ASTRALPOOL 900 Lumiplus Essential PAR56 RGB Instruction Manual

ASTRALPOOL 900 Lumiplus Essential PAR56 RGB

IMPORTANT: The instruction manual you are holding includes essential information on the safety measures to be implemented for installation and start-up. Therefore, the installer as well as the user must read the instructions before beginning installation and start-up. Keep this manual for future reference.

Product Information

• The LUMIPLUS ESSENTIAL RGB Remote Control is a device used to operate a lamp.
• The remote control enables the creation of different lighting scenarios, including Fade 1, Fade 2, Smooth, Flash, Red, Purple, Green, Cyan, Blue, White, Orange, and Off.
• The lamp should only be operated underwater and anchored to the vertical walls of the pool.
• The lamp should receive a voltage of no more than 12V AC.
• The remote control has an extendable antenna for better signal coverage.
• The remote control should be held at least 2 meters away from the projector.
• The remote control is activated by clicking the side selector.
• The remote control operates on a 12V battery of type 23A.

Product Usage Instructions

1. Click the side selector to activate the remote control (A).
2. Extend the antenna to ensure good signal coverage (B).
3. Hold the remote control at least 2 meters away from the projector.
4. To create different lighting scenarios, use the buttons on the remote control to select Fade 1, Fade 2, Smooth, Flash, Red, Purple, Green, Cyan, Blue, White, Orange, or Off.
5. Ensure that the lamp receives a voltage of no more than 12V AC.
6. Operate the lamp only underwater and anchor it to the vertical walls of the pool.
7. Replace the remote control’s battery with a 12V type 23A battery when needed.

DIMENSION

IMPORTANT: The instruction manual you are holding includes essential information on the safety measures to be implemented for installation and start-up. Therefore, the installer as well as the user must read the instructions before beginning installation and start-up. Keep this manual for future reference.
To achieve optimum performance of the RGB remote control, follow the instructions provided below:

• Click the side selector to activate the remote control (A).
• Extend the antenna to ensure good signal coverage (B).
• Hold the remote control at least 2 meters from the projector.

The lamp is operated by a remote control that is supplied with it. It enables the following scenarios to be created: 1. Fade 1 / 2. Fade 2 / 3. Smooth / 4. Flash / 5. Red / 6. Purple / 7. Green / 8. Cyan / 9. Blue / 10. White / 11. Orange / 12. Off.
In both cases, you should make sure that the voltage received by the lamp is never more than 12V AC. The lamp should only be operated underwater and anchored to the vertical walls of the pool.
It has a 12 V battery of 23 A.

SIMPLIFIED EU DECLARATION OF CONFORMITY.

SACOPA SAU hereby declares that the radio equipment type 75775 is in compliance with Directives 2014/53/EU and 2015/863/EU.

We reserve to change all or part of the articles or contents of this document, without prior notice

Fluidra S.A.-Astralpool | Avda.
Alcalde Barnils, 69, 08174 Sant Cugat del Vallès, Barcelona, Spain,
www.astralpool.com
Made by NIF A-17092610

Made in China

References

• Español

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>