AGPTEK OW-02 Wireless Charging Stand User Manual
- June 13, 2024
- AGPTEK
Table of Contents
AGPTEK OW-02 Wireless Charging Stand
Preface
Thank you for purchasing our company’s product. For optimum operation, please read this manual carefully before use. If you have any problem about this device, please feel free to contact support@agptek.com.
Precautions
- Do not store/use it in high temperature, humidity, dirty areas or strong magnetic fields.
- Keep it out of the reach of children.
- Do not expose it to water or heavy dust. Keep it dry and clean.
- Non-professionals are not allowed to disassemble and repair it without authorization.
Product Details
Specifications
Input 5V/3A 9V/3A 15V/2A 20V/1 5A
Output (for Phone): 15W Max
Output (for TWS Earbuds): 5W Max
Output (for Apple Watch): 3W Max
Charging Frequency: 1 05-205KHz
Induction Distance: 0-6mm/0-0.24in
Conversion Rate: ~ 75%
How It Works
Wireless Charging Area 1 for Phone:
Step 1: Make sure your phone supports wireless charging function:
Step 2 : Unfold the wireless charging stand and pull up to the size of holding a phone;
Step 3: Place the phone vertically in the middle position;
Wireless Charging Area for Apple Watch:
Step 1: Only available for Apple Watch SE and 2nd Gen Apple Watches or
later, please check your watch model;
Step 2: Align the bottom of the watch with the charging induction area to
charge;
Wireless Charging Area for TWS Earbuds:
Confirm if the earbuds supports wireless charging function, such as AlrPods Pro/ AlrPods 3/ AirPods 2 wireless charging version. Please note that there are wired charging version and wireless charging version for AlrPods 2, and only the wireless charging version is available, please check before use.
Wireless Charging Area 2 for Phone:
Step 1: Make sure your phone supports wireless charging function;
Step 2: Place the phone right in the wireless charging area aligning with
the coil, or it may not charge.
Indicator Lights Instructions:
Power On: All Red Lights;
While Charging: Blue Light;
Cases of No Charging:
-
The device has no wireless charging function;
-
You don’t use a QC3.0 (30W) charger.
-
The equipment is not placed in the correct position:
-
The charging stand is not stretched to the corresponding height according to the scale requirements;
-
The position of the phone or earphone is offset;
-
The phone or earphone is with a very thick protective cover when charging;
-
The wireless charger is in contact with metal or magnetic materials such as keys, coins, bank cards, etc.
FAQ
Q1: Why is charging slow?
Usually it takes within 4 hours to fully charge your device using wireless charging. If it exceeds 4 hours, please check if the adapter used is a QC3.0 (30W) fast charging adapter.
Q2: Why fail to charge or multiple devices can not be charged at the same time?
- Please check if the red lights will normally turn on after power on, if not, please replace the adapter or charging cable:
- Please check if the adapter used is a QC3.0 (30W)fast charging adapter:
- Please check if the phone, earphone or watch is placed in the correct position.
Q3: Why the charging is interrupted or can not be fully charged?
- Check if the “Optimized Battery Charging” is turned on on the iPhone/iWatch. If so, the charging will turn into trickle charging when it is charged up to 80%;
- Please check if use a QC3.0 (30W)fast charging adapter; if not, the power supply will be insufficient, causing the charging will be interrupted or not fully charged;
- Please check if the phone is placed in the correct position for charging, or is offset during charging, which will affect charging.
- When the charging temperature is way too high, the phone, earphone or watch will activate the temperature protection and stop charging; and will recharge again after the temperature drops.
- It’s normal that suspend charging when the device is charged within 90-100%, and it can be relocated to the wireless charger for charging.
Manufacturer :
Anhui Jibing Chuanglian Technology Co., Ltd.
Address :
The whole building, No.6, North Guiyang Road, Economic
Development Zone, Feeding County, Hefei City, Anhui Province
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>