HAVOC OFFROAD HFB-08-007 Center Console Vault Installation Guide

HAVOC OFFROAD HFB-08-007 Center Console Vault Installation Guide

1. 2. Left                                                           Right

Components and Hardware:

Tools for Installation:

• Screwdriver (included)
• Wrench (included)

1. Empty the center console of any content.
   

2. Position the side panels into the center console.
   Make sure the 2 side panel tabs are on the top and pointed toward the back of the console.
   

3. Locate the 2 holes on the bottom of each side panel. Using the provided screws, affix side panels to the bottom of the center console.
   

4. There a 4 studs on the under side of the top panel. Align the 4 studs of the top panel to the hole in the side panels.
   

5. Open the door on the top panel by rotating the combination lock. Use the provided nuts on the screw studs to secure the top panel to the side panels.
   

6. The vault installation is now complete. Use the next steps to set the combination lock.
   

7. Do not remove the lock to set the combination code.
   The factory preset code is 0-0-0. Please ensure the combination is set to this code before beginning.
   

8. Press down the reset button with a sharp tool or paper clip. Continue to press down until you have set your personalized combination in the next step.
   

9. Scroll the dials to set your combination then release the button. If the combination is forgotten then simply repeat these steps.
   

References

• Havoc Offroad Accessories

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>