HAVOC OFFROAD HFB-02-004 Steel Bender Front Bumper Skid Plate Instruction Manual
- June 13, 2024
- HAVOC OFFROAD
Table of Contents
HAVOC OFFROAD HFB-02-004 Steel Bender Front Bumper Skid Plate
Components and Hardware:
1. Skid Plate …………………………………………………………………………….(1)
Tools for Installation:
- 15mm Socket Wrench
Skid Plate
- Remove OE bolts from front, loosen rear 2 bolts. Remove OE skid plate.
- Install HAVOC skid plate by sliding rear tabs onto rear bolts, pivot and align front holes. Use previously removed OE bolts. Tighten all hardware.
Customer Support
HAVOC OFFROAD
SERVICE/SUPPORT: M-F 8am – 6pm EST
1-855-460-6800 | EMAIL:
support@havocoffroad.com
FOR WARRANTY INFORMATION VISIT:
www.havocoffroad.com
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>