nordlux Vic 29 LED Light Vic 22 LED Light Instruction Manual
- June 13, 2024
- nordlux
Table of Contents
nordlux Vic 29 LED Light Vic 22 LED Light
Product Information
The product features a non-replaceable light source.
Product Usage Instructions
- Ensure the product is connected to a power source.
- Turn on the power switch located on the product.
- The non-replaceable light source will illuminate once the power is turned on.
- Adjust the product’s settings, if applicable, to control the brightness or color temperature of the light.
- To turn off the light, simply switch off the power switch.
- Avoid touching the non-replaceable light source directly as it may cause damage or reduce its lifespan.
- If the light source malfunctions or stops working, contact the manufacturer for assistance, as it cannot be replaced by the user.
- Follow any additional instructions provided by the manufacturer for proper care and maintenance of the product.
WHAT’S IN THE BOX
INSTALLATION INSTRUCTION
- This product contains a light source of energy efficiency class
. - IP40: The lamp should only be installed in areas where direct contact with water cannot occur.
- Class II: The lamp is double-insulated and does not need to be connected to the yellow/green earth wire.
- The mounting instruction must not be discarded .
- IMPORTANT! Always shut off power to the circuit before starting installation work.
- In some countries, electrical installation work may only be carried out by an authorized electrical contractor.
- Contact your local electricity authority for advice.
- The light source contained in this luminaire shall only be replaced by the manufacturer his service agent or a similar qualified person.
- For indoor use only.
- nordlux·
- www.nordlux.com
- Nordlux A/S. 0stre Havnegade 34. DK-9OOO Aalborg
- Monteringsanvisning I Montageanleitung I Mounting instruction
- lnstallalionsanvisningar
- Instructions de montage
- Montage-instructions
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>