preserve records in the event of a power outage. A power adapter is required as the power source of this product.
PLEASE
DISPOSE OF OLD OR DEFECTIVE BATTERIES IN AN ENVIRONMENTALLY SAFE WAY AND IN
ACCORDANCE WITH YOUR LOCAL LAWS AND REGULATIONS.
BATTERY SAFETY: Clean the battery contacts and also those of the device prior
to battery installation. Remove batteries from equipment that is not to be
used for an extended period of time. Follow the polarity (+/-) diagram in the
battery compartment. Promptly remove dead batteries from the device. Dispose
of used batteries properly. Only batteries of the same or equivalent type as
recommended are to be used. DO NOT incinerate used batteries. DO NOT dispose
of batteries in fire, as batteries may explode or leak. DO NOT mix old and new
batteries or types of batteries (alkaline/standard). DO NOT use rechargeable
batteries. DO NOT recharge non-rechargeable batteries. DO NOT short-circuit
the supply terminals.
Set the Time & Date
Press and hold the “SET” button, located on the back of the clock, to enter
SET MODE. Once in SET MODE the preference you are currently setting will blink
on the clock.
To adjust the currently selected (flashing) item, press and release the or “
“ buttons (press and HOLD to fast adjust).
To save your adjustments, press and release the “SET” button to adjust the
next preference. The preference set order is as follows:
*AUTO DST (ON or OFF)*
CLOCK HOUR
CLOCK MINUTE
CALENDAR MONTH
CALENDAR DAY
CALENDAR YEAR
TEMPERATURE UNITS (ºF or ºC)
You will automatically exit SET MODE if no buttons are pressed for 4 seconds.
Enter SET MODE at any time by pressing AND HOLDING the “SET” button. If you
live in an area that observes daylight saving time, DST should be set to ON.
Care & Maintenance
Clock Care
Clean with a soft, damp cloth. Do not use caustic cleaners or abrasives. Keep
away from dust, dirt and moisture. Clean ventilation ports regularly with a
gentle puff of air.
Specifications
| TEMPERATURE RANGE | 32ºF to 122ºF; 0ºC to 50ºC |
|---|---|
| POWER | 9-ft. 5V, 1.2A power adapter (included) |
2 x AA alkaline batteries (for backup; optional)
FCC Information
This device complies with part 15 of FCC rules. Operation is subject to the
following two conditions:
1- This device may NOT cause harmful interference, and
2- This device must accept any interference received, including interference
that may cause undesired operation.
WARNING: Changes or modifications to this unit not expressly approved by
the party responsible for compliance could void the user’s authority to
operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of the FCC rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses and
can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation.
NOTE: The manufacturer is not responsible for any radio or TV
interference caused by unauthorized modifications to this equipment. Such
modifications could void the user authority to operate the equipment. This
device complies with Industry Canada licence-exempt RSS standard(s).
Customer Support
AcuRite customer support is committed to providing you with best-inclass service. For assistance, please have the model number of this product available and contact us in any of the following ways:
---|---
24/7 support at www.AcuRite.com
| ► Installation Videos | ► Register your Product |
|---|---|
| ► Instruction Manuals | ► Support User Forum |
| ► Replacement Parts | ► Submit Feedback & Ideas |
Limited One Year Warranty
At AcuRite, we proudly uphold our commitment to quality technology. Chaney Instrument Co. warrants that all products it manufactures be of good material and workmanship and to be free of defects when properly installed and operated for a period of one year from the date of purchase.
We recommend that you visit us at www.AcuRite.com for the fastest way to register your product. However, product registration does not eliminate the need to retain your original proof of purchase in order to obtain warranty benefits.
Chaney Instrument Co. warrants that all products it manufactures be of good material and workmanship and to be free of defects when properly installed and operated for a period of one year from the date of purchase. Remedy for breach of this warranty is limited to repair or replacement of the defective item(s). Any product which, under normal use and service, is proven to breach the warranty contained herein within ONE YEAR from the date of sale will, upon examination by Chaney, and at its sole option, be repaired or replaced by Chaney. Transportation costs and charges for returned goods shall be paid for by the purchaser. Chaney hereby disclaims all responsibility for such transportation costs and charges. This
warranty will not be breached, and Chaney will give no credit for products it manufactures which have received normal wear and tear, been damaged (including by acts of nature), tampered, abused, improperly installed, damaged in shipping, or repaired or altered by others than authorized representatives of Chaney. The above-described warranty is expressly in lieu of all other warranties, express or implied, and all other warranties are hereby expressly disclaimed, including without limitation the implied warranty of merchantability and the implied warranty of fitness for a particular purpose. Chaney expressly disclaims all liability for special, consequential or incidental damages, whether arising in tort or by contract from any breach of this warranty. Some states do not allow the exclusion or limitation of incidental or consequential damages, so the above limitation or exclusion may not apply to you. Chaney further disclaims all liability from personal injury relating to its products to the extent permitted by law. By acceptance of any of Chaney’s products,
the purchaser assumes all liability for the consequences arising from their
use or misuse. No person, firm, or corporation is authorized to assume for
Chaney any other liability in connection with the sale of its products.
Furthermore, no person, firm, or corporation is authorized to modify or waive
the terms of this paragraph, and the preceding paragraph, unless done in
writing and signed by a duly authorized agent of Chaney. This warranty gives
you specific legal rights, and you may also have other rights which vary from
state to state. For in-warranty claims: Chaney Instrument Co.
965 Wells St., Lake Geneva, WI 53147
It’s more than accurate, it’s 
AcuRite offers an extensive assortment of precision instruments, designed to
provide you with information you can depend on to Plan your day with
confidence™.
www.AcuRite.com
Printed in China
75100C INST 063015
©Chaney Instrument Co. All rights reserved. AcuRite is a registered trademark of the Chaney Instrument Co., Lake Geneva, WI 53147. All other trademarks and copyrights are the property of their respective owners. AcuRite uses patented technology. Visit www.AcuRite.com/patents for details.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>