Mytrix TP5-2517 Charging Stand For PS VR2 Controllers User Guide

: May 15, 2024
: mytrix

Table of Contents

Product Overview
Product Features
Specifications
Package Contents
Assembly and Charging Setup
Charging Indicators
Warranty
Customer Support
Read User Manual Online (PDF format)
Download This Manual (PDF format)

Mytrix TP5-2517 Charging Stand For PS VR2 Controllers

Mytrix TP5-2517 Charging Stand For PS VR2 Controllers

Product Overview

Product Features

All-in-One Charging Stand: Charge, store and display all of your PS VR2 components and headsets in one place.
Fast Charging: Fully charge two PS VR2 controllers simultaneously within 1.5 to 2 hours.
Magnetic Charging: Magnetic connectors for the controllers make the charging process effortless and convenient.
Touch Switch for All Light: Allows you to turn on or off all the orange and blue LED charge status indicators.
Intelligent Charging Protection: The intelligent MCU chipset ensures safe and efficient charging, protecting against overcharge, overvoltage, low voltage, overcurrent and short circuits.

Specifications

Average Charging Time: 1.5~2 hours
USB-C Power Input: DC 5V 1.5A
Charging Current for Each Controller: 500mA
Package Size: 26517585mm
Weight: 460g
Working Temperature: -10℃~40℃
Storage Temperature: -40℃~60℃

Package Contents

1 x Charging Dock
1 x VR Headset Tray
1 x 80cm USB-A to USB-C Cable
2 x Magnetic USB-C Connectors(male)
1 x User Manual

Assembly and Charging Setup

Insert the VR headset tray into the groove in the middle of the base.
Connect the charging base to a power source with a 5V 2A power adapter or the USB-A port of PS5 console using the included USB-A to USB-C cable. And turn on the PS5 console to power on the dock.
Once the dock is powered on, it will automatically run a self-test check. The two controller holders and the top tray for R headset will light up orange and then turn to a static blue, indicating that the product is powered on normally and in standby mode.
Insert the two provided magnetic connectors(male) into the Magnetic USB-C ports on both controllers.
Place the controllers on the holders of the charging base. The USB-C magnetic adapters will automatically align with the charging magnetic slots, and the controllers will begin charging.
Placement of VR Headset: While the left and right controllers are charging, the unused VR headset can be placed on the headset tray. The product is perfectly integrated with the VR headset, which is beautiful and convenient for storage.

Please Note: In order to ensure fast charging, it is recommended to use a 5V 2A adapter. If the power supply is less than 5V 1.5A and does not meet the power requirements of the controller, it may not charge properly

Charging Indicators

Power-Up: When the charging dock is connected to power, the two controller holders and the top tray for VR headset will light up orange and then turn to static blue.
Charging Controllers: The controller holder(s) will illuminate with a slow breathing effect in orange light while charging. The VR headset tray will also light up with an orange breathing effect when any controller is being charged.
Fully charged/Standby: The controller holder(s) light will turn to static blue when the controller(s) is fully charged. The headset tray will turn to static blue light only when both controllers are fully charged.
ON/OFF: By default, all charging indicator lights are turned on when the product is powered on. However, you can turn off the lights by touching the “Touch Switch” once, and touch it again to turn on the lights again.

Please Note: The dock can continue to charge the controller(s) when all the lights are turned off.

Cautions

Please use only the cables and accessories included with the product to ensure proper operation.
Place the product on a flat surface in a well-ventilated area during use.
If the product will not be used for an extended period of time, disconnect the power supply.
Do not store or use the product in a damp or high-temperature environment.
Do not put any metal objects into the controller charging slots to avoid short circuits and prevent damage to the product.
When cleaning the product, disconnect the power supply and use a dry cloth. Do not use water or alcohol, as it can enter the product through the heat dissipation holes, resulting in short circuit damage.
If the product becomes wet or is damaged, stop using it immediately and send it to a professional maintenance department for repair. Do not disassemble or modify the product privately and keep it out of reach of children.

Warranty

The product is covered by a 1-year limited warranty. Our priority is to provide complete customer satisfaction, so we make every effort to understand our customer’s needs and meet their expectations. If you have any questions, don’t hesitate to reach out to us at cs@igrl.io. Our customer service team will be more than happy to assist you.