Instruction Manual

C1R8AMqOfGL Flawless Brows Eyebrow Hair Remover

PLEASE NOTE: The more you use the Finishing Touch Flawless™ Brows hair remover, the more precise your results will be. Please allow for your hair and skin to become accustomed to this new innovative way to remove hair.
Warning

• Keep out of reach of children.

• Only use for ts intended use as described in this manual.

• Do not use onrritated skin, open wounds or if you are experiencing breakouts. Discontinue use if skin irritation occurs.

• Do not rinse head or unit under water, or submerge.

• Do not dispose of battery in fre.
  Battery may explode o eak.

• Dispose of old batteries according toall applicable local regulations.

Installing / Changing Battery

• Remove cap.
• Hold top and bottom of unit and pull apart to reveal battery compartment (Image 1).
• Place 1x AAA battery (included) into battery compartment as indicated (Image 2).
• Slide/snap bottom casing back nto place.

NOTE: Prior to first use, test the unit on a small area. If any sensitivity or allergic reactions occur, discontinue use immediately.
Do not use the unit on sensitive or irritated areas.

How to Use

• Slide switch to ON position (Image 3). Light will turn on.
• Use on clean, dry skin. Pull skin tight and move in small back and forth motions (Image 4).

NOTE: Itis normal for hair removal head to become warm with use.

For Optimal Results

• Use on clean and completely dry skin with no cream or cosmetic residue.
• Pull skin tight and move in small back and forth motions (Image 4).
• If unit begins to slow down, clean head of hair residue.
• If unit is still running slow, change battery.
• It is normal for skin to appear red immediately after use due to pressure and friction applied.

Cleaning (Be sure unit is off)

• After each use, clean head with included brush.
• Twist head counter-clockwise and lift off (Image 5).
• Gently brush away hair residue on stem (c) (Image 6A).
• Use brush inside head (Image 6B).
• Place head back on unit and twist clockwise until it locks back in place.

GRAVITY//AMPLYFY//PHOTOTYPE
SMART ART PRODUGTION ART INFORMATION
PROJECT

: 2123474 Wave_1

SKU JOB #: 2123561
FILE NAME: PA2123561_R3.ai
CONTACT: Bev Green
E-MAIL: bev green@olberdingbrands.com Church & Dwight Co, Inc
500 Charles Ewing Boulevard
Ewing, NJ 08628
8008339532
MECHANICAL: ROUND 3
JOB INFORMATION
JOB DESCRIPTION: Flawless Amazon Brow 3.0 battery Instruction Manual
BRAND: Flawless
FRONT MATERIAL #:
BACK MATERIAL #:
FRONT COPY CODE # FLIN-54443-01UK
BACK COPY CODE #:
UPC#:
LAST REVISION DATE: 11/24/2021
ADDITIONAL JOB INFORMATION (if available)
PRINT PROCE: NA
PRINTER: No Company Info At This Time
SUBSTRATE: Paper
PRINTER DIE#:
JOB SIZE:
C&D APPROVALS
IP#:
LIMITATION OF LIABILITY
DO NOT PLATE, ENGRAVE, OR PROCEED TO PRESS WITH THIS FILE WITHOUT PROPER INSPECTION
All files and proofs must be thoroughly inspected by the recipient immediately upon receipt. It is the responsibility of the recipient to examine and proofread all files and proofs. Inthe event file(s) and/or proof(s) are found to be incorrect upon inspection, call 513-281-0999 and ask for the separation contact. The liability of Olberding Brand Family shall be limited to correcting and replacing the materials that we supplied that were found to be defective. Olberding Brand Family will not be liable for any other loss or damage including, but not limited to, cost of Flexo printing plates that we did not make, print cylinders, inks, substrates/printed materials, and/or make ready and press time.
FRONT COLORS
BACK COLORS

Imported and Distributed By:
Church & Dwight UK Lid.,
Folkestone, Kent, CT19 6PG
SOFIBEL SAS
110-114 rue Victor Hugo
92686 Levallois Perret Cedex- France
www.fnishingfouchflawless.co.uk
Model #: FTFB38
Made in China

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>